Lenovo E2223s User Guide

E2223s
User's Guide

Wide Flat Panel Monitor

Product numbers

60AF-HAR1-WW

First Edition (June 2013)
© Copyright Lenovo 2013.

LENOVO products, data, computer software, and services have been developed exclusively at private expense and are

by

sold to governmental entities as commercial items as defined
reproduction and disclosure.

AND

LIMITED
a General Services Administration "GSA" contract, use, reproduction,
Contract No. GS-35F-05925.

RESTRICTED RIGHTS NOTICE:

If

products, data, computer software, or services are delivered pursuant

48 C.F.R. 2.101 with limited and restricted rights to use,

or

disclosure is subject to restrictions set forth

in

Contents

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

General Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Notice for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

T ypes of adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Monitor controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Cable lock slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Setting up your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Connecting and turning on your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Chapter 2. Adjusting and using your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Comfort and accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Arranging your work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Positioning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Quick tips for healthy work habits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Accessibility information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Adjusting your monitor image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Using the direct access controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Using the On-Screen Display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Selecting a supported display mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Understanding power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Caring for your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Detaching the monitor base and stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Chapter 3. Reference information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Monitor specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Manual image setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Manually installing the monitor driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Installing the monitor driver in Windows 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Installing the monitor driver in Windows 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Installing the monitor driver in Windows 8.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Getting further help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Customer responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Service parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Appendix A. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Online technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

T elephone technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Appendix B. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Recycling information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Contents ii

Safety information

Before installing this product, read the Safety Information.

General Safety guidelines

For tips to help you use your computer safely, go to:
http://www.lenovo.com/safety

ííí

Safety information iii

Chapter 1.Getting started

This User’s Guide contains detailed information on your Flat Panel Monitor. For a quick

overview, please see the Setup Poster that was shipped with your monitor.

Shipping contents

The product package should include the following items:

• SetupPoster

• ReferenceandDriverCD

• FlatPanelMonitor

• PowerCable

• DVICable

• AnalogInterfaceCable

Notice for use

To set up your monitor, please see the illustrations below.

Note: Do not touch the monitor within the screen area. The screen area is glass and can be

damaged by rough handling or excessive pressure.

1. Carefully lay the monitor on a at surface.

2. Put the base to the monitor.

Note: To attach a VESA mount, please see "Wall Mounting (Optional)"on page 2-8.

Chapter 1. 1-1

Product overview

This section will provide information on adjusting monitor positions, setting user controls,

and using the cable lock slot.

Types of adjustments

Tilt

Please see the illustration below for an example of the tilt range.

Monitor controls

Your monitor has controls on the front which are used to adjust the display.

-5° 22°

For information on how to use these controls, please see “Adjusting your monitor image”
on page 2-3.

Cable lock slot

Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the
lower position).

Chapter 1. 1-2

Setting up your monitor

This section provides information on how to set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information located on page iii before carrying out this

procedure.

1. Power off your computer and all attached devices, and unplug the computer power
cord.

2. Connect the cables according to below icon indication.

3. Connect one end of the analog signal cable to the monitor D-SUB connector and the
other end to the computer.

Chapter 1. 1-3

4. Connect the digital cable to the DVI connector of the monitor and the other end on the
back of the computer.

5. Insert the power cord into the monitor, then plug the monitor power cord and the
computer cord into grounded electrical outlets.

Note: A certied power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certied
power supply cord not lighter than ordinary polyvinyl chloride exible cord
according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2
3G0.75mm2) shall be used. Alternative a exible cord be of synthetic rubber
according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.

Chapter 1. 1-4

6. Power on the monitor and the computer.

7. To install the monitor driver, insert the Reference and Driver CD, click Install driver,

and follow the on-screen instructions.

8. To optimize your monitor image, press the Automatic Image Setup key. Automatic
image setup requires that the monitor is warmed up for at least 15 minutes. This is not

required for normal operation.

Note: If automatic image setup does not establish the image that you prefer, perform
manual image setup. See “Manual image setup” on page 3-3 .

Chapter 1. 1-5

Registering your option

Thank you for purchasing this Lenovo™ product. Please take a few moments to register
your Product and provide us with information that will help Lenovo to better serve you
in the future. Your feedback is valuable to us in developing product and services that are

important to you, as well as in developing better ways to communicate with you. Register
your option on the following Web site:
http://www.lenovo.com/register

Lenovo will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further information.

Chapter 1. 1-6

Chapter 2.Adjusting and using your monitor

This section will give you information on adjusting and using your monitor.

Comfort and accessibility

Good ergonomic practice is important to get the most from your personal computer and
to avoid discomfort. Arrange your workplace and the equipment you use to suit your
individual needs and the kind of work that you perform. In addition, use healthy work
habits to maximize your performance and comfort while using your computer. For more

detailed information on any of these topics, visit the Healthy Computing Web site at: http://
www.lenovo.com/healthycomputing/.

Arranging your work area

Use a work surface of appropriate height and available working area to allow you to work
in comfort.
Organize your work area to match the way you use materials and equipment. Keep your
work area clean and clear for the materials that you typically use and place the items that
you use most frequently, such as the computer mouse or telephone, within the easiest reach.
Equipment layout and setup play a large role in your working posture. The following topics
describe how to optimize equipment setup to achieve and maintain good working posture.

Positioning your monitor

Position and adjust your computer monitor for comfortable viewing by considering the
following items:

• Viewingdistance:Optimal viewing distances for monitors range from approximately

510mm to 760mm (20 in to 30 in) and can vary depending on ambient light and time

of day. You can achieve different viewing distances by repositioning your monitor
or by modifying your posture or chair position. Use a viewing distance that is most
comfortable for you.

• Monitorheight:Position the monitor so your head and neck are in a comfortable and

neutral (vertical, or upright) position. If your monitor does not have height adjustments,
you might have to place books or other sturdy objects under the base of the monitor

to achieve the desired height. A general guideline is to position the monitor such that

the top of the screen is at or slightly below your eye-height when you are comfortably
seated. However, be sure to optimize your monitor height so the line of site between

your eyes and the center the monitor suits your preferences for visual distance and
comfortable viewing when your eye muscles are in a relaxed state.

• Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content

and to accommodate your preferred head and neck posture.

• Generallocation:Position your monitor to avoid glare or reections on the screen

from overhead lighting or nearby windows.

Chapter 2. 2-1

The following are some other tips for comfortable viewing of your monitor:

• Use adequate lighting for the type of work you are performing.

• Use the monitor brightness, contrast, and image adjustment controls, if equipped, to

optimize the image on your screen to meet your visual preferences.

• Keep your monitor screen clean so you can focus on the screen’s contents.

Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to
periodically look away from your monitor screen and focus on a far object to allow your

eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a
vision care specialist for advice.

Quick tips for healthy work habits

The following information is a summary of some important factors to consider to help you
remain comfortable and productive while you use your computer.

• Goodposturestartswithequipmentsetup:The layout of your work area and the
setup of your computer equipment have a large effect on your posture while using

your computer. Be sure to optimize the position and orientation of your equipment
by following the tips outlined in “Arranging your work area” on page 2-1 so you can
maintain a comfortable and productive posture. Also, be sure to use the adjustment
capabilities of your computer components and ofce furniture to best suit your

preferences now and as your preferences change over time.

• Minorchangesinposturecanhelpavoiddiscomfort: The longer you sit and work
with your computer, the more important it is to observe your working posture. Avoid
assuming any one posture for an extended period of time. Periodically make minor

modications in your posture to help deter any discomforts that might arise. Make use
of any adjustments that your ofce furniture or equipment provide to accommodate

changes in posture.

• Short,periodicbreakshelpensurehealthycomputing:Because computing is

primarily a static activity, it is particularly important to take short breaks from your
work. Periodically, stand up from your work area, stretch, walk for a drink of water, or
otherwise take a short break from using your computer. A short break from work gives
your body a welcome change in posture and helps to ensure you remain comfortable
and productive while you do work.

Accessibility information

Lenovo is committed to providing greater access to information and technology to people
with disabilities. With assistive technologies, users can access information in the way most

appropriate to their disability. Some of these technologies are already provided in your
operating system; others can be purchased through vendors or accessed at:
http://www-03.ibm.com/research/accessibility/requests/accvpat.nsf/lenovo-bidx?OpenForm

Chapter 2. 2-2

Adjusting your monitor image

This section describes the control features to adjustyour monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not displayed.

Table2-1.Directaccesscontrols

Icon Control Description

Input Change Switches the video input source.

DDC-CI

Exit Exit from menu

Image Setup Activates automatic image adjustment.

Brightness Direct access to Brightness adjustment.

Menu Enter menu

Press and hold for 10 seconds to enable or disable the

DDC-CI function

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.

To use the controls:

1. Press to open the main OSD menu.

2. Use or to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or , then
press to select that function. Use or to make adjustments. Press to save.

3. Press to move backwards through the sub-menus and exit from the OSD.

4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and
allow adjustments to the OSD.

5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the button for 10
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"or"DDC/CI
enable" shows on the screen.

Chapter 2. 2-3

Table2-2.OSDfunctions

OSDIconon

MainMenu

Brightness/

Contrast

Image Position

Image Setup

Image Properties

Submenu Description

Adjusts overall screen

Brightness

brightness

Adjusts difference between

Contrast

Horizontal Position

Vertical Position

Automatic

light and dark areas

Moves image left or right.

Moves image up or down.

Optimizes image (size, position, phase and clock).

Manually optimizes image. See “Manual image
setup” on page 3-3.

Manual

• Clock

• Phase

• Save

Adjusts intensity of red, green, and blue.

Preset mode

• Neutral

• sRGB

• Reddish

• Bluish

Custom

Color

• Red: Increases or decreases the saturation of

'red' in the image.

• Green: Increases or decreases the saturation

of 'green' in the image.

• Blue: Increases or decreases the saturation of

'blue' in the image.

• Save: Saves the custom color choices.

Controlsand
Adjustments

(Analog)

Controlsand

Adjustments(DVI)

Same as Analog

Controls Locked - not

required for DVI input

Same as Analog

Input signal

Scaling

This monitor can accept video signals through two
different connectors. Most desktop computers use

a D-SUB connector. Select digital among OSD

Controls when you use DVI connector.

• Selects D-SUB (Analog)

• Selects DVI (Digital)

• Selects type of scaled image.

• Original AR:Same Aspect Ratio with input

signal.

• Full Screen: Expand image to full screen.

Chapter 2. 2-4

Table2-2.OSDfunctions

OSDIconon

MainMenu

Options

Submenu Description

Shows resolution, refresh rate, and product details.

Information

Note: This screen does not allow any changes to

the settings.

Changes languages of menu.

Note: The language chosen only affects the

Menu Language

language of the OSD. It has no effect on any

software running on the computer.

Adjusts menu location

Default
Default returns the menu position to the default
settings.
Custom

Menu Position

• Horizontal: Changes the horizontal position
of the OSD.

• Vertical: Changes the vertical position of the
OSD.

Save: save the custom position choices

Reset monitor to the original settings.

Factory default

• Cancel

• Reset

Controlsand
Adjustments

(Analog)

Controlsand

Adjustments(DVI)

Same as Analog

Exit

Accessibility

Changes button repeat rate and menu time-out

setting.

Button repeat rate:

Select

or to change.

• Off

• Default

• Slow

Menu time out: Sets the length of time the

OSD will remain active after the last time a button

is pressed.

Exit from menu.

Chapter 2. 2-5

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This

is normal and the image can be readjusted using automatic image setup and the image

controls.

Unlike CRT monitors, which require a high refresh rate to minimize icker, LCD or Flat
Panel technology is inherently icker-free.

Note: If your system has previously been used with a CRT monitor and is currently
congured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-congured the system; preferably to
1920x1080 at 60 Hz, which is the Native Resolution Display mode.

The display modes shown below have been optimized at the factory.

Table2-3.Factorysetdisplaymodes

Addressability Refreshrate

640x350 70Hz

640x480 60Hz, 72Hz,75Hz

720x400 70Hz

800x600 56Hz, 60Hz, 72Hz, 75Hz

832x624 75Hz

1024x768 60Hz, 70Hz, 75Hz

1152x864 75Hz

1280x1024 60Hz, 70Hz, 75Hz

1366x768 60Hz

1440x900 60Hz

1600x900 60Hz, 75Hz

1680x1050 60Hz

1920x1080 60Hz

Chapter 2. 2-6

Understanding power management

Power management is invoked when the computer recognizes that you have not used your

mouse or keyboard for a user-denable period. There are several states as described in the

table below.

For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.

Table2-4.Powerindicator

State

Power
Indicator

Screen RestoringOperation Compliance

On Green Normal

Standby/
Suspend

Amber Blank Press a key or move the

mouse
There may be a slight delay
before the image reappears

Note: Standby also occurs if

there is no image output to the
monitor

Off Off Blank Press the power button

There may be a slight delay
before the image reappears

ENERGY STAR

ENERGY STAR

Chapter 2. 2-7

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:

• Apply water or liquid directly to your monitor.

• Use solvents or abrasives.

• Use ammable cleaning materials to clean your monitor or any other electrical

equipment.

• Touch the screen area of your monitor with sharp or abrasive items. This type of

contact may cause permanent damage to your screen.

• Use any cleaner which contains an anti-static solution or similar additives. This may

harm the coating of the screen area.

Do:

• Lightly dampen a soft cloth with water and use this to gently wipe the covers and the

screen.

• Remove grease or nger marks with a damp cloth and a little mild.

Detaching the monitor stand

Step 1: Place the monitor on a soft and at surface.
Step 2: Remove the base and stand from the monitor, then remove the four screws.

Wall Mounting (Optional)

Refer to the instructions that come with the base mounting kit. To convert your LCD display
from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.

Chapter 2. 2-8

Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and
stand".

Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm
x100mm distance), VESA Mounting Screw M4 x 10 mm.

Step 5: Attach the LCD display to the wall, following the instructions in the wall-mounting

kit.

For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg

Chapter 2. 2-9

Chapter 3.Reference information

This section contains monitor specications, instructions to manually install the monitor

driver, troubleshooting information.

Monitor specications

Table3-1.Monitorspecificationsfortype-model60AF-HAR1-WWWide

Dimensions Height

Depth
Width

Panel Size

Backlight
Aspect ratio

Stand Tilt Range: -5

VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)

Image Viewable image size

Maximum height
Maximum width
Pixel pitch

Power input Supply voltage

Max supply current

Power consumption
Note: Power

consumption figures
are for the monitor
and the power supply
combined.

Video input (Analog) Input signal

Video input (DVI) Interface

Communications VESA DDC CI

Supported Display
Modes

Temperature Operating

Humidity Operating

Normal operation
Standby/Suspend
Off
Note: without USB/

Webcam/external speaker

Horizontal addressability
Vertical addressability

Clock frequency

Input Signal
Horizontal addressability
Vertical addressability
Clock frequency

Horizontal frequency
Vertical frequency

Native Resolution 1920x1080 at 60 Hz

Storage
Shipping

Storage
Shipping

379.4 mm (14.94in.)

167.2 mm (6.58 in.)

514.5 mm (20.26 in.)

21.5 in.
LED
16:9

o

o

~22

546.68 mm (21.5 in.)

268.11 mm (10.56 in.)

476.64 mm (18.77 in.)

0.248 mm (0.01 in.) (V)
90-264VAC (100~240VAC+/-10%)

1.5 A

< 22 W
< 0.5 W (Analog), < 0.5W (Digital)
< 0.5 W at 100Vac & 240Vac

Analog Direct Drive, 75 ohm 0.7V
1920 pixels (max)
1080 lines (max)
205 MHz

DVI
VESA TMDS (Panel Link

TM

)
1920 pixels (max)
1080 lines (max)
165 MHz

30 kHz - 83 kHz
50 Hz - 75 Hz

o

0

to 45o C (32o to 113o F)

o

-20

to 60oC (-4o to 140o F)

o

-20

to 60o C (-4o to 140o F)

10% to 80% non-condensing
5% to 95% non-condensing
5% to 95% non-condensing

Chapter 3. 3-1

Troubleshooting

If you have a problem setting up or using your monitor, you might be able to solve it

yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate

to your problem.

Table3-2.Troubleshooting

Problem Possiblecause Suggestedaction Reference

The words "Out
of Range" are

shown on the
screen, and the
power indicator

is ashing green

The image
quality is
unacceptable

The power
indicator is not
lit and there is no
image

The system is set to a
display mode which is
not supported by the
monitor

The video signal cable
is not connected with
the monitor or system
completely

The color settings may
be incorrect

The automatic image
setup function was not
performed

• The monitor’s power

switch is not switched
on

• The power cord is

loose or disconnected

• There is no power at

the outlet

If you are replacing an old monitor,

reconnect it and adjust the display
mode to within the specied range for

your new monitor

If using a Windows system, restart
the system in safe mode, then select
a supported display mode for your
computer

If these options do not work, contact

the Support Center

Be sure the signal cable is rmly

plugged into the system and monitor

Select another color setting from the
OSD menu

Perform automatic image setup “Adjusting your

• Be sure the power cord is

connected properly

• Be sure the outlet has power

•

Power on the monitor

•

Try using another power cord

ry using another electrical outlet

• T

“Selecting a

supported display

mode” on page 2-6

“Connecting and
turning on your

monitor” on page 1-3

“Adjusting your
monitor image” on
page 2-3

monitor image” on
page 2-3

“Connecting and
turning on your

monitor” on page 1-3

Screen is blank

and power
indicator is
amber

The power
indicator is
amber, but there
is no image

One or more of
the pixels appear
discolored

The monitor is in

Standby / Suspend

mode

The video signal cable
is loose or disconnected
from the system or
monitor

The monitor brightness
and contrast are at the
lowest setting

This is a characteristic
of the LCD technology
and is not an LCD
defect

• Press any key on the keyboard or

move the mouse to restore operation

• Check the Power Options settings

on your computer

Be sure the video cable is connected

with the system properly

Adjust the brightness and contrast
setting on the OSD menu

If there are more than ve pixels
missing, contact the Support Center

“Understanding

power m
on page 2-7

“Connecting and
turning on your

monitor” on page 1-3

“Adjusting your
monitor image” on
page 2-3

Appendix A,

“Service and
Support,” on page
A-1

anagement”

Chapter 3. 3-2

Table3-2.Troubleshooting

Problem Possible cause Suggested action Reference

• Fuzzy lines

in text or a

blurryimage

• Horizontal or
vertical lines
through the
image

• Image setup has not
been optimized

• Your system
DisplayProperties
setting have not been
optimized

Adjust the resolution settings on your
system to match the native resolution
for this monitor: 1920x1080 at 60Hz

Perform automatic image setup. If
automatic image setup does not help,
perform manual image setup

When working in the native

resolution, you may nd
additionalimprovements by adjusting
the Dots Per Inch (DPI) setting on
your system

Manual image setup

If automatic image setup does not establish the image that you prefer, perform manual
image setup.

Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.

1. Press at the bottom of the monitor to open the OSD menu.

2. Use or to select and press to access.

3. Use or to select manual and press to access.

4. Use or select Clock and Phase adjustment.

• Clock (pixel frequency) adjusts the number of pixels scanned by one horizontal

sweep. If the frequency is not correct, the screen shows vertical stripes and the
picture does not have the correct width.

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment,

the picture has horizontal disturbances in light picture.

5. When the image no longer looks distorted, save the Clock and Phase adjustments.

6. Press to leave the OSD menu.

“Adjusting your
monitor image” on

page 2-3

“Selecting a
supported display
mode” on page 2-6

See the Advanced
section of your
system’s display
properties

Chapter 3. 3-3

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 8, Microsoft Windows 8.1.

Installing the monitor driver in Windows 7

To use the Plug and Play feature in Microsoft Windows 7, do the following:
Note: You must download le from the Reference and Driver CD to use the Plug and Play

feature in Windows 7.

1. Turn off the computer, all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.

4. Open the Display Properties window by clicking Start, Control Panel and Hardware
and Sound icon. and then clicking the Display icon.

5. Click the Change the display settings tab.

6. Click the Advanced Settings icon.

7. Click the Monitor tab.

8. Click the Properties button.

9. Click the Driver tab.

10. Click Update Driver, then click Browse my computer for driver software.

11. Select Let me pick from a list of device drivers on my computer.

Click the Have Disk button. Click the Browse button and navigate to the following

12.

directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).

Select the "lene2223swa.inf" file and click the Open button. Click the OK button.

13.

Select LENE2223swA and click Next. The files will be copied from the CD to your

14.

hard disk drive.

15. Close all open windows and remove the CD.

16. Restart the system. The system will automatically select the maximum refresh rate and

corresponding Color Matching Proles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.

Chapter 3. 3-4

Installing the monitor driver in Windows 8

To use the Plug and Play feature in Microsoft Windows 8, do the following:
Note: You must download le from the Reference and Driver CD to use the Plug and Play
feature in Windows 8.

1. Turn off the computer, all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the

Windows 8 operating system.

4.

On the Desktop, move mouse to low-right corner of screen, choose

Setting, double

click Control Panel, then double click the icon of Hardware and Sound, and then

clicking Display.

5. Click the Change the display settings tab.

6. Click the Advanced Settings icon.

7. Click the Monitor tab.

8. Click the Properties button.

9. Click the Driver tab.

10. Click Update Driver, then click Browse the computer to nd the driver program.

11. Select Pick from the list of device driver program on the computer.
Click the Have Disk button. Click the Browse b

12.

utton and navigate to the following
directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).

Select the "lene2223swa.inf"file and click the Open button. Click the OK button.

13.
Select LENE2223swA and click Next. The files will be copied from the CD to you

14.

hard disk drive.

15. Close all open windows and remove the CD.

16. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Proles.

r

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.

Chapter 3. 3-5

Installing the monitor driver in Windows 8.1

To use the Plug and Play feature in Microsoft Windows 8.1, do the following:
Note: You must download le from the Reference and Driver CD to use the Plug and Play
feature in Windows 8.1.

1. Turn off the computer, all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the

Windows 8.1 operating system.

4.

On the Desktop, move mouse to low-right corner of screen, choose Setting, double
click Control Panel, then double click the icon of Hardware and Sound, and then

clicking Display.

5. Click the Change the display settings tab.

6. Click the Advanced Settings icon.

7. Click the Monitor tab.

8. Click the Properties button.

9. Click the Driver tab.

10. Click Update Driver, then click Browse the computer to nd the driver program.

11. Select Pick from the list of device driver program on the computer.
Click the Have Disk button. Click the Browse b

12.

utton and navigate to the following
directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).

Select the "lene2223swa.inf"file and click the Open button. Click the OK button.

13.
Select LENE2223swA and click Next. The files will be copied from the CD to your

14.

hard disk drive.

15. Close all open windows and remove the CD.

16. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Proles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.

Getting further help

If you still can’t solve your problem, please contact the Lenovo Support Center. For
more information on contacting the Support Center, please see Appendix A."Service and
Support"on page A-1.

Appendix A. 3-6

Service information

Customer responsibilities

The warranty does not apply to a product which has been damaged due to accident,

misuse, abuse, improper installation, usage not in accordance with product specications

and instructions, natural or personal disaster, or unauthorized alterations, repairs or

modications.

The following are examples of misuse or abuse and not covered by warranty:

• Images burned onto the screen of a CRT monitor. Burned image is preventable by

• Physical damage to covers, bezel, base and cables.

• Scratches or punctures on monitor screens.

Service parts

The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to
supprot
shows information for model 60AF-HAR1-WW.

Table3-3.Listofserviceparts

utilizing a moving screen saver or power management.

the customer warranty. Parts are for service use only. The table below

FRU(FIELD
REPLACEABLEUNIT)
PARTNUMBER

03T8477

03X8000

03T8478

03T8479

DESCRIPTION

E2223s Wide­FRU Monitor

E2223s Wide-Analog
cable (1.8m, RoHS)

E2223s Wide-DVI
cable (1.8m, RoHS)

E22

23s Wide-FRU

Stand and Base

Machine
Type/Model(MTM)

60AF Raven Black

60AF Raven Black

60AF Raven Black

60AF

COLOR

Raven Black

Chapter 3. 3-7

Appendix A. Service and Support

The following information describes the technical support that is available for your

product, during the warranty period or throughout the life of your product. Refer to the

Lenovo Limited Warranty for a full explanation of Lenovo warranty terms.

Registering your option

Register to receive product service and support updates, as well as free and discounted
computer accessories and content. Go to:
http://www.lenovo.com/register

Online technical support

Online technical support is available during the lifetime of a product at: http://www.
lenovo.com/support

Product replacement assistance or exchange of defective components also is available
during the warranty period. In addition, if your option is installed in a Lenovo
computer, you might be entitled to service at your location. A Lenovo technical support
representative can help you determine the best alternative.

Telephone technical support

Installation and conguration support through the Customer Support Center will be
available until 90 days after the option has been withdrawn from marketing. After

that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion.
Additional support is also available for a nominal fee.

Before contacting a Lenovo technical support representative, please have the following
information available: option name and number, proof of purchase, computer

manufacturer, model, serial number and manual, the exact wording of any error message,

description of the problem, and the hardware and software conguration information for

your system.

Your technical support representative might want to walk you through the problem while
you are at your computer during the call.

Telephone numbers are subject to change without notice. The most up-to-date telephone
list for Lenovo Support is always available at:
http://consumersupport.lenovo.com

CountryorRegion TelephoneNumber

Africa: [phone]

Africa

Argentina 0800-666-0011 (Spanish)

Australia 131-426 (English)

Austria Warranty service and support: 01-211-454-610 (German)

South Africa: [phone] and 0800110756
Central Africa: Contact the nearest Lenovo
Business Partner

Appendix A. A-1

CountryorRegion TelephoneNumber

Belgium Warranty service and support: 02-225-3611 (Dutch, French)

Bolivia 0800-10-0189 (Spanish)

Sao Paulo region: (11) 3889-8986

Brazil

Outside Sao Paulo region: 0800-701-4815
(Brazilian Portuguese)

Brunei 801-1041 (English, Bahasa Melayu)

Toronto: 416-383-3344

Canada

Outside Toronto: 1-800-565-3344

(English, French)

Toll Free: 188-800-442-488

Chile

800-361-213
(Spanish)

86-10-58851110

China

800-990-8888

(Mandarin)

852)3071-3561

China

(Hong Kong S.A.R.)

(

(Cantonese, English, Mandarin)

China

(Macau S.A.R.)

ThinkCentre Commercial PC: 795-9892
Multimedia Home PC: 0800-336

(Cantonese, English, Mandarin)

Colombia 1-800-912-3021 (Spanish)

Costa Rica 0-800-011-1029 (Spanish)

Croatia 0800-0426

Cyprus [phone]

Czech Republic [phone]

Denmark Warranty service and support: 7010-5150 (Danish)

Dominican Republic 1-866-434-2080 (Spanish)

Ecuador 1-800-426911 (Spanish)

Egypt [phone]

El Salvador 800-6264 (Spanish)

Estonia

[phone]
[phone]

Finland Warranty service and support: [phone] (Finnish)

Warranty service and support (hardware): 0810-631-213

France

Warranty service and support (software): 0810-631-020

(French)

Germany Warrantyserviceandsupport:01805 004618 (German)

Greece [phone]

Guatemala 1800-624-0051 (Spanish)

Tegucigalpa: 232-4222

Honduras

San Pedro Sula: 552-2234
(Spanish)

Appendix A. A-2

CountryorRegion TelephoneNumber

[phone]

Hungary

[phone]
(English, Hungarian)

1800-425-2666

India

[phone]

(English)

021 5238 823

Indonesia

Local number only: 001-803-606-282
DID (Direct Inward Dialing): [phone]
(English, Bahasa Indonesia)

Ireland Warranty service and support: 01-881-1444 (English)

Israel

Givat Shmuel Service Center: [phone]
(Hebrew, English)

Italy Warranty service and support: [phone] (Italian)

Toll Free: 0120-20-5550
International: [phone]

The above numbers will be answered with a Japanese language
voice prompt. For telephone support in English, please wait for the

Japan

Japanese voice prompt to end, and an operator will answer. Please

say "English support please," and your call will be transferred to
an English-speaking operator.
PC software: 0120-558-695
Overseas calls: [phone]

(Japanese)

Korea 1588-6782 (Korean)

Latvia [phone]

Lithuania [phone]

Luxembourg [phone] (French)

Local number only: 1800-88-1889

Malaysia

DID: [phone]
(English, Bahasa Melayu)

Malta [phone]

Mexico 001-866-434-2080 (Spanish)

Middle East [phone]

Netherlands [phone] (Dutch)

New Zealand 0800-733-222 (English)

Nicaragua 001-800-220-1830 (Spanish)

Norway Warranty service and support: 8152-1550 (Norwegian)

Panama

Lenovo Customer Support Center: 001-866-434-2080 (Toll Free)
206-6047 (Spanish)

Peru 0-800-50-866 (Spanish)

Philippines 1800-1601-0033 (English, Filipino)

Poland [phone] (Polski)

Appendix A. A-3

CountryorRegion TelephoneNumber

Portugal [phone] (Portuguese)

Romania [phone]

Moscow: [phone]

Russia

Toll Free: [phone]
(Russian)

Singapore

Local number only: 800-6011-343
DID: [phone] (English)

Slovakia [phone]

Slovenia [phone] (Slovenian)

91-714-7983

Spain

0901-100-000
(Spanish)

[phone]

Sri Lanka

[phone]

(English)

Sweden Warranty service and support: 077-117-1040 (Swedish)

Switzerland

Warranty service and support: 0800-55-54-54

(German, French, Italian)

886-2-8723-9799

Taiwan

0800-000-700
(Mandarin)

Local number only: 1-800-060-066

Thailand

66 2273 4088
DID: [phone] (Thai, English)

Turkey 0212 336 03 66 , 00800 448 825 165 (Turkish)

United Kingdom Standard warranty support: 08705-500-900 (English)

United States 1-800-426-7378 (English)

Uruguay 000-411-005-6649 (Spanish)

Venezuela 0-800-100-2011 (Spanish)

For Northern Area and Hanoi City:
844 3 946 2000 or 844 3 942 6457

Vietnam

For Southern Area and Ho Chi Minh City:
848 3 829 5160 or 844 3 942 6457

(Vietnamese, English)

Appendix A. A-4

Appendix B.Notices

Lenovo may not offer the products, services, or features discussed in this document in all
countries. Consult your local Lenovo representative for information on the products and
services currently available in your area. Any reference to a Lenovo product, program,
or service is not intended to state or imply that only that Lenovo product, program, or
service may be used. Any functionally equivalent product, program, or service that does
not infringe any Lenovo intellectual property right may be used instead.

However, it is the user 's responsibility to evaluate and verify the operation of any other

product, program, or service.

Lenovo may have patents or pending patent applications covering subject matter described

in this document. The furnishing of this document does not give you any license to these

patents. You can send license inquiries, in writing, to:

Lenovo(UnitedStates),Inc.
1009ThinkPlace-BuildingOne
Morrisville,NC27560
U.S.A.
Attention:LenovoDirectorofLicensing

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow

disclaimer of express or implied warranties in certain transactions, therefore, this
statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes
are periodically made to the information herein; these changes will be incorporated in

new editions of the publication. Lenovo may make improvements and/or changes in the
product(s) and/or the program(s) described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other

life support applications where malfunction may result in injury or death to persons.

The information contained in this document does not affect or change Lenovo product

specications or warranties. Nothing in this document shall operate as an express or

implied license or indemnity under the intellectual property rights of Lenovo or third

parties. All information contained in this document was obtained in specic environments

and is presented as an illustration. The result obtained in other operating environments
may vary.

Lenovo may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo Web sites are provided for convenience

only and do not in any manner serve as an endorsement of those Web sites. The materials
at those Web sites are not part of the materials for this Lenovo product, and use of those
Web sites is at your own risk.

Any performance data contained herein was determined in a controlled environment.

Therefore, the result obtained in other operating environments may vary signicantly.
Some measurements may have been made on development-level systems and there is

no guarantee that these measurements will be the same on generally available systems.
Furthermore, some measurements may have been estimated through extrapolation. Actual

results may vary. Users of this document should verify the applicable data for their specic

environment.

Appendix B. B-1

Recycling information

Lenovo encourages owners of information technology (IT) equipment to responsibly
recycle their equipment when it is no longer needed. Lenovo offers a variety of programs
and services to assist equipment owners in recycling their IT products. For information on

recycling Lenovo products, go to:
http://www.lenovo.com/lenovo/environment/recycling

Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor
that is the property of the company, you must do so in accordance with the Law for

Promotion of Effective Utilization of Resources. Computers and monitors are categorized

as industrial waste and should be properly disposed of by an industrial waste disposal

contractor certied by a local government. In accordance with the Law for Promotion of
Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and
Recycling Services, for the collecting, reuse, and recycling of disused computers and
monitors. For details, visit the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/
pcrecycle/. Pursuant to the Law for Promotion of Effective Utilization of Resources,
the collecting and recycling of home-used computers and monitors by the manufacturer
was begun on October 1, 2003. This service is provided free of charge for home-used

computers sold after October 1, 2003. For details, visit the Lenovo Web site at www.ibm.

com/jp/pc/service/recycle/personal/.

Disposing of Lenovo computer components

Some Lenovo computer products sold in Japan may have components that contain heavy

metals or other environmental sensitive substances. To properly dispose of disused
components, such as a printed circuit board or drive, use the methods described above
for collecting and recycling a disused computer or monitor.

Trademarks

The following terms are trademarks of Lenovo in the United States, other countries, or
both:

Lenovo
The Lenovo logo
ThinkCenter
ThinkPad

ThinkVision
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of
companies.
Other company, product, or service names may be trademarks or service marks of others.

Appendix B. B-2