Lenco HP-080 User Manual
Noise Cancelling Headphone
③ When you turn off the headphone, you can use it as a normal stereo wired
headphone.
4. Parameter
Users` manual
HP - 080
HP-080 Noise Cancelling Headphone adopt special electrical circuit to
reduce the surrounding noise, which can improve hearing effect. Even if in noisy
environment you may enjoy high quality stereo music.
1.Features
①② This item is suitable for any audio devices.
Own stereo headphone and stereo noise cancelling headphone function.
(Switch on the noise cancelling function when you are in noisy envoirnment)
2.Parts Introduc tion
3.User's Manual
①② Mount 2 AAA batteries in the battery case.
Turn on the power switch, the power indicator will be on. Connect the audio
device with the headphone, adjust the volume properly, you will sense that noise
outside is decreased a lot.
x
① （ ）
Working Volt: DC 3V
Working Current:<55mA (0.7 sine wave loading volt)
②
③
Noise Reduction: >16dB at F=300Hz
④ ±
Sensitivity: 114dB
⑤
Frequency Response:20Hz~20KHz
2 AAA batteries
x
2 dB at F=1KHz
5.Working condition
Working temperature: -10
① ℃ ℃
②
When use this item, try to avoid overloading signal input, operate it in the
range of the power input extension.
~60 , working humidity:20%~90%
6.Problem and Solution
Prob lem Ca us es
Noise cancelling
function doesn't
work
Caution: When not use them, please turn off the headphone. And pop the batteries
if you won't use them for a long time. Try to avoid touching this item with sharp
object in order not to influence the appearance.
Doesn't mount battery or reverse
the polarities, battery run out
of ,or the power is lower
Solu tions
Replace the old battery with
new one ,meanwhile mount the
battery according to the engraved
polarities .
Loading...