Legrand WKD ProSeries Underfloor Duct Flush Carpet User Manual

Duct Opening Reducer

No. 4 Duct to No. 2 Duct

Cat. No. 275SR/275SL
INSTALLATION

INSTRUCTIONS

Walker®electrical systems conform to and should
be properly grounded in compliance with require­ments of the current National Electrical Code or
codes administered by local authorities.

All electrical products may represent a possible
shock or fire hazard if improperly installed or
used.Walker electrical products may bear the
mark as UL Listed and/or Classified and should
be installed in conformance with current local
and/or the National Electrical Code.

1. Position adaptor

at angle
shown relative
to opening.

2. Insert end of narrow

leg into box opening
and rotate part
toward opening.

3. Complete installation

by striking part until
fully inserted
into opening.

4. Install duct step

utilizing the
double backed
adhesive tape.

5. Insert No. 2 duct

into opening until
end of duct is
against duct stop.

6. Insert legs of ground clip

into the triple slot opening
and drive in with a hammer
until fully seated in place.

Walker Systems, Inc.
A Wiremold Company, Williamstown, WV 26187

IB0173 997

©1997 The Wiremold Company

Ground Clip

No. 2

Duct Step

No.4

Duct Opening

Duct Stop Edge

Strike This End
With a Hammer

Duct Spacer

No.2 Duct

Insert This
End First

NOTE: No.275SR Adaptor Shown.
No.275SL Adaptor is Mirror Image

Triple Slot Opening

Grooved Slot