Leica 777068-R, 777067-R, 820685, 817857, 817856 User Manual

...
Leica Lino L360, L2P5, L2+, L2G+
, L2,
P5, P3
User Manual
Version 757665i
English
Congratulations on your purchase of the Leica Lino.
The safety instructions follow the section on how to operate the instrument. Before starting up the
instrument for the first time, please read through the entire User Manual paying special attention to the section Safety Instructions .
Contents
Start up ................................................................ 1
Operation............................................................. 3
Technical data ................................................... 12
Safety instructions ........................................... 14
Start up
Inserting / replacing batteries
Slide the locking button forwards to unlock the battery compartment. Open the battery compart­ment cover and insert the batteries, observing the correct polarity. Then press the battery compartment cover back down until it engages.
The battery symbol 9 lights up when the battery voltage is too low. Replace the batteries as soon as possible.
Leica Lino 757665i en
Insert the batteries observing the correct polarity
Use alkaline batteries or rechargeable batteries only
Remove the batteries if the instrument is not to be used for a long period of time (to prevent corrosion)
L2, P3, P5
L2P5, L2+, L2G+
1
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
de
Charging / first-time use
en
The battery must be charged prior to first use
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
because it is delivered with as low an energy content as possible.
The permissible temperature range for charging is between 0°C and +40°C/+32°F and +104°F. For optimal charging we recommend charging the batteries at a low ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.
It is normal for the battery to become warm during charging.
L360
Lino L360
1
1 Jack for battery charger
Start up
7 h
Storage of L360 NiMH Batteries
Ensure that the product is stored in dry environ­ment with a temperature range of 0°C to +20°C / 32°F to 68°F, in order to minimize the discharge rate of the battery.
Recharge batteries before longer storage periods.
At the recommended storage temperature range, batteries can be stored up to 6 months, after which the batteries should be fully recharged.
After longer storage intervals, please recharge batteries before use.
2
Leica Lino 757665i en
Operation
3
Lino L360
Keypad and control elements
1 LASER key 2 PULSE/POWER SAVE MODE key 3 Lock switch
Display
4 Laser crossline 5 Horizontal laser line 6 Vertical laser line 7 Locked 8 Pulse/Power save mode ON 9 Battery voltage too low AT Plumb and crossline intersection point AK Plumb point AL Laser switched on
Leica Lino 757665i en
647
Lino L360
519 82
7 5
Lino L2P5
6 1
8 10
11 2
9
en
F
I
E
P
NL
DK
S
N
FIN
de
7 5
6 1
Lino L2
+
7 5
8
6
2
1
9
Lino L2G
+
9
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
9
LV
EST
SLO
6 5 4
2
1
Leica Lino L2
7 8 9
Leica Lino P3
12
1
SK
3
Operation
m
TR
de
Switching on/off
en
Lino L360, L2P5, L2+, L2G+, and L2:
ON: Briefly press the LASER key 1.
F
OFF: Press and hold down the LASER key 1.
I
E
Laser functions
P
Pressing the LASER key 1 activates the following laser functions:
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Action
1x
2x
3x only vertical again as 1x all points again as 1x only vertical only vertical only vertical again as 1x
4x again as 1x -
5x - - again as 1x - - - - - -
Operation
L360 L360 L2P5 L2P5
not in Lock
mode
horizontal
and vertical
only
horizontal
in Lock
mode
only
horizontal
only vertical
not in Lock
mode
horizontal
and vertical
all lines and
points
only plumb
point
in Lock
mode
only
horizontal
only vertical
- again as 1x again as 1x again as 1x - again as 1x
Lino P3 and Lino P5:
ON: Move the Lock switch 3 to the right.
OFF: Move the Lock switch 3 to the left.
L2 L2+ L2G+ P3 P5
horizontal
and vertical
only
horizontal
4
horizontal
and vertical
only
horizontal
horizontal
and vertical
only
horizontal
all 3 points all 5 points
only plumb
points
Leica Lino 757665i en
only plumb
points
plumb point
and right/left
Self-levelling and Lock functions
The instrument automatically levels itself within the specified grade range (Refer to "Technical data") .
Press the Lock switch 3 in order to transport or tilt the instrument beyond the self-levelling range. When locked, the pendulum is fixed and the self-levelling function is deactivated.
Leica Lino 757665i en
Pulse/Power save mode
(only Lino L360, L2P5, L2+, and L2)
The instrument is fitted with a Power save mode. If particularly good visibility of the laser line is not necessary and you wish to save energy, you can switch the Pulse mode on and off by pressing the PULSE/POWER SAVE MODE key 2. To be able to detect the laser lines over long distances (> 15 m) or in unfavourable lighting condi­tions, a laser detector can be used. The detector is able to locate the laser beam in Pulse mode, even over long distances.
(Laser detector refer to accessories)
The L2G+ operates in a continuously pulsed
mode to optimize battery life and visibility, and as a consequence the L2G+ has no pulse/Power save button.
5
Operation
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
de
Applications
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
Operation
m
TR
6
Leica Lino 757665i en
Loading...
+ 14 hidden pages