LENOVO A2010-a Exploded View

so on.Anti-static tray need to be used now in vitro after removal lon-izing blow dry, transparent film to ensure is that the new

film (may not be reused)

bags, static electricity is recommended for the blister tray and a plastic disc placed cleanliness higher isolation film form,

Under the specific packing layer: anti-static tray - transparent film on the transparent film - product - - anti-static tray, and

back-end links to product hidden trouble

、Focuses on the purity of the packing and warehousing, transportation process for shell pollution risk, avoid dirt from the

attention to request mold factory exhaust direction of foam and burr in the same direction of the steel, avoid scratching around

adding appropriate component

hair silk or points behind the front shell of dust and LCD

Foam cavity side, if there is still a risk of dustfall, suggested after back glue, foam joint strength of air gun small blow try

、Package are prohibited flaky materials, such as pearl cotton, or monomer cleanness not enough air bubble bags or plastic

NOTES:

、Assembly with dust-free workshop assembly, process material transfer must ensure cleanliness, including the turnover box

、Assembly before the shell must ensure that, by means of air rifle clean monomer dust-free dot, hair silk, or white dots

、Pay attention to avoid hair silk and residue in the process of assembly, pay attention to use finger sets of operation, pay