Lennox GRANDVIEW User Manual

HEARTH PRODUCTS

KITS AND ACCESSORIES

P/N 506033-52 Rev. NC, 08/2011

INSTALLATION INSTRUCTIONS FOR INSTALLING LEGS ON A GRANDVIEW™ 230 WOODSTOVE

KIT CONTENTS

Please ensure that all these parts are included

4 ea. Legs 4 ea. Hex Bolts 3/8” x 1” Length 4 ea. Washers 3/8”

Grandview™ Leg Kits

Cat. No. Model Description

H8339 LEG-COSTL-BLK Coastal Legs, Black

H8340 LEG-COSTL-BRNKL Coastal Legs, Brushed Nickel

H8341 LEG-COSTL-NKL Coastal Legs, Nickel

H8342 LEG-LKVIEW-BLK Lakeview Legs, Black

70000 LEG-OLY-B Olympic Sculptured Black

70002 LEG-OLY-N Olympic Sculptured Nickel

70008 LEG-OLY-BRN Olympic Sculptured Brushed Nickel

TOOLS NEEDED

GRANDVIEW™ LEG KITS

INSTALLATION INSTRUCTIONS

Step 1. Carefully place stove on it’s back. Be careful not to scratch the

stove,use a piece of cardboard or carpet to protect the back of the stove.

Step 2. Using a 9/16” wrench or socket remove the bolt in each of the four

corners along with the attached shipping brackets.

Step 3. Remove legs from the packaging and using the bolts and washers

that come with the legs install each leg in each corner with one bolt and one washer.

Step 4. Before the legs are fully tightened down make sure that they are

aligned correctly to match the front and side planes of the stove.

Step 5. The stove can now be set up on the legs making sure that all bafﬂe

boards and bricks are set back in place. These items may have shifted when the stove was placed on it’s back.

Step 6. If it is necessary to level, secure, or ground your stove, use the

holes in the bottom of the leg for those applications. To level the stove use leg leveling kit (P/N H8407) or leveling pads (P/N H7638). Level by adjusting the bolt or leveling pad down on each leg that is not in full contact with the hearth or surface below that the stove in located on.

9/16” Open End Wrench Or Socket

GENERAL INFORMATION

If you encounter any problems, need clariﬁcation of these instructions or are not qualiﬁed to properly install this kit, contact you local distributor or dealer.

Read this instruction sheet in its entirety before beginning the installation.

ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS.

Check the contents of the kits upon receipt and check for any damaged or missing parts. If there is hidden damage, notify your freight company or Lennox Hearth Products dealer immediately.

CAUTION: Wear gloves during installation in case of sharp edges on the stove.

Be sure to clean plated surfaces with a soft cloth and household glass cleaner prior to burning the appliance. Fingerprints left on plated surfaces while burning may remain on the ﬁnish permanently.

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, speciﬁcations, prices and also to discontinue colors, styles and products. Consult your local distributor for ﬁreplace code information.

P/N 506033-52 Rev. NC 08/2011

Figure 1

Lennox Hearth Products 1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210