Lennox Hearth 506033-19 User Manual

HEARTH PRODUCTS

KITS AND ACCESSORIES

506033-19
REV. NC 09/2011

INSTALLATION INSTRUCTIONS FOR LEG BOLT DOWN KIT FOR USE WITH THE
BELLA™ PELLET STOVE AND THE GRANDVIEW™ WOOD STOVE

KIT CONTENTS (See Figure 1)

2 ea. Leg Bolt Down Brackets
1 ea. Instruction Sheet

Leg Bolt Down Kit *

Cat. No. Where Used

H7665 Leg Bolt Down Kit, Manufactured Homes

* This Kit is Provided with the Bella Pellet Stove. It is sold separately for the
Grandview Wood Stove

TOOLS NEEDED

Ratchet and Socket of proper size to install, field provided, lag screws

INSTALLATION INSTRUCTIONS

Step 1. Secure the legs of the appliance to the floor using 1/4" diameter lag

screws. The lag screws (field provided) must be an adequate length to
extend through the hearth pad and into the floor. Install the brackets
and two lag screws as shown in Figure 2.

Bella

MANUFACTURED HOME LEG BOLT DOWN KIT

BELLA™ / GRANDVIEW™

Figure 1 - Kit Contents

GENERAL INFORMATION

If you encounter any problems, need clarification of these instructions or
are not qualified to properly install this kit, contact you local distributor
or dealer.

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY
TO THESE INSTRUCTIONS.

TURN OFF THE STOVE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.

Lag Screw

Bracket

Attach the provided brackets to the stove using a 5/16" bolt. Install lag
screws through the holes in the bottom of the brackets to secure the legs
to the floor as shown here.

Grandview GV230

Coastal Leg Lakeview Leg

Figure 2 - Manufactured Home Installations

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

1

IMPORTANT NOTE: See the Installation and Operation Manual, pro-

G -

G.

I

I

vided with the stove for additional requirements for manufactured
home installations.

Bolt Down Brackets

Leveling Legs

The leg leveling kit can be used in conjunction with the optional leg
leveling kit (H7638), as shown here. If ordered, install leveling legs per
instructions provided in kit.

Figure 3 - Optional Leg Leveling Pad Kit

Chassis

Floor

Floor
Protector

Lag Screws

Figure 4 - Manufactured Home Installation

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design,
materials, specifications, prices and the discontinuance of colors, styles and products. Consult
your local distributor for fireplace code information.

Printed in U.S.A. © 2011 Lennox Hearth Products

2

P/N 506033-19 REV. NC 09/2011

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

1508 Elm Hill Pike, suite 108 • Nashville, TN 37210