ELITE™ SERIES gAS FIREPLACE INSERTS
Transform a drafty metal or masonry fireplace into
an efficient, clean-burning source of heat that delivers
a gorgeous on-demand fire.
EDVI30 shown with optional bay window, brushed stainless steel louver kit and medium surround kit.
■ Finally, there’s an easy and attractive solution to the drafty metal or masonry fireplace. Elite™ Series gas inserts from
Lennox fit perfectly into almost any traditional fireplace opening to instantly transform it into a warm and mesmerizing
centerpiece. Each model features finely detailed split oak-style log sets, glowing ember beds and a fully adjustable
flame that dances with vibrancy and realism. To keep you cozy and warm, Elite gas inserts can heat up to a 2,000 sq. ft.
room by combining up to 35,000 BTU/hr, 89% efficiency, and a variable speed, heat-activated blower that can be
controlled from the unit, a thermostat or an optional remote control. And to help you customize the look of the insert to fit
your room décor, there are attractive style and accessory options available. ■
2
Style and accessory options
Elite™ Series gas inserts from Lennox can be customized in a variety of styles. Choose a louverless look, a bay
window front or a traditional louvered design to meet your specific installation requirement and achieve
the appearance you desire. Each style also offers a variety of optional accessories so you can get the look
that best reflects your taste.
LOUVERLESS
Shown with Style View™ doors
REQUIRED ACCESSORIES
Style View™ Doors
and flat surround.
BAY WINDOW
Shown with bay front door kit, louver kit,
beveled surround and hearth riser.
REQUIRED ACCESSORIES
Bay Door and Louver Kits
Charcoal Textured iron
Satin pewter and charcoal Satin pewter
Charcoal Gold
NOTE: Charcoal Bay Door and
Louver Kit is standard. Also
shown are gold and brushed
stainless steel kits with
optional bay window trim.
Brushed stainless steel
NOTE: A flat or beveled surround can be used with each
door or louver option. This applies to all Louverless,
Bay Window and Traditional styles.
3
TRADITIONAL LOUVERS
STANDARD FEATURES (FOR ALL STYLES)
b ca
OPTIONAL ACCESSORIES (FOR ALL STYLES)
1 2
Shown with flat louver kit,
twin pane door kit and beveled surround.
REQUIRED ACCESSORIES
Flat Louver Kits
Charcoal
Brushed stainless steel
OPTIONAL ACCESSORIES
Twin Pane Door Kit
Charcoal
Gold
3 4
5 6
STANDARD FEATURES
a. Heat-activated blower
with variable speed control
conveniently located on
the surround
b. Split oak-style ceramic log set
features realistic detail for
an authentic look
c. Realistic dancing flames,
glowing logs and embers
Standing pilot millivolt
system – does not require
electricity, so even if the
power goes out, the fireplace
can be lit to provide a
source of heat.
All backed by the Lennox
20-year limited warranty
OPTIONAL ACCESSORIES
1. Brickaded Interior Kit
2. Hearth Riser Kit
3. Remote Control
4. Thermostat
5. Flat Surround
recommended for irregularshaped openings and inside fit
installations (trimmable and
provided unpainted)
6. Beveled Surround
recommended for outside
fit installations
NOTE: A flat or beveled
surround can be used with
each door or louver option.
4
DIRECT-VENT AND B-VENT OPTIONS
Elite™ Series gas inserts are available in two venting
configurations. Direct-vent models receive 100% of their
combustion air from outside of the home for greater
efficiency and are ideal for airtight homes. We also offer
B-vent inserts that draw combustion air from inside the
home so they require less chimney flue space for ducting.
Both systems feature ceramic glass panels that seal the
combustion area for efficiency and safe indoor air quality.
Outside Exhaust
Outside Intake
Warm Air Out
Sealed
Combustion Area
Ceramic Glass
Ceramic Fiber
Log Set
Outside Exhaust
B-vent
Warm Air Out
Sealed
Combustion Area
Ceramic Glass
Ceramic Fiber
Log Set
MINIMUM FIREPLACE OPENINg
MODEL FRONT WIDTH (A) HEIGHT (B) DEPTH (C) BACK WIDTH (D)
EDVI25 27" 19" 14-1/2" 23-1/4"
EBVI25 27" 19" 14-1/2" 23-1/4"
EDVI30 26-1/2" 22" 14" 22-1/2"
EBVI30 26-1/2" 21" 14" 22-1/2"
EDVI35 32-1/4" 25" 17" 25"
Typical Fireplace
MINIMUM CLEARANCE TO COMBUSTIBLES
Side View
B
A
Front View
C
D
MODEL ADJACENT WALL INSERT TO MANTEL FLOOR MINIMUM*
EDVI25 8" minimum 12" to 15-1/2" minimum** 0" to non-combustible
EBVI25 8" minimum 12" to 15-1/2" minimum** 0" to non-combustible
EDVI30 8" minimum 12" to 18" minimum** 0" to non-combustible
EBVI30 8" minimum 12" to 18" minimum** 0" to non-combustible
EDVI35 8" minimum 12" to 18" minimum** 0" to non-combustible
* Requires up to 16" hearth extension from fireplace face. If hearth is elevated 7" min.,
no hearth extension is required. Refer to owner’s manual.
** Minimum mantel height from top of louvers varies depending on mantel projection.
Please refer to owner’s manual.
Cool
Room Air In
Air Blower
DIrEcT-VENT
Draws combustion air from
outside and returns combustion
exhaust back to the outside of
the house.
SPECIFICATIONS
MODEL GAS
NG 25,000 65% 86%
EDVI25
LP 25,000 66% 89%
NG 25,000 64% 79%
EBVI25
LP 25,000 68% 81%
NG 30,000 69% 87%
EDVI30
LP 28,000 70% 89%
NG 30,000 62% 83%
EBVI30
LP 28,000 60% 82%
NG 35,000 66% 86%
EDVI35
LP 34,000 70% 88%
*Based on maximum vent configuration.
Cool
Room Air In
B-VENT
Draws combustion air from
inside the home and vents
combustion exhaust to
the outdoors.
BTU/HR ENERGUIDE STEADY STATE
Air Blower
*
5
DIMENSIONS
DIRECT-VENT INSERTS
EDVI25 EDVI30 EDVI35
A 26-5/8"
B 20-1/2"
C 13-3/8"
Small 41-1/16"
D Medium 44-1/8"
Large N/A 49-1/4"
Small 26-1/16"
E Medium 27-5/8"
Large N/A 30"
D 48"
E 34"
F 19-1/2"
G 1-15/16"
H see note** 9-15/16"
I 1-1/4"
J 17-1/4"
K 15-1/2"
L
M 24-7/8"
10-7/8"
( 676 mm )
( 521 mm )
( 356 mm )
Beveled Surround
( 1043 mm )
( 1121 mm )
( 662 mm )
( 702 mm )
( 1219 mm )
( 834 mm )
( 483 mm )
( 49 mm )
1-15/16"
( 32 mm )
1-9/16"
( 438 mm )
( 405 mm )
( 276 mm )
( 632 mm )
25-15/16"
22-1/4"
13-3/8"
40-1/4"
45-3/4"
27-1/2"
30-1/4"
Flat Surround*
48"
34"
20-7/8"
20-1/4"
15-1/4"
11-3/16"
23-1/4"
( 659 mm )
( 578 mm )
( 341 mm )
( 1022 mm )
( 1162 mm )
( 1251 mm )
( 699 mm )
( 768 mm )
( 762 mm )
( 1219 mm )
( 834 mm )
( 530 mm )
( 46 mm )
( 252 mm )
( 37 mm )
( 514 mm )
( 387 mm )
( 284 mm )
( 591 mm )
32-1/4"
24-1/4”
16-7/8"
N/A
48-1/16"
N/A
N/A
34-1/16"
N/A
50"
40"
26-11/16"
1-15/16"
9-7/8"
1-5/8"
24"
18-3/4"
15-5/8"
29-7/16"
( 814 mm )
( 614 mm )
( 427 mm )
( 1221 mm )
( 865 mm )
( 1270 mm )
( 1016 mm )
( 678 mm )
( 46 mm )
( 251 mm )
( 41 mm )
( 610 mm )
( 467 mm )
( 397 mm )
( 748 mm )
B-VENT INSERTS
EBVI25 EBVI30
A 26-1/2"
B 20-1/2"
C 13-5/8"
Small 41-1/16"
D Medium 44-1/8"
Large N/A 49-1/4"
Small 26-1/16"
E Medium 27-5/8"
Large N/A 30"
D 48"
E 34"
F 19-3/8"
G 1-15/16"
H 11-1/4"
I 1-1/4"
J 17-5/16"
K 15-1/4"
L 10-7/8"
M 24-7/8"
( 675 mm )
26-1/16"
( 520 mm )
22-3/8"
( 340 mm )
13-5/8"
Beveled Surround
( 1043 mm )
40-1/4"
( 1121 mm )
45-3/4"
( 662 mm )
27-1/2"
( 702 mm )
30-1/4"
Flat Surround*
( 1219 mm )
48"
( 834 mm )
34"
( 493 mm )
20-7/8"
( 49 mm )
1-15/16"
( 282 mm )
11-1/4"
( 31 mm )
1"
( 439 mm )
20-1/8"
( 388 mm )
15-5/8"
( 276 mm )
( 632 mm )
* The flat surround is provided unpainted and is designed to be custom
trimmed by your installer to fit the shape and dimensions of an inside
fit installation. Paint after trimming. See installation instructions for
complete information.
** Air inlet = 10-9/16
Exhaust outlet = 9-5/8
"
( 268 mm ) and
"
( 224 mm )
12-3/8"
23-3/4"
( 662 mm )
( 568 mm )
( 340 mm )
( 1022 mm )
( 1162 mm )
( 1251 mm )
( 699 mm )
( 768 mm )
( 762 mm )
( 1219 mm )
( 834 mm )
( 530 mm )
( 46 mm )
( 292 mm )
( 25 mm )
( 508 mm )
( 384 mm )
( 314 mm )
( 595 mm )
Products You can count on
Lennox is committed to providing you with high-quality products.
A qualified dealer can help you find the right product to give you
years of comfort and enjoyment.
© Lennox Industries Inc. 2007
Visit us at www.lennox.com, or contact us at 1-800-9-LENNOX.
PC4917 5
7851 27M Re v. 10 3 /07
NOTE: Diagrams, illustrations and photographs are not to scale –
consult install ation instruc tions. Product designs, materia ls,
dimensions, specifications, colors and prices subject to c hange or
discontinuance without notice. Square- foot heating capacities are
approximations only. Local con ditions, such as elevation, wind, vent
configuration and cho ice of fuel will affect the overall appearance of
the fire and heating performance. Performance can also var y with
home design and insulation, ceiling heights, climate, accessories
chosen, appliance location and how the appliance is operated.
Approved to U.S. and Canadian safety and per formance standards
– ANSI Z21.88/CSA 2.33-M98 vented gas fireplace heaters.
Loading...