ThinkCentre M625q User Guide and Hardware
Maintenance Manual
Enery Star Machine Types: 10TF, 10TG, 10TH, 10TJ, 10TK, 10TL,
10UY, 10V0, 10V1, and 10V2
Note: Before using this information and the product it supports, be sure to read and understand the
Important Product Information Guide and Appendix A “Notices” on page 67.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.
Contents
Chapter 1. Overview. . . . . . . . . . . 1
Front view . . . . . . . . . . . . . . . . . . 1
Rear view . . . . . . . . . . . . . . . . . . 2
System board . . . . . . . . . . . . . . . . 4
Machine type and model label . . . . . . . . . . 6
Used to turn on your computer. When you cannot shut down the computer from the operating system, press
and hold the power button for four or more seconds to turn off the computer.
3 Storage drive status indicator
This indicator is on when the storage drive is in use.
4 Microphone connector
Used to connect a microphone to your computer. You can use the microphone to record sounds or interact
with the computer using speech-recognition software.
5 Headset connector
Used to connect a headset or headphones to your computer.
6 USB 3.0 connector
Used to connect a USB-compatible device, such as a USB keyboard, mouse, scanner, printer, or personal
digital assistant (PDA). For optimal data transfer, connect a USB 3.0 device to a USB 3.0 connector instead
of a USB 2.0 connector.
7 Always On USB 3.0 connector
Used to connect a device that requires a USB 2.0 or USB 3.0 connection, such as a keyboard, a mouse, a
scanner, a printer, or a personal digital assistant (PDA). With the power adapter connected, you can charge
the automatically detected device even when the computer is in hibernation mode or turned off.
8 Illuminated red dot
This indicator is on when the computer is on.
Rear view
Note: Your computer model might look slightly different from the illustration.
2
ThinkCentre M625q User Guide and Hardware Maintenance Manual
Figure 2. Rear view
1 Optional connector 12 Optional connector 2
3 Security-lock slot
5 Ethernet connector
7 USB 2.0 connector
9 USB 3.0 connector
11 Power adapter connector
1 Optional connector 1
4 Wi-Fi antenna slot
6 USB 2.0 connectors
8 DisplayPort
10 DisplayPort connector
Depending on the computer model, the connector might vary.
2 Optional connector 2
Depending on the computer model, the connector might vary.
3 Security-lock slot
Used to secure a Kensington-style cable lock.
®
connector
Chapter 1. Overview3
4 Wi-Fi antenna slot
Used to install the rear Wi-Fi antenna cable connector that is available only on some models. The rear Wi-Fi
antenna is installed on the rear Wi-Fi antenna cable connector.
5 Ethernet connector
Used to connect an Ethernet cable for network access.
6 USB 2.0 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 2.0 device to a USB
2.0 connector.
7 USB 2.0 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 2.0 device to a USB
2.0 connector.
8 DisplayPort connector
Used to send audio and video signals from the computer to another audio or video device, such as a highperformance monitor.
9 USB 3.0 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.0 device to a USB
3.0 connector instead of a USB 2.0 connector.
10 DisplayPort connector
Used to send audio and video signals from the computer to another audio or video device, such as a highperformance monitor.
11 Power adapter connector
Used to connect the power adapter to your computer for power supply.
System board
Note: See “Front view” on page 1 and “Rear view” on page 2 for additional component descriptions.
4
ThinkCentre M625q User Guide and Hardware Maintenance Manual
The machine type and model label identifies the computer. When you contact Lenovo for help, the machine
type and model information helps support technicians to identify the computer and provide faster service.
The machine type and model label is attached on the top of the computer as shown.
Figure 4. Machine type and model label
6ThinkCentre M625q User Guide and Hardware Maintenance Manual
Chapter 2.Specifications
Power supply
• 65-watt automatic voltage-sensing power supply
Storage drives
• 2.5-inch storage drive
• M.2 storage drive
Video features
• The integrated graphics card supports the following:
– DisplayPort connector
Audio features
• The integrated audio card supports the following:
8ThinkCentre M625q User Guide and Hardware Maintenance Manual
Chapter 3.Computer locks
This chapter provides instructions on how to lock your computer with the locking devices to keep your
computer safe.
Attaching a Kensington-style cable lock
You can use a Kensington-style cable lock to secure your computer to a desk, table, or other nonpermanent
fixture. The cable lock connects to the security-lock slot at the rear of your computer. Depending on the type
selected, the cable lock can be operated with a key or combination. The cable lock also locks the buttons
used to open the computer cover. This is the same type of lock used with many notebook computers. You
can order such a cable lock directly from Lenovo by searching for Kensington at:
10ThinkCentre M625q User Guide and Hardware Maintenance Manual
Chapter 4.Replacing hardware
This chapter provides instructions on how to replace hardware for your computer.
Before replacing hardware
Attention: Do not open your computer or attempt any repairs before reading this section and the Important
Product Information Guide.
Notes before replacing hardware
• Use computer components provided only by Lenovo.
• When installing or replacing an option, use the appropriate instructions explained in this manual along with
the instructions that come with the option.
• In most areas of the world, Lenovo requires the return of defective CRUs. Information about this will come
with the CRU or will come a few days after the CRU arrives.
Handling static-sensitive devices
Do not open the static-protective package containing the new part until the defective part has been removed
and you are ready to install the new part. Static electricity, although harmless to you, can seriously damage
computer components and options.
When you handle options and other computer components, take these precautions to avoid static-electricity
damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle options and other computer components carefully. Handle PCI/PCIe cards, memory
modules, system boards, and microprocessors by the edges. Never touch any exposed circuitry.
• Prevent others from touching the options and other computer components.
• Touch the static-protective package containing the part to a metal expansion-slot cover or other
unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the
package and your body before you install or replace a new part.
• When possible, remove the new part from the static-protective package, and install it directly in the
computer without setting the part down. When this is not possible, place the static-protective package on
a smooth, level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.
Knowing FRUs (including CRUs)
• Field Replaceable Units (FRUs) are computer parts that a trained technician can upgrade or replace. FRUs
include all CRUs. For detailed FRU information, such as the FRU part numbers and supported computer
models, go to:
http://www.lenovo.com/serviceparts-lookup
• Customer Replaceable Units (CRUs) are computer parts that a user can upgrade or replace.
– Self-service CRUs: You can install self-service CRUs easily. These CRUs might be stand-alone,
latched, or secured by up to two screws. Examples of self-service CRUs include the keyboard, mouse,
any USB device. You are responsible for replacing all self-service CRUs.
– Optional-service CRUs: Handling optional-service CRUs requires some technical skills and simple tools
(such as a screwdriver). These CRUs are isolated parts within the computer. They are usually
concealed by an access panel that is secured by more than two screws. You must remove the screws
and panel to access the specific CRU. Optional-service CRUs can be removed and installed by users
or, during the warranty period, by a Lenovo service technician.
Before replacing FRUs
Before replacing any FRU, read the following:
• Only certified and trained personnel can service the computer.
• Before replacing an FRU, read the entire section about replacing the part.
• Be extremely careful during writing operations such as copying, saving, or formatting.
The sequence of the drives in the computer that you are servicing might have been altered. If you select
an incorrect drive, data or programs might be overwritten.
• Replace an FRU only with another FRU of the correct model.
When you replace an FRU, ensure that the model of the machine and the FRU part number are correct.
• An FRU should not be replaced because of a single, unreproducible failure.
Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as
cosmic radiation, electrostatic discharge, or software errors. Consider replacing an FRU only when a
problem recurs. If you suspect that an FRU is defective, clear the error log and run the test again. If the
error does not recur, do not replace the FRU.
• Only replace a defective FRU.
12
ThinkCentre M625q User Guide and Hardware Maintenance Manual
Locating FRUs (including CRUs)
Locating FRUs (including CRUs) for 10TF, 10TG, 10TH, 10TJ, and 10TK models
Figure 6. Locating FRUs (including CRUs)
Notes:
• Some of the components are optional.
• To replace a component that is not in the list below, contact a Lenovo service technician. For a list of
Lenovo Support phone numbers, go to:
Note: The wireless keyboard is available only on some models.
Replacing the keyboard
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Disconnect the old keyboard cable from the computer.
3. Connect a new keyboard to the appropriate connector on the computer.
Figure 8. Replacing the keyboard
16ThinkCentre M625q User Guide and Hardware Maintenance Manual
Replacing the wireless keyboard
1. Remove your old wireless keyboard.
2. Take out the new wireless keyboard from the package.
3. Open the battery compartment cover, and install two AAA batteries according to the polarity indicators.
Figure 9. Replacing the wireless keyboard
4. Remove the USB dongle from the keyboard compartment or from the wireless mouse compartment and
connect it to an available USB connector on the computer.
5. Close the compartment cover. The keyboard is ready for use.
Replacing the mouse or wireless mouse
Note: The wireless mouse is available only on some models.
Replacing the mouse
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Disconnect the old mouse cable from the computer.
3. Connect a new mouse to the appropriate connector on the computer.
Figure 10. Replacing the mouse
Chapter 4. Replacing hardware17
Replacing the wireless mouse
1. Disconnect the USB dongle from your computer. Then, remove your old wireless mouse.
2. Remove the new wireless mouse from the package.
3. Open the battery compartment cover, and install two AAA batteries according to the polarity indicators.
a. Open the battery compartment.
Figure 11. Opening the battery compartment
b. Take out the USB dongle.
18
ThinkCentre M625q User Guide and Hardware Maintenance Manual
Figure 12. Taking out the USB dongle
c. Connect the USB dongle to a USB connector.
Figure 13. Connecting the USB dongle to a USB connector
d. Install the mouse batteries.
Chapter 4. Replacing hardware19
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.