Swifts® cable ladder supports
C ABD
90° end connectors
150125100
90° end connectors are used to fix the end of a cable ladder run to a
vertical surface (steel, concrete or masonry)
Supplied in pairs with bracket to ladder fasteners
■ Installation (typical)
Ladder range
Topaz Sapphire Emerald
Cat. Nos.
ZB F PB F EB F
Quantity of fasteners
per bracket
4 4 4
■ Assembly
Connector to ladder fasteners (included)
A Side rail
B Bracket
C M10 x 20 coachbolt
D M10 flange nut
■ Dimensions and weights
Medium duty (Topaz) ZB F Heavy duty (Sapphire) PB F and
extra heavy duty (Emerald) EB
Two
Ø11
holes
Eight 37 x 13
rectangular
slots
C
A
Four 37 x 13
rectangular
Two
Ø11
holes
E
B
Weight
Cat. Nos. A B C D E (kg)
slots
C
D
E
A
B
ZB F 127 47 1·5 84 50 0·3
PB
F 127 47 2·0 115 75 0·5
EB
F 127 47 2·0 140 75 0·7
Weights
All weights given are in kilograms (kg) and are for a pair of
connectors in hot dip galvanised G finish
To obtain the appropriate component weight in other
finishes, multiply the given weight by the following factors :
Deep galvanised (D) x 1·07
Stainless steel (S) x 0·94
Powder coated (E) x 0·97
F
D
Fastener finishes
For ladders with G, D and E finishes, fasteners are high tensile
Grade 8.8 hot dip galvanised
For ladders with S finish, fasteners are corrosion resistant stainless
Grade A470
An alternative material for fasteners may be required depending on the
installation environment - contact us on +44 (0) 845 605 4333
Key : Replace the letter shown in red with your choice from the
following options :
F = Finish : G (hot dip galvanised after manufacture)
D (deep galvanised)
S (stainless steel)
E (powder coated)
All dimensions (mm) are nominal
78
Loading...