Legrand RC9APBK User Manual

RC9 Poke-Thru Abandonment Plate

Cat. No. RC9APBK

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 1 001 997 R1 – Updated November 2002

Products Covered: RC9APBK

Remove Cover.

Remove Two Flange Screws.

Attach Plate with Screws Provided.

Step 1

Step 2

Step 3

Completed Installation.

Walker®electrical systems conform to and should be properly grounded in compliance with requirements of the current National Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire hazard if improperly installed or used. Walker electrical products may bear the mark as UL Listed and/or Classified and should be installed in conformance with current local and/or the National Electrical Code.

CAUTION: Abandonment plates are required to maintain the fire rating of the floor assembly whenever

a poke-thru fitting is abandoned or removed from the floor. The abandonment plate in these instructions is shown in the UL fire Resistance Directory.

The Wiremold Company

U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251 Canada: 850 Gartshore Street • Fergus, Ontario N1M 2W8 1-800-741-7957 • FAX 519-843-5980

1 000 776 R1 1202