Lenovo ayden User Manual

Ayden™

3.5” Digital Video Baby Monitor / Moniteur vidéo bébé numérique 3,5po / Video Monitor Digital para Bebé 3.5”

User Manual, pg. 2 / Manuel de l’utilisateur, p. 20 / Manual del usuario, pg. 38

Strangulation Hazard!

Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft [0.9 m] away).

Risque de Strangulation !

Enfants ont étranglé dans les cordons. Gardez ce cordon d'alimentation hors de portée des enfants (plus de 3 pieds [0,9 m] de distance).

Peligro de Estrangulación !

Los niños tienen ESTRANGULADO en cuerdas. Mantener este cordón fuera del alcance de niños (más de 3 pies [0,9 metros] de distancia).

WARNING

•

MISE EN GARDE

•

ADVERTENCIA

SAFETY WARNINGS

CAUTION: Keep small parts away

from children.

Strangulation Hazard: Children can become

entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors with power cords should never be hung on or near the crib.

This product is not a toy and should be kept

out of children’s reach.

This product contains small parts. Exercise

care when unpacking and assembling the product.

Read and Keep Instructions: All the safety and

operating instructions should be read before the baby monitor is operated.

This product cannot replace responsible adult

supervision.

Use only with provided power supply.

The socket-outlet shall be installed near the

equipment and shall be easily accessible.

RISK OF EXPLOSION IF BATTERY IS

REPLACED BY AN INCORRECT TYPE!

Dispose of used batteries according to the

instructions.

Use only batteries/power supplies listed in the

user manual.

Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects ﬁ lled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water. Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use. Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air ﬂ ow. Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, ﬁ replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power Source: This unit should only be used with the power adapters included in this package (rated 6V ~ 800mA) Damage Requiring Service: This unit should be serviced by qualiﬁ ed personnel only when:

a. Objects have fallen or liquid has been spilled into the product b. The units have been exposed to rain c. The units do not appear to operate normally or exhibits a distinct change in performance d. The units have been dropped or the enclosure damaged

IC STATEMENT / DÉCLARATION IC / CAN ICES-3 (B)/NMB-3(B): Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet équipement ne doit pas causer d’interférences, et (2) Cet équipement doit accepter toute interférence, y compris les interférences capables de causer un mauvais fonctionnement de l’appareil

Changes or modiﬁ cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that

may cause undesired operation.

FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inerference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet di erent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This marking indicates that this product should not be disposed with other household wastes throughout North America. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

2 3

DISCLAIMERS

Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors/cameras with power cords should never be hung on or near the crib. This product is not a toy.

This product contains small parts. Exercise care when unpacking and assembling the product.

Optimum range is 200 feet when signal is passing through walls or ﬂ oors. Microwave ovens (when in use) may cause signal disruption at close range. Buildings with metal frames may also cause signal disruption. Maximum transmission range is 750 feet.

Battery life of 48 hours based on 10 audio activations while in power save (PEEP) mode. Battery lasts an average of 8 hours with continuous audio/video usage.

Night vision range up to 15ft under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application.

This product does not replace responsible adult supervision. Check on your child at regular intervals and make sure

We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods:

Web: www.mylevana.com Support: www.mylevana.com/support

LEVANA Canada LEVANA USA 4080 Montrose Road 60 Industrial Parkway #Z64 Niagara Falls, ON Cheektowaga NY Canada L2H 1J9 USA 14227

Warranty Terms

1. LEVANA

products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option.

2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual.

3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty.

4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not speciﬁcally mentioned in this warranty.

5. This warranty does not cover the shipping cost, insurance or any other incidental charges.

6. You MUST contact LEVANA at www.mylevana.com/support before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #).

7. This warranty is valid only in Canada and the continental U.S.

8. This warranty cannot be re-issued.

Please visit our website at www.mylevana.com for information about your product’s warranty

WARRANTY

TABLE OF CONTENTS

Safety Warnings ................................................................................................................................ 2

FCC Statement .................................................................................................................................. 3

Disclaimers ......................................................................................................................................... 3

Warranty ............................................................................................................................................. 4

What’s Included ................................................................................................................................ 5

Buttons and Connections ............................................................................................................... 6

Setup ................................................................................................................................................... 7

Battery installation - monitor ............................................................................................. 7

Battery installation - camera (optional) ............................................................................ 8

Connecting the Power Adapters ....................................................................................... 8

Charging the Monitor .......................................................................................................... 8

Get the Most Out of Your Rechargeable Battery ............................................................ 9

Screen Icons .......................................................................................................................... 9

Pairing the Monitor and the Camera(s) .......................................................................... 10

Mounting the Camera on a Tabletop Safely ...................................................................11

Placement of the Monitor ..................................................................................................11

Mounting the Camera on a Wall Safely .......................................................................... 12

Night Vision .......................................................................................................................... 12

Operation ......................................................................................................................................... 13

Using the Zoom / Pan & Tilt functions ........................................................................... 13

Adjusting the volume ......................................................................................................... 13

Using the Talk to Baby™ Two-Way Intercom ................................................................ 14

Turning the Nightlight On/OFF ........................................................................................14

Setting a Lullaby .................................................................................................................. 14

Using the PEEP Mode function ........................................................................................ 15

Changing the Camera View .............................................................................................. 15

Setting the Brightness ........................................................................................................ 16

Sound Sensitivity Settings ................................................................................................. 16

Temperature Settings ..........................................................................................................17

Troubleshooting ...............................................................................................................................17

Speciﬁcations .................................................................................................................................. 18

WHAT’S INCLUDED

• Baby Video Monitor

• Night Vision Camera

• 2 Power Adapters

• Rechargeable Battery

• Quick Start Guide

• 1 year warranty

• Lifetime Customer Support

6 7

1 Lock / Unlock Button

Disables ALL function b uttons in the LOCK position

2 LCD Screen

3 Talk To Baby™

Press and hold to talk, rele ase to listen

4 Power & Screen ON/OFF

Press and hold to turn monitor ON/OFF; Press once to turn screen ON/OFF

5 Nightlight

6 Menu & Exit-Close

7 Microphone

8 Navigation Buttons

9 Select

10 Volume -

Down / Up

11 Antenna

12 Night Vision LEDs

13 Camera Lens

14 Microphone

15 Nightlight

16 Night Vision Light Sensor

17 On/OFF Button

18 Power LED

BUTTONS AND CONNECTIONS

3 4

7 8

BUTTONS AND CONNECTIONS

1 Battery Compartment

2 Table Stand

3 Antenna

4 Speaker

5 Speaker

6 Pairing Button

7 Antenna

8 Power Input

1 32 4

SETUP

Battery Installation - Monitor

1. Slide Battery Compartment Cover down

to remove.

2. Insert the included rechargeable battery.

Ensure the battery connectors on the battery line up with the connectors inside the battery compartment.

3. Slide the Battery Cover back into place.

4. Remove battery during periods of non-use.

8 9

SETUP

Battery Installation - Camera (optional)

The camera unit can be powered using 4 AAA batteries instead of the included adapter.

1. Gently remove the Battery Compartment Cover on the bottom of the camera base, using a small phillips (cross) head screwdriver.

2. Insert 4 AAA batteries in the compartment (not included), paying close attention to the labelled polarity markings.

3. Replace the battery compartment cover using the small screwdriver.

4. The Power LED will ﬂ ash when the battery charge is low.

Connecting the Power Adapters

1. Connect the Power Adapter marked Monitor

to the Power Input on the

side of the Monitor.

2. Press and hold the Power

button on the side of the monitor to turn the monitor ON.

Charging the Monitor

There are two ways to determine the battery power status:

1. The LED Ring on the front of the monitor

2. The icon in the top right corner of the main screen

EMPTY FULL

SOLID BLUE = BATTERY FULLY CHARGED QUICK FLASHING BLUE = BATTERY LOW FLASHING PINK = PAIRING UNSUCCESSFUL

Battery

Compartment

cover

SETUP

Get the Most Out of Your Rechargeable Battery

Screen Icons

1. Connect the Power Adapter marked Camera

to the Power Input on the back

of the Camera.

2. Slide the ON/OFF switch on the side of the camera to the ON position. Power LED will be a solid red.

Fully charge your battery before

ﬁ r s t u s e

Charge battery before battery is

fully drained.

Avoid extreme heat or cold as this

will a ect the battery life.

Turn LCD screen OFF. Press

POWER button on side of monitor ONCE.

PEEP Mode: After 1 minute of

inactivity, monitor enters standby/ sleep mode (when activated)

Adjustable Brightness: Decrease

screen brightness

Lullabies

Peep Mode

Camera

Brightness

Sound Sensitivity

Pairing

Temperature

10 11

Pairing the Monitor and the Camera(s)

The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually.

To pair additional cameras, repeat steps below and be sure to assign a dierent camera number to each additional camera.

SETUP

Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side.

3 ft

away

Mounting the Camera on a Tabletop Safely

1. Place the Camera on a tabletop no less than 3 feet away from your baby’s crib.

2. Feed the power cord down the back of the table or use wall clips (not included) to secure the cord away so the baby cannot reach it.

3. Plug in the power cord, check the monitor to ensure that you can see and hear your child.

Note: Baby monitors with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.

SETUP

Placement of the Monitor You can place the monitor on a tabletop by using

the retractable table stand on the back of the monitor. When not in use, simply tuck the table stand away into the back of the monitor until you hear a “click”.

1. Turn camera on 2. Enter Menu

3. Navigate to Pairing

4. Select Camera Number 5. Pair Camera

12 13

SETUP

Mounting the Camera on a Wall Safely Before drilling the holes, it is important to check the reception and camera positioning in

the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib.

1. Pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit.

2. Insert wall anchors (not included) into each hole and tap gently with a hammer until the anchor is ﬂ ush with the wall.

3. Insert a screw (not included) into each wall anchor and tighten until the screws only stick out about a 1/2 inch.

4. Plug the power cord into the power input of the camera.

5. Locate the wall mounting holes on the bottom of the camera base.

6. Slide the holes over the screws sticking out of the wall.

7. Conﬁ rm that the camera is secure, if it is loose you may have to tighten the screws more.

8. Use wall clips (not included) to secure the power cord away from the crib or the baby’s reach.

9. Connect the other end of the adapter into an available wall outlet.

Night Vision The camera is equipped with Invisible IR (infrared) LEDs

which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 15 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the front of the camera detects that the light levels are too low.

INVISIBLE

LEDs

LIGHT

SENSOR

OPERATION

Using the Zoom / Pan & Tilt functions

While in Zoom, the screen allows you to Pan/Tilt the image up, down, left and right on the screen (not the camera angle). Press Select + to exit the Zoom / Pan & Tilt function.

Adjusting the volume

Note: Placing the monitor and camera too close together will create feedback. DECREASE or MUTE the volume and move the camera away from the monitor.

Mute High

14 15

OPERATION

Using the Talk to Baby™ Two-Way Intercom With the simple press of a button you can talk to

your child at any time without entering the nursery.

1. To talk, press and hold the

(Talk) button on

the front of the monitor and release to listen.

2. To talk when using multiple cameras, select the camera view (see "Changing the Camera View") and press the

(Talk) button, release

to listen.

Turning the Nightlight On/OFF

When using multiple cameras, select the desired camera (see “Changing the Camera View”) and press the Nightlight button

to turn the Nigthlight ON/OFF.

Setting a Lullaby

Choose from three dierent lullabies to soothe your baby to sleep.

1. Press the Menu / Exit button

and use the Navigational arrow keys to navigate the dierent lullabies.

2. Press Select + to conﬁrm your choice.

3. Press Menu / Exit button to save your selection and return to main menu.

OPERATION

Using the PEEP Mode function Voice activated technology helps conserve battery life by putting the system into

hibernation mode when sounds are not detected for 1 minute. If your child starts to cry or make noise, the unit will automatically detect it. The preset noise level is set to a level comparable to a casual conversation. To increase sound sensitivity to noise level in the room, see "Sound Sensitivity Settings".

1. Press the Menu / Exit button

and use the Navigational arrow keys to navigate the Power Save options.

2. Press Select + to conﬁrm your choice.

3. Press Menu / Exit button to save your selection and return to main menu.

Changing the Camera View

1. Press the Menu / Exit button

and use the Navigational arrow keys to navigate the Camera View options.

2. Press Select + to conﬁrm your choice.

3. Press Menu / Exit button to save your selection and return to main menu.

4. Repeat the steps above to return to

any other camera view.

• Selecting Scan View

cycles through cameras 1 to 4. Each camera view will appear for 6 seconds per camera. (If more than one camera is paired).

• To access live view manually when screen if o, press the Power button ONCE.

• PEEP Mode extends the battery life up to 48 hours.

16 17

OPERATION

Setting the Brightness Brightness Mode sets the brightness of the

the screen. A dimmer screen will extend the battery life.

1. Press the Menu / Exit button

and use the Navigational arrow keys to navigate the dierent Brightness Settings.

2. Press Select + to conﬁrm your choice.

3. Press Menu / Exit button to save your selection and return to main menu.

Sound Sensitivity Settings Sensitivity Mode allows you to adjust the sensitivity of the sound the camera picks up.

The LED Ring on the front of the monitor also indicates how loud the sound in the room is with colors.

1. Press the Menu / Exit button and use

the Navigational arrow keys to navigate the dierent Sound Sensitivity Settings.

2. Press Select + to conﬁrm your choice.

3. Press Menu / Exit button to save your

selection and return to main menu.

whisper, murmer

Disconnected

Chatter

Yelling

Temperature Settings Studies indicate your baby’s room should be between 68-71° F (20- 21° C). This camera

includes a temperature monitor for your baby’s room. The temperature of the nursery can be shown with your video monitor’s on-screen display in your choice of Fahrenheit or Celsius so you will always know that your baby is comfortable.

1. Press the Menu / Exit button

and use the Navigational arrow keys to navigate the dierent Temperature Settings.

2. Press Select + to conﬁrm your choice.

3. Press Menu / Exit button to save your selection and return to main menu.

OPERATION

TROUBLESHOOTING

ISSUE POSSIBLE SOLUTION

Equipment does not function

• Conﬁrm that the Camera and Monitor are ON

• The battery may be depleted; charge battery

• The power adapter(s) may not be properly connected

No reception

• Camera and monitor may not be properly paired; move the Camera and Monitor closer together

Reception Interference (static)

• The Camera and Monitor may be too far apart

• The battery power may be too low

• Other electronic devices may be interfering with the signal

• The Camera and Monitor may be placed too close to many metal objects

Noise (static, beeping) • Battery power may be too low

The rechargeable battery will not charge

• The power adapter may not be connected

• Battery pack may not be properly connected inside the battery compartment

+ 19 hidden pages

Lenovo ayden User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual