P100
Player P100, P200, and P300
Product Manual
P200
P300
TABLE OF CONTENTS
Quick Links . . . . . . . . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . 4
The Nuvo Player Portfolio Audio System . . . . . . . . 4
Product Features. . . . . . . . . . . . . . . . .5
NV-P100-XX Single Zone Player
(Ethernet&Wireless). . . . . . . . . . . . . . . . . . .5
NV-P200-XX Single Zone Player
(Ethernet&Wireless) . . . . . . . . . . . . . . . . . . 6
NV-P300-XX Player Preamplifier
(Ethernet & Wireless). . . . . . . . . . . . . . . . . . .7
Setup and Installation . . . . . . . . . . . . . . 8
Network Requirements . . . . . . . . . . . . . . . . .8
Connecting Speakers to the NV-P100-XX and
NV-P200-XX . . . . . . . . . . . . . . . . . . . . . . . .8
Setting Up Your System Using the App. . . . .9
New System Setup . . . . . . . . . . . . . . . . . . . .9
Wired Setup . . . . . . . . . . . . . . . . . . . . . . .10
Wireless Setup . . . . . . . . . . . . . . . . . . . . . 11
Adding a Component to an Existing System . . . . . 12
Changing an Existing Ethernet Connected
ComponentTo Wireless . . . . . . . . . . . . . . . . 12
Using the Nuvo Player App . . . . . . . . . . 13
The Dashboard . . . . . . . . . . . . . . . . . . . . . 13
Music Selection . . . . . . . . . . . . . . . . . . . . . 13
Bluetooth Playback . . . . . . . . . . . . . . . . . . . 14
Direct Stream . . . . . . . . . . . . . . . . . . . . . . 14
Line In . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Media Servers. . . . . . . . . . . . . . . . . . . . . . 15
The Settings Menu . . . . . . . . . . . . . . . 16
Add a Nuvo Component . . . . . . . . . . . . . . . . 16
Zones . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Keypads . . . . . . . . . . . . . . . . . . . . . . . . . 18
This App . . . . . . . . . . . . . . . . . . . . . . . . . 18
Music Library . . . . . . . . . . . . . . . . . . . . . . 18
Music Services . . . . . . . . . . . . . . . . . . . . . 19
General . . . . . . . . . . . . . . . . . . . . . . . . . 20
International . . . . . . . . . . . . . . . . . . . . . . 21
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
The Music Share Software . . . . . . . . . . 22
Troubleshooting . . . . . . . . . . . . . . . . 24
Front Panel LEDs . . . . . . . . . . . . . . . . . . . .24
Not Connected . . . . . . . . . . . . . . . . . . . . . 24
Amazon Alexa Voice Control Integration. . . 26
Prerequisites . . . . . . . . . . . . . . . . . . . . . . 26
Connecting Alexa to Your Legrand Nuvo Player . . . 26
Setup Additional Music Service Providers. . . . . . . 29
Supported Alexa Commands . . . . . . . . . . . . . 29
Specifications. . . . . . . . . . . . . . . . . . 30
iOS and Android Requirements . . . . . . . . . . . . 30
NV-P100-XX Amplifier . . . . . . . . . . . . . . . . . 30
NV-P200-XX Amplifier . . . . . . . . . . . . . . . . . 31
NV-P300-XX Preamplifier . . . . . . . . . . . . . . . 32
Regulatory Compliance . . . . . . . . . . . . 33
Player Portfolio Audio System | Product Manual
2
QUICK LINKS
GENERAL
What is the Nuvo Player Portfolio System?
What wireless configurations are supported by the
Nuvo Player Portfolio System?
Where can I can I find more information on my Nuvo
Player?
The LED on my Player is flashing. What does that
mean?
Does my Player have international options?
NUVO P100, P200, AND P300
WIRELESS PLAYERS
SETTINGS MENU
What do all of the options on the settings menu do?
What is a zone?
How do I add a component to my system?
Can I change an existing Ethernet connected zone
into a wireless connection?
I didn’t register my Player during setup. How can I
register now?
STREAMED MUSIC
Can I stream music from a shared network library?
What is the difference between the P100, P200, and
P300 players?
Are there specific network requirements?
How do I set up my Nuvo Player?
Can I connect speakers to my Nuvo Player?
Where do I find the specifications for my Nuvo
Player?
NUVO PLAYER APP
How do I download the Nuvo Player app?
How do I use my Nuvo Player app?
What play options does my app offer?
What music services can I stream?
Are there special requirements for direct
streaming?
VOICE INTEGRATION
Can I connect my Alexa device?
Are there special requirements for voice integration
with my Alexa device?
Can I set up multiple music service providers?
What commands will Alexa Support?
Can I use Bluetooth® technology with my app?
Player Portfolio Audio System | Product Manual
3
OVERVIEW
Welcome to the Nuvo Player Portfolio Audio System!
This system offers you the opportunity to enjoy your favorite music from any room of your home, at any time, with
simplicity of operation. Imagine playing music from your personal library or easily streaming true, high-fidelity music
from the Internet by touching a button on your Apple or Android Wi-Fi-enabled portable device. Use this guide to set
up your audio system and begin filling your home with beautiful music.
THE NUVO PLAYER PORTFOLIO AUDIO SYSTEM
(Example shows a wireless set-up method.)
Internet
Professional Multi-Zone
Rack-Mount Players
Tabletop Speakers
Home Network
Control
Wired/Wireless
Single-Zone Players
Home Theater
Player Portfolio Audio System | Product Manual
4
PRODUCT FEATURES
NVP100XX SINGLE ZONE PLAYER ETHERNET&WIRELESS
FRONT PANEL
1 2 3 4
Item Name Description
1 Volume Down Decreases audio volume
2 Volume Up Increases audio volume
3 Mute Mutes/un-mutes audio
4 LED Indicator Indicates player status
BACK PANEL
43
1 2 5 6
Item Name Description
1 Ethernet RJ45 port for a wired connection to a network router
2 USB** USB connection port for sharing music content from a storage device
3 Audio In 3.5mm stereo analog line-level input port
4 Audio Out* 3.5mm stereo analog line-level output port
5 Speaker Outputs* Speaker connection ports
6 AC Universal AC power supply connection port
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
Player Portfolio Audio System | Product Manual
5
NVP200XX SINGLE ZONE PLAYER ETHERNET&WIRELESS
FRONT PANEL
1 2 3 4 5
Item Name Description
1 Volume Down Decreases audio volume
2 Volume Up Increases audio volume
3 Mute Mutes/un-mutes audio
4 Bluetooth Connects to saved paired devices, breaks current device connections,
5 LED Indicator Indicates player status
BACK PANEL
allows device discovery, and accepts pairing requests
543
1 2 6 7
Item Name Description
1 Ethernet RJ45 port for a wired connection to a network router
2 USB** USB connection port for sharing music content from a storage device
3 Audio In 3.5mm stereo analog line-level input port
4 Audio Out* 3.5mm stereo analog line-level output port
5 Setup Mic 3.5mm input for use with future software upgrades ONLY
6 Speaker Outputs* Speaker connection ports
7 AC Universal AC power supply connection port
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
Player Portfolio Audio System | Product Manual
6
NVP300XX PLAYER PREAMPLIFIER ETHERNET & WIRELESS
FRONT PANEL
1 2 3 4
Item Name Description
1 Volume Down Decreases audio volume
2 Volume Up Increases audio volume
3 Mute Mutes/un-mutes audio
4 LED Indicator Indicates player status
BACK PANEL
1 2 3 4 5
Item Name Description
1 Audio In Combination 3.5mm stereo line-level and mini TOSLINK optical input
2 Audio Out* Combination 3.5mm stereo line level and mini TOSLINK optical output
3 USB** USB connection port for sharing music content from a storage device
4 Ethernet RJ45 port for a wired connection to a network router
5 AC Universal AC power supply connection port
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
Player Portfolio Audio System | Product Manual
7
SETUP AND INSTALLATION
NETWORK REQUIREMENTS
A live Internet connection is necessary for initial setup of your Nuvo Player Portfolio System. For wired Ethernet
connectivity, a minimum 100 MB wired network is necessary for proper communication. Wireless-compatible devices
use dual band 802.11n wireless communication. To ensure that all components are compatible and communicating
correctly, it is strongly suggested that network routers using the older 802.11g protocol be upgraded to support
Multicast and UPnP and be Wi-Fi® Certified before you proceed with the setup.
When using an Ethernet connection to the system router, or for initial setup, make a connection from your home
network to one Ethernet port ( ) on the device, using a standard Ethernet cable.
CONNECTING SPEAKERS TO THE NVP100XX AND NVP200XX
The NV-P100-XX and NV-P200-XX players are equipped with five-way binding posts for connecting the amplified audio
signal to the speakers. (See Figure 1).
NOTE: Speakers can be bookshelf, floor-standing, or installed in the wall or ceiling. 16-gauge speaker wire is recommended. Up to 12-gauge speaker wire can be used, if desired.
The binding posts accept multiple methods for terminating the wire:
• Unscrew the post to expose the hole for the speaker wire. Strip approximately 1/4 inch of insulation from the inner
conductor wire, and insert the wire into the hole. Screw the post back into place until the wire is firmly secured.
• Terminate the speaker wire into “banana” plugs and insert those plugs into the end of the binding posts.
• Spade, pin, and wrapping connection methods are also acceptable.
IMP O R TANT: Be careful to keep the positive and negative speaker connections consistent at both ends. Crossing the positive (+) and negative (-) terminations inhibits the
audio quality coming from the amplifier.
Figure 1
Player Portfolio Audio System | Product Manual
8
SETTING UP YOUR SYSTEM USING THE APP
Once you have connected your system to the local network, you are ready to begin adding components in their desired
locations, naming those locations for local control, and creating your multi-zone music system. The process is easily
done from a compatible mobile device using the Nuvo Player app.
NEW SYSTEM SETUP
The Nuvo Player system is multi-lingual. Upon setting up a new system, the app automatically uses the default
language of your device. Once the system is setup up, if another language is desired, go to settings > international >
language and select another language.
Perform the following steps to set up your system:
IMPORTANT WIRELESS CONFIGURATION SETUP CONSIDERATIONS
Not all wireless networks and devices are supported. The Nuvo Player Portfolio wireless capable devices are Wi-Fi
Alliance Certified, so Wi-Fi Alliance Certified wireless access points and routers should be used. There may be cases
where non-Wi-Fi Alliance Certified devices work. Supported network modes and encryption methods include:
• 802.11n, WPA2 is recommended.
• 802.11ac is not supported. Wireless access points must be in 802.11n or 802.11n/ac mixed mode.
• WPA2 is only supported using AES.
Unsupported network modes and encryption methods are grayed out on the menu. The following network encryption
types are not supported:
• WPA1
• WPA2 Enterprise
• Guest networks
NOTE: WiFi® is a registered trademark of Wi-Fi Alliance®.
Figure 2 Figure 3 Figure 4 Figure 5
1. Download the Nuvo Player app to a mobile device connected to your home network. The app is available on the
App Store or on Google Play.
NOTE: Google Play and the Google Play logo are trademarks of Google LLC. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Player Portfolio Audio System | Product Manual
9
2. Select Setup my new system (See Figure 2).
NOTE: Control my system is used to connect a new mobile device to an existing system.
3. Select your location and press Next (See Figure 3).
4. Select Player as the component (See Figure 4).
5. Select a setup option (See Figure 5).
• For a wired setup, press Wired Single-Zone Player. Continue to “Wired Setup” on page 10.
• For a wireless setup, press Wireless Single-Zone Player. Continue to “Wireless Setup” on page 11.
NOTE: An Ethernet connection is required for initial setup, even if your Nuvo component will be used wirelessly.
WIRED SETUP
Figure 6 Figure 7 Figure 8 Figure 9
1. The app automatically searches for the Nuvo component (See Figure 6). Once a component is identified, the
screen shows a connection. (See Figure 7).
NOTE: If the connection fails, check that the component is connected to the same network as the mobile device running the Nuvo Player app.
2. Choose a name and icon for the zone, then press Next (See Figure 8).
NOTE: A name can be later edited by selecting Edit Name from the bottom of the app screen (See Figure 8).
3. The screen displays the zone and a message that the zone was added successfully. Press Done to complete the
setup (See Figure 9).
Player Portfolio Audio System | Product Manual
10
WIRELESS SETUP
Figure 10 Figure 11 Figure 12 Figure 13 Figure 14
1. Select No as the response to “Are you using a Nuvo Gateway?” (See Figure 10).
2. Confirm that the component is powered on and has an Ethernet connection to the same network as the mobile
device running the Nuvo Player app (See Figure 11). The status LED on the Player illuminates a solid green.
3. Press the Volume up and Mute buttons simultaneously on the component to initiate the binding process (See
Figure 12). Once bound, the component shows as connected (See Figure 13). The status LED on the component
illuminates a solid white and the app moves to the ZONE ICON screen.
4. Choose a name and icon for the zone, then press Next to continue (See Figure 14).
NOTE: A name can be later edited by selecting Edit Name from the bottom of the app screen (See Figure 14).
Figure 18
Figure 15 Figure 16 Figure 17
5. The screen displays the zone and a message that the zone was added successfully. Select Wireless Setup to
search for available wireless networks. (See Figure 15).
6. After the networks have been discovered (See Figure 16), select the same network as where the Nuvo Player app
is connected, then enter the password for the network. Select Join. (See Figure 17).
7. If the correct password is entered, “Joining” displays on the screen. When successfully connected, the screen
displays a successful connection message (See Figure 18).
Figure 19 Figure 20
NOTE: If an incorrect password is entered, Connection Failed displays and you need to enter the password again.
8. The screen shows the connection in the wireless settings (See Figure 19). Press Done to continue.
9. If you are prompted to register, choose one of the following options:
• Complete the registration form and select Register.
• Select Later to register the product at a later date (See “General” on page 20 for more detail).
Player Portfolio Audio System | Product Manual
11
0. The screen displays Setup Complete! (See Figure 20). Select Finish and the app jumps to the HOME screen.
a. Remove the Ethernet connection from the player.
NOTE: A software update may be necessary for any Nuvo components. If prompted with an update, select Continue to update the firmware.
ADDING A COMPONENT TO AN EXISTING SYSTEM
See “Add a Nuvo Component” on page 16.
CHANGING AN EXISTING ETHERNET CONNECTED COMPONENTTO WIRELESS
IMP O R TANT: This section only applies to players that are capable of being wireless. Rackmount players do not have a wireless option.
Figure 21 Figure 22 Figure 23 Figure 24 Figure 25
To change a wireless-capable component from wired operation to wireless operation, perform the following steps:
1. Navigate to the SETTINGS menu (See Figure 21). Refer to “The Settings Menu” on page 16 for more detail.
2. Choose the zone name for update (See Figure 22).
3. Select the Wireless option (See Figure 23).
4. Select the Network option (See Figure 24).
5. Select the same network as where the Nuvo Player app is connected (See Figure 25), then enter the password for
the network. Select Join. (See Figure 17).
6. If the correct password is entered, “Joining” displays on the screen. When successfully connected, the screen
displays a successful connection message (See Figure 18).
NOTE: If an incorrect password is entered, Connection Failed displays and you need to enter the password again.
7. The screen shows the connection in the wireless settings (See Figure 19). Press Done.
Player Portfolio Audio System | Product Manual
12
USING THE NUVO PLAYER APP
The Nuvo Player app offers wireless system control from any Wi-Fi-enabled mobile device. The Nuvo Player app is
available on the App Store or on Google Play. Both versions offer the same look and control options. When used with
tablets, the display is optimized for a view of the complete system’s operation on one screen.
THE DASHBOARD
System control begins with the Dashboard. Each available zone is represented by an icon. To make a music selection,
drag and drop a zone into a zone group, or simply tap an inactive zone to activate the zone. Once your music selection
is made, the related album art and Now Playing information appears in the zone group. Play music on an individual
zone or share music across zones by dragging and dropping multiple zones into a single group. To deactivate a zone
and stop the music playback in that zone, drag the icon into the open dashboard area below the zone groups (See
Figure 26 & Figure 27).
Figure 26 Figure 27
MUSIC SELECTION
When a zone group is activated (See Figure 27), the app jumps to the music navigation pane (See Figure 28). From
there, any of the available streaming services (See Figure 29), personal music libraries (See Figure 30), Bluetooth®
(See Figure 31), Direct Stream, local Line-in sources (See Figure 32), or media servers can be selected for playback.
The available music choices are visible in a music selection ribbon at the bottom of the screen (See Figure 28). As you
scroll across the selections using your finger, the current service highlights and the display changes accordingly.
Figure 28 Figure 29 Figure 30 Figure 31 Figure 32
Player Portfolio Audio System | Product Manual
13
BLUETOOTH PLAYBACK
To take advantage of a Bluetooth connection, make sure that your mobile device’s Bluetooth is turned on, and you are
connecting to a Bluetooth-capable component. This is done within the mobile device’s settings. See Figure 33 for an
example of a Bluetooth setting screen on a mobile device. When in-range of a wireless-capable component, the name
appears on your device’s Bluetooth menu for pairing.
NOTE: A paired device remains paired and available when it is within range of the paired zone.
To connect a Bluetooth-capable component and initiate playback, select Bluetooth from the music selection ribbon
in the app, then select the desired paired component (See Figure 34). The app shows the selected component as
“Connected,” and the app switches to the Bluetooth streaming menu (See Figure 35). Music content is controlled from
the app on the connected mobile device (See Figure 36).
NOTE: Ensure volume on the connected device is up and the desired content is playing before connection.
Figure 33 Figure 34 Figure 35 Figure 36
DIRECT STREAM
If audio files such as MP3, AAC, FLAC, or other audio files are on the mobile device running the app, they can be
streamed directly to a zone by selecting the This <Device> icon. When This <Device> has been selected, all music
playable by the device is cataloged and listed in categories such as Artists, Albums, Tracks, Playlists, etc., similar
to what is presented when using the Library Source (See Figure 28). Select the desired function from the app music
selection ribbon. Once you initiate a source, the Grouping, Volume, Transport, Mute, and More options function as
when listening to other sources.
DIRECT STREAMING REQUIREMENTS:
• A device with the Nuvo Player app 1.8 or greater loaded.
• Firmware version 1.8 or greater on the Nuvo component.
• A device connected to the same network as the Nuvo component.
OPERATION NOTES:
• Once a device is direct streaming to a zone, other zones can join the same zone for listening but content cannot be
selected.
• Additional zones have transport control.
• Local joined zones have volume and mute control, as well as the ability to leave the group.
• The number of devices used in a system can’t exceed the number of zones available. A four-zone system can have
a maximum of four devices connected and streaming simultaneously. A sixteen-zone system can support up to
sixteen devices.
• Direct stream supports most device file formats.
Player Portfolio Audio System | Product Manual
14
LINE IN
Each component has a 3.5 mm stereo audio line in on the back panel. This input allows any compatible analog music
device to be plugged-in and added to the system as an additional source input. To do this, connect a 3.5 mm stereo
audio cable from the audio output on the compatible analog music device into the line in port on the back of the Nuvo
component “Product Features” on page 5 for the port location.
When a line-in music device is connected, select Line In from the app music selection ribbon. The device appears
on the LINE IN menu and is available for selection from any zone (See Figure 37). Once connected, the app switches
to the music menu and music content is controlled from the app on the connected mobile device (See Figure 38). A
“Rename” utility is available by touching the ... option next to the Line Input, which allows a specific name to be given
to the music device in the app.
Figure 37 Figure 38
MEDIA SERVERS
This music streaming service is for DLNA/UPnP media servers on a local network. It is an alternative option to a
Windows share when users have a local library to share. Devices include NAS drives, Windows machines, Mac OS
machines with additional software, etc. This option provides a faster browsing and refresh experience for larger
libraries.
There are a variety of potential router/computer/device-specific needs, so be sure to choose a compatible device. Open
your app, select Media Servers, and choose your content sorting option. (See Figure 39).
Figure 39
Player Portfolio Audio System | Product Manual
15
THE SETTINGS MENU
The SETTINGS menu has several selections important to the control and operation of your system. Press the (gear
icon) located at the bottom of the DASHBOARD (See Figure 40) to access the SETTINGS menu (See Figure 41). On
smaller format devices, if you are on the Now Playing screen or browsing musical selections (See Figure 42), the
(home icon) at the top of the screen returns the app to the DASHBOARD. From there, touch to access the SETTINGS
menu.
Figure 40 Figure 41 Figure 42
ADD A NUVO COMPONENT
When adding a component to an existing system, navigate to the SETTINGS menu, then select Add a Nuvo Component
(See Figure 43). Choose your component (See Figure 44), then follow the steps in “New System Setup” on page 9.
Figure 43 Figure 44
ZONES
Selecting Zones in the SETTINGS menu provides several controls for audio playback and functionality. When the
Zones button is touched (See Figure 45), the app displays the available zones within the system (See Figure 46). When
a zone is selected, individual settings and controls are available (See Figure 47).
Player Portfolio Audio System | Product Manual
16
Figure 45 Figure 46 Figure 47
The ZONE SETTINGS screen contains simple slider adjustments or on/off choices that control the sound for the
selected zone.
• Bass, Treble, and Balance: These three sliders offer individual control of each sound setting.
• Loudness: This toggle switch provides bass boost designed for low-volume listening.
• Fixed Volume Line Out: Each of the components has an individual audio line out. This feature allows the audio
output of the zone to supply to an additional amplifier, sub-woofer, or even headphones. By default, this feature is
set to off and the volume level of the output adjusts according to the volume setting set from the app. For some
uses, a fixed output volume level is required. For those instances, turn the feature on.
• Mono: When this feature is turned on, it sums the individual left and right stereo outputs into a single identical
audio output for each of the speaker terminals. This is useful when a single mono speaker provides all stereo
audio content to a zone, or if you have a large area in which both of the speakers need to be heard well at a
common listening position.
If you touch the Zone icon and name at the top of the ZONES SETTINGS screen (See Figure 48), the ZONE ICON page
appears. From there, select Edit Name to change a zone’s icon and name (See Figure 49).
The Wireless screen option allows wireless communication to be set at the default 2.4 GHz band or the higher 5 GHz.
In most settings 2.4 GHz is preferred. The 5 GHz option allows more streaming bandwidth and the traffic is much
lower. After turning on this feature, press and hold the Mute button for approximately six seconds, until you see the
LED flash. Release the button. The LED flashes red as the zone reconnects at the new frequency. When the process is
complete, the LED returns to a solid white state. The NV-P100-xx and NV-P200-XX have a “quick change” function for
toggling between 2.4 and 5 GHz communication (See Figure 50).
NOTE: The 5 GHz wireless range is lower than 2.4.
Figure 48 Figure 49 Figure 50
Player Portfolio Audio System | Product Manual
17
KEYPADS
Selecting Keypads from the SETTINGS menu (See Figure 51) allows you to manage the keypads on your system (See
Figure 52).
Figure 51 Figure 52
THIS APP
When This App is selected, a page appears with the app’s current software version information, a Reset button that
disassociates the app from the system, and scanning options (See Figure 53 – Figure 57).
Figure 53 Figure 54 Figure 55 Figure 56 Figure 57
MUSIC LIBRARY
Existing personal music is easily shared with the entire system by plugging a USB storage device into the
USBport( ) on the back panel of any of the components. The component automatically scans the drives content
and adds it, with associated album art, to the music library.
IMP O R TANT: Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
NOTE: Another way to add music is to use the Music Share software (See “The Music Share Software” on page 22).
Player Portfolio Audio System | Product Manual
18
Once music is added, select Music Library (See Figure 58). The MUSIC LIBRARY screen displays the number of
songs and file size of the accumulated library. It also shows the individual sources for music content (See Figure 59).
Choosing Add Share (See Figure 60) allows you to type in the network path to a directory or shared drive with music
content (See Figure 61). When a new library is added, it may take time for the content to be refreshed. The length of
time depends on the amount of content. The screen displays “Refreshing” while the files of the library are scanned.
Once the refresh is completed, the content is available for browsing and playback.
Figure 58 Figure 59 Figure 60 Figure 61
MUSIC SERVICES
When Music Services is selected (See Figure 62), the active streaming music services on the system display (See
Figure 63) along with a button for adding new services (See Figure 64). Most services require an online subscription
account. The associated user name and password for the music service account must be added under this menu
selection for the service to be active on the system.
Figure 62 Figure 63 Figure 64
NOTE: Music service availability is based on your region. The cost, functionality, and terms of subscription vary by service and are a function of the service provider.
Player Portfolio Audio System | Product Manual
19
GENERAL
When the General option is selected (See Figure 65), the screen displays four important choices for information about
the components of the system (See Figure 66).
• About gives specific component information for each zone (See Figure 67).
• Software Update shows any software updates available. Typically, updates automatically pop up on the app
screen and are already downloaded in the background. Select Install to update all of the zones in the system
automatically (See Figure 68).
• Registration opens the product warranty registration page (See Figure 69). The opportunity to register the
product is offered at the initial setup of the sys tem. If the registration is completed at that time, this system
selection is not necessary (See Figure 69 & Figure 70).
• Advanced opens the Reset System feature and the Auto Disband Inactive Groups feature (See Figure 71).
Figure 65 Figure 66 Figure 67 Figure 68
Figure 69 Figure 70 Figure 71
Player Portfolio Audio System | Product Manual
20
INTERNATIONAL
The International selection (See Figure 72), offers a Location setting (See Figure 73). When a country location is set
(See Figure 74), the legal wireless broadcast channel is set for the selected region. This is an important selection.
Language and Time Zone options are available for further customization (See Figure 75).
Figure 72 Figure 73 Figure 74 Figure 75
HELP
The Help option (See Figure 76), displays links to contact Nuvo directly, to reference information on various system
components, or to report a problem (See Figure 77–Figure 80).
Figure 76 Figure 77 Figure 78 Figure 79 Figure 80
Player Portfolio Audio System | Product Manual
21
THE MUSIC SHARE SOFTWARE
The Music Share Software allows music content from shared network locations and libraries, to be streamed from
any zone in the sys tem.
1. From your computer, go to http://www.legrand.us/resources-and-downloads/software-downloads to download
the music share software.
2. Follow the prompts for installing the software (See Figure 81).
Figure 81
3. The software connects to the network and displays a blank music share page. Choose the Add new option. The
music share choices open (See Figure 82).
Figure 82
4. The My Music folder is the default location for Windows Media Player libraries (See Figure 83). If your music is
stored on a Mac computer, or your preferred music library software is in iTunes, then select a different folder. A
progress window appears (See Figure 84).
Figure 83 Figure 84
Player Portfolio Audio System | Product Manual
22
5. You can also choose to share a specific folder or drive on the network. The A specific folder... choice opens a
browsing window (See Figure 85). From there you can choose a shared folder with music content or a drive that is
shared with the network.
Figure 85
All shared folders and drives display in the software (See Figure 86). Access the software at any time to add or remove
content.
NOTE: If you are sharing a personal library located on a personal computer hard drive, the software must be downloaded to that computer before the share is created.
Once a share directory is created, it is not necessary to keep the Music Share Software open. For the music content to
be available for music playback, the computer hosting the music content must be active on the same network as the
system.
Figure 86
Player Portfolio Audio System | Product Manual
23
TROUBLESHOOTING
FRONT PANEL LEDS
An important indicator of each Nuvo component’s operation is the LED light on the front panel. The color of the
LED, and the solid or flashing state, provides a visual reference for the status of operation. Refer to the chart for an
explanation of the functions and LED status (See Figure 87).
LED Color State of Component Explanation
Not Lit Component is not powered on.
Solid White Component is connected to the network and in normal operation.
Flashing White Component processor is busy; it should return to solid white.
Solid Red Hard failure. There is no network communication. Reboot by turning the power off and
Flashing Red Indicates that the component has lost network connectivity.
Solid Green Uninitialized state. The LED turns a solid white when the component is added to a
Flashing Green Busy uninitialized state. This is normal during the setup process. The LED turns white
Solid Blue Component is muted. When it is taken out of mute, the LED turns to a solid white.
Flashing Blue Indicates that the component is in Bluetooth discovery mode (only for
back on.
system and acquires a network address.
at completion of setup. It also means that the component is updating to a new version.
Do not unplug during this process. At the completion of the update, the LED returns to a
solid white state.
Bluetooth-compatible devices).
Figure 87
NOT CONNECTED
The NOT CONNECTED screen appears when the controller is unable to see the components in the system (See Figure
88). There are several potential causes and remedies for this state that are important for troubleshooting.
Figure 88
1. Check the power status of the component. It should have a solid white (blue if in Mute) LED light on the front
panel.
Player Portfolio Audio System | Product Manual
24
2. Verify that the mobile device running the app is connected to the correct WLAN (Wireless Local Area Network)
Wi-Fi SSID. If using a WAP (Wireless Access Point) make sure it is connected to the same LAN (Local Area
Network) router of the component.
3. Verify the router and WAPs are compatible with the component at: http://www.legrand.us/onq/router-
compatibility.aspx#.Vo_Zivi-2es.
4. Simplify the network infrastructure in the home. Remove any additional routers. Most residential networks only
require one router. The ISP Network Appliance should be the only router in the network.
5. Verify the router and WAP Filter Multicast or IGMP Proxy (Internet Group Management Protocol) setting is
disabled.
NOTE: This will require logging into the customer’s ISP Network Appliance.
• Multicasting/IGMP settings can typically be found under “Advanced Settings” or “IPTV” menu.
• Confirm that the multicasting for TCP/IPV4 function is enabled.
• Incorrect IGMP settings may cause a great deal of instability even if the app connects correctly.
6. Verify the router and WAP UPnP (Universal Plug and Play) setting is enabled.
NOTE: This will require logging into the customer’s ISP Network Appliance.
• UPnP settings can typically be found under the “Advanced Settings” or “WAN” menu items.
• Incorrect UPnP settings may cause a great deal of instability even if the app connects correctly.
NOTE: If multicasting or UPnP settings cannot be located in the router’s setup menu, a call to the ISP or third party manufacturer will be required to verify that the router
properly supports multicasting and UPnP. If it does not, the router will need to be replaced.
7. Verify the wireless settings of Dual Band 2.4GHz/5GHz devices.
NOTE: This will require logging into the customer’s ISP Network Appliance.
Legrand recommends that the 2.4GHz and 5GHz wireless networks be assigned separate SSID’s to ensure a
consistent connection.
Player Portfolio Audio System | Product Manual
25
AMAZON ALEXA VOICE CONTROL INTEGRATION
NOTE: Amazon, Echo, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
PREREQUISITES
Enabling voice control of your Legrand Nuvo Player through devices with Amazon Alexa requires the following:
• A device with Amazon Alexa, such as Amazon Echo, connected to your home network
• A Legrand Nuvo Player or compatible component
• The Amazon Alexa app installed on a mobile device
• An Internet connection
• The Legrand Nuvo Player Contoller app, installed on a mobile device
• An active Samsung ARTIK™ Cloud account
CONNECTING ALEXA TO YOUR LEGRAND NUVO PLAYER
1. Launch the Nuvo Player
controller app on your
mobiledevice.
Select to open the
SETTINGS page.
3. Select Add service. 4. Select Amazon Alexa.
2. Select Music Services.
Player Portfolio Audio System | Product Manual
26
5. Select Register. 6. Sign up for an ARTIK Cloud
account or sign in if you
already have an account.
7. Select Open. 8. Select Open Alexa.
9. Ensure you are in the
Devices section of the
Alexa app and then click
the Menu icon.
a. Search Skills for the Nuvo
Player skill, then select the
correct application.
0. Select Skills & Games.
b. Select Enable To Use.
Player Portfolio Audio System | Product Manual
27
c. Read the instructions
listed under “Before
you continue.” Confirm
your setup, then select
Continue.
d. Use your ARTIK Cloud
username and password to
sign into your account.
Your Samsung ARTIK Cloud
account will link with your
Alexa account.
This completes your Nuvo
Player Alexa skill setup.
e. Close the confirmation
window.
g. Alexa begins discovery of
your available devices
f. Select Discover Devices.
h. After discovery is complete,
select Choose Device to
begin your device setup.
Player Portfolio Audio System | Product Manual
28
SETUP ADDITIONAL MUSIC SERVICE PROVIDERS
To play selections from Music Service Providers (MSPs) other than Amazon Music, link your account for the MSP with
Alexa. Each service has a different setup.
IMP O R TANT: Use the same account information that you use for your MSP app when linking to Alexa using the ARTIK Cloud account. If you do not, you will not be able to
IHEARTRADIO
No account setup is required. Setup iHeartRadio in the Alexa app under Settings > Music & Media > iHeartRadio.
PANDORA
Settings > Music & Media > Pandora
DEEZER
Go to Skills to search for Deezer. Enable the Deezer skill, then link it to your Deezer account.
SIRIUSXM
Go to Skills and search for SiriusXM. Enable the SiriusXM skill, then link it to your SiriusXM account.
TUNEIN
No account needed. TuneIn simply works.
SPOTIFY
Not yet supported.
access the features unique to your MSP account, such as playlists
SUPPORTED ALEXA COMMANDS
Alexa supports many music commands. Below is a sampling of potential commands for Alexa, once connected.
SAMPLE AMAZON ALEXA COMMANDS
• “Alexa, play some music in the Kitchen.”
• “Alexa, play Imagine Dragons from Deezer in the Kitchen.”
• “Alexa, play The Strokes Radio from Pandora in the Kitchen.”
• “Alexa, next.”
• “Alexa, previous.”
• “Alexa, turn it up.”
• “Alexa, volume down.”
• “Alexa, what is currently playing?”
• “Alexa, skip track.”
• “Alexa, play Radio Margaritaville from SiriusXM in the Kitchen.”
Player Portfolio Audio System | Product Manual
29
SPECIFICATIONS
IOS AND ANDROID REQUIREMENTS
• iOS 6 or later required
• Android 2.1x or later required
NVP100XX AMPLIFIER
Input/Output Connectors
Line Input (1) TRS 3.5 mm stereo jack
Line Output (1) TRS 3.5 mm stereo jack
Speaker Output (4) Gold 5-way binding post
USB 2.0 Connection (Type A) One (1)
Local Area Network (LAN) (1) RJ45
Supported Audio Formats
Music File
(USB or over network)
Streaming Music Services Amazon Music (with Alexa use)
Playlist Support WPL
IP Control Apple iTouch
Network Connectivity
LAN (Wired Connection) 10/100Base-T Ethernet
Wireless Connection MIMO, 2 TX + 2 RX Channels
Amplifier Output
Rated Output Power (8 ohm) 40 W (20 W x 2)
Two Channels Driven 20 Hz–20 KHz @ 0.5% distortion
Rated Distortion (1/2 Power) 0.20%
Speaker Impedance 6–8 Ohms
Frequency Response +/-0.5 dB
Damping Factor 50+
Signal-to-Noise Ratio,
Rated Output:
MP3 (.mp3)
WMA (.wma)
AAC (.acc)
Ogg Vorbis (.ogg)
FLAC (.flac)
WAV (.wav)
Deezer
iHeart Radio
Napster
Pandora
SiriusXM
Spotify
TuneIn
M3U
PLS
iTunes
Apple iPhone
Apple iPad
Android Mobile
Android Tablet
Various Third-Party Systems
IEEE 802.11a/b/g/n
94 dBA
®
®
®
Line Output
Output Level 0–2.0 V RMS
Output Impedance 5 Ohms
Signal-to-Noise Ratio, Rated
Output
Line Input
Input Impedance 10 kOhms
Input Overload 2.3 V RMS
Audio Processing
Bass Equalization +/- 12 dB range
Treble Equalization Balance +/- 12 dB range
Regulatory Approvals
Safety cTUVus, CE-LVD
EMC FCC, IC, CE-EMC, C-Tick
Environmental RoHS
Power Requirements
Input Voltage 100–240 VAC, 50/60 Hz
Power Consumption (max) 70 W
Power Consumption
(typical - 1/8 audio power)
Operating Temperature 32˚ F to 104˚ F
Physical Specifications
Unit Size (mm) 42 H x 187 W x 115 D
Unit Size (inch) 1.65 H x 7.36 W x 4.53 D
Unit Weight (kg) 0.613
Unit Weight (pounds) 1.35
Shipping Specifications
Unit Size (mm) 240 D x 230 W x 65.5 H
Unit Size (inch) 9.45 D x 9.06 W x 2.58 H
Unit Weight (kg) 1.30
Unit Weight (pounds) 2.87
Languages Supported
English, French, German, Italian, Portuguese, Spanish
Nuvo reserves the right to change specifications without notice.
88 dBA
13 W
0˚ C to 40˚ C
Player Portfolio Audio System | Product Manual
30
NVP200XX AMPLIFIER
Input/Output Connectors
Line Input (1) TRS 3.5 mm stereo jack
Line Output (1) TRS 3.5 mm stereo jack
Speaker Output (4) Gold 5-way binding post
USB 2.0 Connection (Type A) One (1)
Local Area Network (LAN) (1) RJ45
Supported Audio Formats
Music File
(USB or over network)
Streaming Music Services Amazon Music (with Alexa use)
Playlist Support WPL
IP Control Apple iTouch
Network Connectivity
LAN (Wired Connection) 10/100Base-T Ethernet
Wireless Connection MIMO, 2 TX + 2 RX Channels
Amplifier Output
Rated Output Power (8 Ohm) 120 W (60 W x 2)
Two Channels Driven 20 Hz–20 KHz @ 0.5% distortion
Rated Distortion (1/2 Power) 0.20%
Speaker Impedance 4–8 Ohms
Frequency Response
(20 - 20 KHz)
Damping Factor 65+
Signal-to-Noise Ratio,
Rated Output:
MP3 (.mp3)
WMA (.wma)
AAC (.acc)
Ogg Vorbis (.ogg)
FLAC (.flac)
WAV (.wav)
Deezer
iHeart Radio
Napster
Pandora
SiriusXM
Spotify
TuneIn
M3U
PLS
iTunes
Apple iPhone
Apple iPad
Android Mobile
Android Tablet
Various Third-Party Systems
IEEE 802.11a/b/g/n
+/-0.5 dB
92 dBA
®
®
®
Line Output
Output Level 0–2.0 V RMS
Output Impedance 5 Ohms
Signal-to-Noise Ratio,
Rated Output
Line Input
Input Impedance 10 kOhms
Input Overload 2.3 V RMS
Audio Processing
Bass Equalization +/- 12 dB range
Treble Equalization Balance +/- 12 dB range
Regulatory Approvals
Safety cTUVus, CE-LVD
EMC FCC, IC, CE-EMC, C-Tick
Environmental RoHS
Power Requirements
Input Voltage 100–240 VAC, 50/60 Hz
Power Consumption (max) 150 W
Power Consumption
(typical - 1/8 audio power)
Operating Temperature 32˚ F to 104˚ F
Physical Specifications
Unit Size (mm) 42 H x 229 W x 127 D
Unit Size (inch) 1.65 H x 9.02 W x 5.0 D
Unit Weight (kg) 1.11
Unit Weight (pounds) 2.45
Shipping Specifications
Unit Size (mm) 260 D x 240 W x 65.5 H
Unit Size (inch) 10.24 D x 9.45 W x 2.58 H
Unit Weight (kg) 2.0
Unit Weight (pounds) 4.41
Languages Supported
English, French, German, Italian, Portuguese, Spanish
Nuvo reserves the right to change specifications without notice.
88 dBA
31 W
0˚ C to 40˚ C
Player Portfolio Audio System | Product Manual
31
NVP300XX PREAMPLIFIER
Input/Output Connectors
Line Input (1) TRS 3.5 mini TOSLINK Combo
Line Output (1) TRS 3.5 mini TOSLINK Combo
USB 2.0 Connection (Type A) One (1)
Local Area Network (LAN) (1) RJ45
Supported Audio Formats
Music File
(USB or over network)
Streaming Music Services Amazon Music (with Alexa use)
Playlist Support WPL
IP Control Apple iTouch
Network Connectivity
LAN (Wired Connection) 10/100Base-T Ethernet
Wireless Connection MIMO, 2 TX + 2 RX Channels
Line Output/Input - Digital
Sample Rates 44.1 KHz–192 KHz
Bit Rate 24 B
Signal-to-Noise Ration, rated
output
THD+n <0.0005%
Frequency Response +/-0.1 dB 20 Hz–20 KHz
Line Output - Analog
Output Level 0–2.0 V RMS
Output Impedance 5 Ohms
Signal-to-Noise Ratio,
Rated Output
THD+n <0.005%
Frequency Response +/-0.5 dB 20 Hz–20 KHz
Receiver
Receiver
MP3 (.mp3)
WMA (.wma)
AAC (.acc)
Ogg Vorbis (.ogg)
FLAC (.flac)
WAV (.wav)
Deezer
iHeart Radio
Napster
Pandora
SiriusXM
Spotify
TuneIn
M3U
PLS
iTunes
Apple iPhone
Apple iPad
Android Mobile
Android Tablet
Various Third-Party Systems
IEEE 802.11a/b/g/n
>120 dB SNR
>100dB SNR
®
®
®
Line Input - Analog
Input Impedance 10 kOhms
Input Overload 2.0 V RMS
Signal-to-Noise Ratio,
Rated Output
THD+n <0.005%
Frequency Response +/-0.5 dB 20 Hz–20 KHz
Audio Processing
Bass Equalization +/- 12 dB range
Treble Equalization Balance +/- 12 dB range
Regulatory Approvals
Safety cTUVus, CE-LVD
EMC FCC, IC, CE-EMC, C-Tick
Environmental RoHS
Power Requirements
Input Voltage 100–240 VAC, 50/60 Hz
Power Consumption (max) 10 W
Power Consumption (typical) 5.1 W
Operating Temperature 32˚ F to 104˚ F
Physical Specifications
Unit Size (mm) 38 H x 145.5 W x 90.5 D
Unit Size (inch) 1.5 H x 5.73 W x 3.56 D
Unit Weight (kg) 0.2
Unit Weight (pounds) 0.5
Shipping Specifications
Unit Size (mm) 240 D x 230 W x 65.5 H
Unit Size (inch) 9.45 D x 9.06 W x 2.58 H
Unit Weight (kg) 1.3
Unit Weight (pounds) 2.87
Nuvo reserves the right to change specifications without notice.
>100 dB SNR
0˚ C to 40˚ C
Player Portfolio Audio System | Product Manual
32
REGULATORY COMPLIANCE
This document contains important product safety and regulatory compliance information.
réglementaire du produit. Pour plus de détails concernant les instructions d’utilisation et
Dieses Dokument enthält wichtige Produktinformationen in Bezug auf die Sicherheit und
normativa del prodotto. Per maggiori informazioni sulle istruzioni di installazione visitare
To view more in-depth use and installation instructions please visit our website at
www.legrand.us/nuvo.aspx.
Contact Us:
Technical Support:
3015 Kustom Drive
Hebron, KY 41048
Toll free: +1.800.223.4162
Chat: www.legrand.us/on-q (Click on the icon to open a dialogue box)
Ce document contient des informations importantes sur la sécurité et la conformité
d’installation, veuillez consulter notre site Web à l’adresse http://www.legrand.us/nuvo.
aspx.
Pour nous joindre:
3015 Kustom Drive
Hebron, KY 41048
Numéro sans frais: +1.800.223.4162
Clavardage: www.legrand.us/on-q (Cliquez sur l’icône pour ouvrir une boîte de dialogue)
Toll free: +1.800.223.4162, opt. 3
Email: technicalsupport@nuvotechnologies.com
Soutien technique:
Numéro sans frais: +1.800.223.4162, opt. 3
Courriel: technicalsupport@nuvotechnologies.com
die Erfüllung behördlicher Auflagen. Für weitere Anleitungen zum Gebrauch und zur
Installation besuchen Sie bitte die Webseite www.legrand.us/nuvo.aspx.
Kontakt:
Technischer Kundendienst:
Gebührenfrei: +1.800.223.4162, opt. 3
3015 Kustom Drive
Hebron, KY 41048
Gebührenfrei: +1.800.223.4162
Chat: www.legrand.us/on-q (Klicken Sie auf das Symbol, um ein Dialogfenster zu öffnen)
Il presente documento contiene importanti informazioni sulla sicurezza e la conformità
il sito Web http://www.legrand.us/nuvo.aspx.
Email: technicalsupport@nuvotechnologies.com
Per contattarci:
Assistenza tecnica:
3015 Kustom Drive
Hebron, KY 41048
Numero verde: +1.800.223.4162
Chat: www.legrand.us/on-q ((fare clic sull'icona per aprire la finestra di dialogo)
Numero verde: +1.800.223.4162, est. 3
E-mail: technicalsupport@nuvotechnologies.com
Player Portfolio Audio System | Product Manual
33
Este documento contém informação importante sobre segurança do produto e
conformidade regulatória. Para ver instruções sobre uma utilização mais detalhada e
Este documento contiene información importante relativa al cumplimiento normativo y de
seguridad del producto. Para obtener información más detallada sobre las instrucciones
This audio equipment generates, uses, and can radiate radio-frequency energy. If it is not
installation. However, there is no guarantee that interference will not occur in a particular
If necessary, consult Nuvo Technical Support, refer to the service and support information
available for your Nuvo product, or consult an experienced radio/television technician for
instalação, visite o nosso website em www.legrand.us/nuvo.aspx.
Contacte-nos:
Suporte técnico:
3015 Kustom Drive
Hebron, KY 41048
Chamada gratuita: +1.800.223.4162
Chat: www.legrand.us/on-q (Clique no ícone para abrir a caixa de diálogo)
de uso e instalación, visite nuestra página web en http://www.legrand.us/nuvo.aspx.
Chamada gratuita: +1.800.223.4162, opt. 3
E-mail: technicalsupport@nuvotechnologies.com
Póngase en contacto con nosotros:
Asistencia técnica:
3015 Kustom Drive
Hebron, KY 41048
Teléfono gratuito: +1.800.223.4162
Chat: www.legrand.us/on-q (haga clic en el icono para abrir un cuadro de diálogo)
Teléfono gratuito: +1.800.223.4162, opt. 3
Correo electrónico: technicalsupport@
nuvotechnologies.com
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation. See instructions if interference to radio or television
reception is suspected.
Radio and Television Interference
installed and used properly–that is, in strict accordance with Nuvo's instructions–it may
cause interference with radio and television reception.
This equipment has been tested and found to comply with the limits for a Class B digital
device in accordance with the specification in Part 15 of FCC rules. These specifications
are designed to provide reasonable protection against such interference in a residential
installation.
You can determine whether your audio system is causing interference by turning it off. If
the interference stops, it was probably caused by the computer or one of the peripheral
devices. If your audio system does cause interference to radio or television reception, try
to correct the interference by using one or more of the following measures:
• Tum the television or radio antenna until the interference stops.
• Move the audio device to one side or the other of the television or radio.
• Move the audio device farther away from the television or radio.
• Plug the audio device into an outlet that is on a different circuit from the television
or radio. (That is, make certain the audio device and the television or radio are on
circuits controlled by different circuit breakers or fuses.)
additional suggestions.
Player Portfolio Audio System | Product Manual
34
Important: Changes or modification to this product, not authorized by Nuvo Technologies,
LLC could void the EMC compliance and negate your authority to operate the product.
Region Selection
This product has demonstrated EMC compliance under conditions that included the
use of compliant peripheral devices, USB cables, and Ethernet network cables between
components.
Responsible party (contact for FCC matters only):
Legrand Home Systems Inc., dba Nuvo Technologies
3015 Kustom Drive
Hebron, KY 41048
Exposure to Radio Frequency Energy
The radiated output power of this device is well below the FCC and EU radio frequency
exposure limits. However, this device should be operated with a minimum distance of
at least 20 cm between the Nuvo Player antennas and a person's body, and must not be
collocated or operated in conjunction with any other antenna or transmitter subject to the
conditions of the FCC Grant.
IC Radiation Exposure Statement for Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le present appareil est conforme aux CNR d'lndustrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Les antennes installées doivent être situées de facon à ce que la population ne puisse y
être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce que le
personnel ne puisse approcher à 20 cm ou moins de la position centrale de I' antenne. La
FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d'au moins 20
cm des personnes pendant son functionnement.
Limited by local law regulations, version for North America does not have region selection
option.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Conformément à la réglementation d'lndustrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par lndustrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, ii faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l'etablissement d'une communication satisfaisante.
Player Portfolio Audio System | Product Manual
35
Europe - EU Declaration of Conformity
A copy of the EU Declaration of Conformity is available at:
www.legrand.us/aboutus/sustainability/high-performance-buildings/eco-iconography.aspx
This equipment can be used in the following countries:
AT BG BE CY CZ DK EE FI FR DE GR HU
IE IT LV LT LU MT NL PL PT RO SK SL
ES SE GB IS LI NO CH
Player Portfolio Audio System | Product Manual
36
Important Safety Information (English)
1. Read these instructions.
Informations importantes de sécurité (Français)
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water or moisture or let objects or liquids enter the
product.
6. Install according to manufacturer's instructions.
7. Clean only with a dry, soft cloth.
8. Do not block the ventilation openings.
9. Do not install near heat sources.
10. Protect the power cable and plug from being damaged.
11. Unplug this product during lightning storms and when unused for long periods of
time.
12. Refer all servicing to qualified service personnel.
13. Where the MAINS plug or appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
14. An apparatus with CLASS I construction shall be connected to a MAINS socket outlet
with a protective earthing connection.
1. Lire ces instructions.
2. Conserver ces instructions.
3. Respecter ces avertissements.
4. Suivre toutes les instructions.
5. Ne pas utiliser ce produit à proximité d’eau ou en présence d’humidité, et s’assurer
qu’aucun objet ni liquide ne pénètre dans le produit.
6. Installer cet appareil conformément aux instructions du constructeur.
7. Nettoyer uniquement avec un chiffon doux et sec.
8. Ne pas boucher les ouïes de ventilation de cet appareil.
9. Ne pas installer à proximité de sources de chaleur.
10. Prendre garde de ne pas endommager le cordon ou la prise d'alimentation.
11. Débrancher cet appareil Durant les orages ou les longues périodes de non utilisation.
12. Ne confier sa réparation qu'à du personnel qualifié pour ces produits.
13. Lorsque la fiche d’alimentation ou une multiprise est utilisée comme dispositif de
déconnexion de l’appareil, elle doit rester facilement accessible.
14. Un appareil de CLASSE I doit être raccordé à une prise secteur dotée d’une prise de
terre.
Player Portfolio Audio System | Product Manual
37
Wichtige Sicherheit Auskunft (Deutsch)
1. Lesen Sie diese Anweisungen.
lnformazioni importanti sulla sicurezza (Italiano)
2. Behalten Sie diese Anweisungen.
3. Beachten Sie alle Warnungen.
4. Folgen Sie allen Anweisungen.
5. Verwenden Sie dieses Produkt nicht in Wassernähe oder bei Feuchtigkeit und
vermeiden Sie das Eindringen von Gegenständen oder Flüssigkeiten in das Produkt.
6. lnstallieren Sie immer nach den Anweisungen des Herstellers.
7. Reinigen Sie nur mit einem weichemund trockenem Tuch.
8. Blockieren Sie niemals die Ventilatöriiffnngen.
9. lnstallieren Sie nicht neben Hitzequellen.
10. Schützen Sie das Netzkabel und -stecker vor Beschädigung.
11. Unterbrechen Sie die Netzverbindung während eines Gewitters und derweil sie
längere Zeit unbenutzt bleibt.
12. Leiten Sie alle Servicearbeiten nur an qualifiziertes Personl weiter.
13. Wo der Netzstecker oder ein Mehrfachstecker als Trennvorrichtung verwendet wird,
soll die Trennvorrichtung ohne weiteres benutzbar sein.
14. Eine Vorrichtung in CLASS I-Fertigung sollte an einen Netzstecker mit
Schutzleiteranschluss angeschlossen werden.
1. Leggere queste istruzioni.
2. Conservare queste istruzioni.
3. Osservare tutte le avvertenze.
4. Seguire tutte le istruzioni.
5. Non utilizzare questo prodotto in prossimità di acqua e umidità e impedire la
penetrazione di oggetti o liquidi nel prodotto.
6. lnstallare secondo le istruzioni del produttore.
7. Pulire solo con un panno morbido e asciutto.
8. Non ostruire le aperture di ventilazione.
9. Non installare vicino a fonti di calore.
10. Proteggere ii cavo di alimentazione e la spina da danneggiamenti.
11. Scollegare l'apparecchio durante i temporali e quando inutilizzato per lunghi periodi
di tempo.
12. Per I'assistenza rivolgersi a personale qualificato.
13. La spina di alimentazione o l'accoppiatore devono essere prontamente disponibili e
utilizzabili se utilizzati come dispositivo di disconnessione/spegnimento.
14. Un dispositivo di CLASSE I deve essere collegato a una presa di corrente provvista di
apposita messa a terra.
Player Portfolio Audio System | Product Manual
38
Informações importantes de segurança (Português)
1. Leia estas instruções.
Informatción lmportante de Seguridad (Espanol)
2. Guarde estas instruções.
3. Tenha em atenção todos os avisos.
4. Siga todas as instruções.
5. Não utilize este produto junto de água ou humidade, nem deixe que os objetos ou
líquidos entrem em contacto com o produto.
6. Instale de acordo com as instruções do fabricante.
7. Limpe apenas com um pano seco e macio.
8. Não bloqueie as aberturas de ventilação.
9. Não instale junto de fontes de calor.
10. Proteja o cabo de alimentação e a tomada de quaisquer danos.
11. Desligue este produto durante tempestades com raios e quando não utilizado
durante longos períodos de tempo.
12. Para qualquer tipo de assistência consulte pessoal de assistência qualificado.
13. Se utilizar a tomada de REDE ou acoplador do aparelho como dispositivo para
desligar, este deve manter-se sempre operacional.
14. Um aparelho com construção CLASSE I deve ser ligado à saída da tomada de REDE
com uma ligação de proteção à terra.
1. Leer estas instrucciones.
2. Guardar estas instrucciones.
3. Prestar atención a todas las advertencias.
4. Seguir todas las instrucciones.
5. No utilice este producto cerca del agua ni de la humedad ni permita que objetos o
líquidos entren en el mismo.
6. lnstalar de acuerdo a las instrucciones del fabricante.
7. Limpiar solamente con un paño suave y seco.
8. No bloquear las aperturas de ventilación.
9. No instalar cerca de fuentes de calor.
10. Proteger el cable de alimentación y el enchufe de cualquier posible daño.
11. Desconectar el producto durante tormentas eléctricas y cuando no va a ser utilizado
por largos periodos de tiempo.
12. Para cualquier servicio, contactar al personal de servicio calificado.
13. Si se utiliza el enchufe de red o el conector del aparato principal como dispositivo de
desconexión, este deberá poder accionarse fácilmente.
14. Un aparato con construcción de CLASE I se deberá conectar a una toma de corriente
eléctrica con puesta a tierra.
Player Portfolio Audio System | Product Manual
39
Disposal and Recycling Information
This symbol indicates that your product must be disposed of properly according to
local laws and regulations. When your product reaches its end of life, contact Nuvo
Technologies or your local authorities to learn about recycling options.
European Union Disposal Information
This symbol above means that according to local laws and regulations your product
should be disposed of separately from household waste. When this product reaches its
end of life, take it to a collection point designated by local authorities. Some collection
points accept products for free. The separate collection and recycling of your product at
the time of disposal will help conserve natural resources and ensure that it is recycled in
a manner that protects human health and the environment.
Brasil: Informações sobre descarte e reciclagem
0 símbolo acima indica que este produto e/ou sua bateria não devem ser descartadas
no lixo doméstico. Quando decidir descartar este produto e/ou sua bateria, faça-o de
acordo com as leis e diretrizes ambientais locais. Para informações sobre o programa de
reciclagem da Apple, pontos de coleta e telefone de informações, visile
www.legrand.us/nuvo.aspx.
Player Portfolio Audio System | Product Manual
40
3015 Kustom Drive
Hebron, KY 41048
United States
844.334.8044
www.legrand.us/nuvo
©2018 by Legrand All Rights Reserved. 1507309
Loading...