![](/html/61/6135/6135be9f58b3f8698193e5e590790e97afce4a0cfd64b894d6c852248e6c75c3/bg1.png)
Flat Panel TV Installation
Mounting a flat-panel TV on the wall
is easy when you can hide the cables.
Below you’ll find an easy-to-follow
guide outlining how to mount a flat-
panel TV on the wall using just two
products from Legrand.
WP1014-WH-V1
In-Wall Cable Access
Port
1. ITEMS NEEDED
HT2102-WH-V1
Flat Panel TV
Connection Kit
LEGRAND PRODUCTS:
Flat Panel TV Connection Kit
(HT2102-WH-V1)
In-Wall Cable Access Port
(WP1014-WH-V1)
1-Gang, New Work, Low Voltage
(F9059-01-V1 Bracket)
2. GETTING STARTED
First, determine where to draw
power for this product. You can see
in Figure 1 that the incoming cable
wire and power outlet are side by
side, but too far away from ideal
mounting height.
TOOLS & ADDITIONAL SUPPLIES:
• Drywall Saw • Screwdriver
• Cable Stripper • Electric Tester
• Level • Drill
• Tape Measure • Electrical Wire
• Appropriate Mount for TV
If you lack an outlet at ideal
mounting height, consider existing
alternatives. In this example, the
adjacent master bedroom wall has
a power outlet in the same stud bay
that you can tap for current.
APPROXIMATE PROJECT
COMPLETION TIME:
2 Hours
Next, measure where the power
outlet is located to determine
placement for the Brush Strap
installation.
Figure 1 Figure 2 Figure 3 Figure 4
www.legrand.us/onq
![](/html/61/6135/6135be9f58b3f8698193e5e590790e97afce4a0cfd64b894d6c852248e6c75c3/bg2.png)
Flat Panel TV Installation
3. INSTALLATION
For Brush Strap installation, trace the existing on-wall
product as a guide (Figure 1). If no on-wall product exists, use
the template included on the back of box housing the Legrand
Flat Panel TV Connection Kit. After completing the outline,
cut holes for the product (Figures 2-4), run electrical cable
(Figure 5), and rewire the outlet.
Figure 1
Figure 3 Figure 4 Figure 5Figure 2
Next, insert the products into the rough-in holes and pull the HDMI
cable from the upper hole down to the lower one (Figure 6).
After you’re finished wiring the outlet, attach the wallplate (Figure 7)
and secure the box to the wall (Figure 8).
Finally, following the instructions provided by the manufacturer, attach
the mount to the wall and carefully hang the television (Figure 9).
Figure 6
Figure 8 Figure 9Figure 7
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800) 321-2343
©2011 by Legrand. All Rights Reserved.
www.legrand.us/onq