Lennox Hearth AKC-DV, AKT-DV User Manual

HEARTH PRODUCTS

KITS AND ACCESSORIES

SYMMETRY SERIES ANDIRON KIT

INSTALLATION INSTRUCTIONS FOR THE ANDIRON KIT

FOR USE WITH SYMMETRY SERIES GAS FIREPLACES

Symmetry Series Andiron Kits

Model

Number

AKT-DV H7410

AKC-DV H7411

Catalog
Number

Traditional - AKT-DV

Andirons

Corinth - AKC-DV

KIT CONTENTS

2 - Andirons, 4 - Attaching Screws and these instructions.

TOOLS NEEDED - Phillips Head Screwdriver.

INSTALLATION INSTRUCTIONS

Step 1. Follow the procedure "Turning Off Gas To Unit", located on

the Lighting Instructions pullout labels in the control compartment of
the unit and in the Installation Instructions (P/N 506023-08) provided
with the appliance.

Step 2. Refer to the appliance Care and Operations Instructions (P/N
506025-01) to remove the front glass enclosure panel and gain ac­cess to the firebox interior.

Sub-Floor Holes

Figure 1

Traditional Andrion

Attaching Bracket And Screw

Step 3. Align the holes on the Andiron brackets, with the holes

on the fireplace sub-floor and attach the Andiron with the provided
attaching screws (see Figure 1 ). It is recommended that two (2)
screws be used for each Andiron, however one (1) screw may be
used, depending on placement of the Andiron.

Step 4. Place all Lava Rock and Rockwool according to the appliance
Care and Operation Instructions (P/N 506025-01).

Step 5. Refer to the appliance Care and Operations Instructions (P/N
506025-01) and re-install the front glass enclosure panel.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.

Printed in U.S.A. © 2009 by Lennox Hearth Products

P/N 506019-43 REV. N/C 05/2009

LHP
1110 West Taft Avenue • Orange, CA 92865