Lennox Hearth view door User Manual
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
775,169M
REV. B 06/2006
INSTALLATION INSTRUCTIONS FOR OPTIONAL STYLE VIEW DOOR KITS
FOR USE WITH GAS FIREPLACES
ARCH DESIGN KITS
Cat. No. Model Description Model Series
H0858 AD35C 35” Arch Doors, Charcoal
H0859 AD35TI 35” Arch Doors, Textured Iron
H0860 AD35SP 35” Arch Doors, Satin Pewter
H0861 AD35AB 35” Arch Doors, Antique Brass
H0862 AD40C 40” Arch Doors, Charcoal SDDV-40, EDV4035,
H0863 AD40TI 40” Arch Doors, Textured Iron
H0864 AD40SP 40” Arch Doors, Satin Pewter
H0865 AD40AB 40” Arch Doors, Antique Brass
H0866 AD45C 45” Arch Doors, Charcoal
H0867 AD45TI 45” Arch Doors, Textured Iron
H0868 AD45SP 45” Arch Doors, Satin Pewter
H0869 AD45AB 45” Arch Doors, Antique Brass
H0870 AD35EC 35” Elite Arch Doors, Charcoal
H0871 AD35ETI 35” Elite Arch Doors, Textured Iron
H0872 AD35ESP 35” Elite Arch Doors, Satin Pewter
H0873 AD35EAB 35” Elite Arch Doors, Antique Brass
ARCH PANE DESIGN KITS
H0930 APD35C 35” Arch Pane Doors, Charcoal
H0931 APD35TI 35” Arch Pane Doors, Textured Iron
H0932 APD35SP 35” Arch Pane Doors, Satin Pewter
H0933 APD35AB 35” Arch Pane Doors, Antique Brass
H0934 APD40C 40” Arch Pane Doors, Charcoal SDDV-40, EDV4035,
H0935 APD40TI 40” Arch Pane Doors, Textured Iron
H0936 APD40SP 40” Arch Pane Doors, Satin Pewter
H0937 APD40AB 40” Arch Pane Doors, Antique Brass
H0938 APD45C 45” Arch Pane Doors, Charcoal
H0939 APD45TI 45” Arch Pane Doors, Textured Iron
H0940 APD45SP 45” Arch Pane Doors, Satin Pewter
H0941 APD45AB 45” Arch Pane Doors, Antique Brass
H0942 APD35EC 35” Elite Arch Pane Doors, Charcoal
H0943 APD35ETI 35” Elite Arch Pane Doors, Textured Iron
H0944 APD35ESP 35” Elite Arch Pane Doors, Satin Pewter
H0945 APD35EAB 35” Elite Arch Pane Doors, Antique Brass
SQUARE DESIGN KITS
H0946 SD35C 35” Sq. Doors, Charcoal
H0947 SD35TI 35” Sq. Doors, Textured Iron
H0948 SD35SP 35” Sq. Doors, Satin Pewter
H0949 SD35AB 35” Sq. Doors, Antique Brass
* Note: EDVST models manuafactured August 2004 or earlier
will also require a magnet mounting kit, Cat. No. H2110
MPD3530
MPD35ST
MPB35ST
LMDV-3530
ED4035-2,
*EDVST, EDST-2,
EDVCR/L, EDCR/L-2,
EDVPF, EDPF-2,
MPD4035, LMDV-4035
EDV4540, ED4540-2,
MPD4540
SDDV-35, EDV3530,
ED3530
MPD3530
MPD35ST
MPB35ST
LMDV-3530
ED4035-2,
* EDVST, EDST-2,
EDVCR/L, EDCR/L-2,
EDVPF, EDPF-2,
MPD4035, LMDV-4035
EDV4540, ED4540-2,
MPD4540
SDDV-35, EDV3530,
ED3530
MPD3530
MPD35ST
MPB35ST
LMDV-3530
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Page 1 of 2
STYLE VIEW DOOR KITS - CHARCOAL,
TEXTURED IRON, SATIN PEWTER & ANTIQUE BRASS
SQUARE DESIGN KITS (continued)
Cat. No. Model Description Model Series
H0950 SD40C 40” Sq. Doors, Charcoal SDDV-40, EDV4035,
H0951 SD40TI 40” Sq. Doors, Textured Iron
H0952 SD40SP 40” Sq. Doors, Satin Pewter
H0953 SD40AB 40” Sq. Doors, Antique Brass
H0954 SD45C 45” Sq. Doors, Charcoal
H0955 SD45TI 45” Sq. Doors, Textured Iron
H0956 SD45SP 45” Sq. Doors, Satin Pewter
H0957 SD45AB 45” Sq. Doors, Antique Brass
H0958 SD35EC 35” Elite Sq. Doors, Charcoal
H0959 SD35ETI 35” Elite Sq. Doors, Textured Iron
H0960 SD35ESP 35” Elite Sq. Doors, Satin Pewter
H0961 SD35EAB 35” Elite Sq. Doors, Antique Brass
ED4035-2,
*EDVST, EDST-2,
EDVCR/L, EDCR/L-2,
EDVPF, EDPF-2,
MPD-4035, LMDV-4035
EDV4540, ED4540-2,
MPD4540
SDDV-35, EDV3530,
ED3530
SQUARE PANE DESIGN KITS
H0962 SPD35C 35” Sq. Pane Doors, Charcoal
H0963 SPD35TI 35” Sq. Pane Doors, Textured Iron
H0964 SPD35SP 35” Sq. Pane Doors, Satin Pewter
H0965 SPD35AB 35” Sq. Pane Doors, Antique Brass
H0966 SPD40C 40” Sq. Pane Doors, Charcoal SDDV-40, EDV4035,
H0967 SPD40TI 40” Sq. Pane Doors, Textured Iron
H0968 SPD40SP 40” Sq. Pane Doors, Satin Pewter
H0969 SPD40AB 40” Sq. Pane Doors, Antique Brass
H0970 SPD45C 45” Sq. Pane Doors, Charcoal
H0971 SPD45TI 45” Sq. Pane Doors, Textured Iron
H0972 SPD45SP 45” Sq. Pane Doors, Satin Pewter
H0973 SPD45AB 45” Sq. Pane Doors, Antique Brass
H0974 SPD35EC 35” Elite Sq. Pane Doors, Charcoal
H0975 SPD35ETI 35” Elite Sq. Pane Doors, Text. Iron
H0976 SPD35ESP 35” Elite Sq. Pane Doors, Satin Pewt.
H0977 SPD35EAB 35” Elite Sq. Pane Doors, Ant. Brass
MPD3530
MPD35ST
MPB35ST
LMDV-3530
ED4035-2,
*EDVST, EDST-2,
EDVCR/L, EDCR/L-2,
EDVPF, EDPF-2,
MPD-4035, LMDV-4035
EDV4540, ED4540-2,
MPD4540
SDDV-35, EDV3530,
ED3530
KIT CONTENTS: TOOLS REQUIRED:
1 ea. Door, Left
None
1 ea. Door, Right
1 ea. Doorframe Assembly
1 ea. Instruction Sheet
Square Pane Design
Arch Design
Arch Pane Design
Square Design
CAUTION
INSTALL ONLY WHEN THE FIREPLACE IS OFF AND COLD!
Doorframe
Slot
INSTALLATION INSTRUCTIONS:
1. Remove top louver or radiant panel/hood assembly (if possible), by pulling
the assembly up and out (see Figure1). In instances where the radiant
panel is used but it is framed in with tile or other approved material, the
hood must still be removed by fi rmly pulling it forward until it releases
from the receiving brackets. If installing Style View doors on Elite units,
remove top and bottom bustle by lifting them up and out. Merit Plus
models are not equipped with bustles.
Louvers
Figure 1
Bustles
Slot
Figure 2
b. Position the top of the doorframe above the top of the glass door
assembly (centered and approximately 1” above glass door assembly). Note: The bottom of the doorframe should be held slightly
away as shown in Figure 2. Swing the bottom of the doorframe
inward aligning the sides of the doorframe between the glass door
and fi replace chassis and tabs on doorframe aligning into slots on
fi replace. Swing the bottom of the doorframe in, then push down
to ensure engagement.
4. Remove the Style View doors from packaging. Install them by aligning
hinge pins on the doors with the hinge holes on the doorframe and slide
down (see Figure 3). Ensure the hinge pins are fully seated onto the
shoulders of the hinge holes.
2. Ensure the glass door assembly on the fi replace is properly aligned as
follows:
a. Open the bottom louver (hinges down).
b. (For Elite-2 and EDV Models only)
i. Remove the bottom compartment door by sliding the hinge pin,
located at the door’s left side, to the right un-til it disengages
from the left corner post hole. Pull the door diagonally to the
left, away from the fi replace.
ii. Remove the modesty panel as follows: Lift the modesty panel
by the tab on the panel’s right end, pull the right end of the
panel away from cabinet and then pull the panel diagonally out
of the corner post slots on the left side of the unit. Remove the
modesty panel carefully, so that none of the wires become loose
or discon-nected.
c. Open both latches at the bottom of the glass door assembly (refer
to Homeowners Manual).
d. Adjust glass door so that it is evenly spaced and aligned to the
fi replace chassis on both sides.
e. Fasten the 2 latches (ensure that both latches are engaged with the
door’s vee-fl ange and fully closed).
3. Remove Style View doorframe from packaging. Install the door-frame
as follows:
a. Locate slots on each side of fi replace (see Figure 2).
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design,
materials, specifi cations, prices and the discontinuance of colors, styles and products. Consult your
local distributor for fi replace code information.
Hinge Pins
Figure 3
5. Close both doors.
6. Ensure that both latches below the door are engaged with the door’s
vee-fl ange and fully closed before operating the fi replace.
7. For Elite-2 and EDV models, reinstall modesty panel, ensuring all wires
are securely connected.
8. Re-install the top louver assembly, hood or bustles, if applicable.
9. Close the bottom louver assembly.
Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2003
P/N 775,169M REV. B 06/2006
Page 2 of 2
1110 West Taft Avenue • Orange, CA 92865
Loading...