Legrand TS User Manual

TableSource

™

Work Surface Modules

I N S T A L L A T I O N I N S T R U C T I O N S

nstallation Instruction No.: 42073R1 – Updated December 2011

I

INSTALLATION:

Legrand/Wiremold electrical systems conform to and should be properly
grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire
hazard if improperly installed or used. Legrand/Wiremold electrical
products may bear the mark of a Nationally Recognized Testing
Laboratory (NRTL) and should be installed in conformance with current
local and/or the National Electrical Code.

IMPORTANT: Please read all instructions

before beginning.

NOTE: Use No. 8 (5/16" [7.9mm] head size) flat head fastener or equivalent

to secure mounting clip onto table surface (top or bottom).

REMOVAL:

ASSEMBLY:

INSTALLATION: REMOVAL:

Foam

Remove
Adhesive
Covering

© Copyright 2011 Legrand/Wiremold All Rights Reserved

WIREMOLD

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX [phone] • Outside U.S.: 860-233-6251

Canada:

570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX [phone]

42073R1 1211