LEGRAND MyHome F524 Installation Manual

www.legrand.com

Installation manual

F524

Energy Data Logger

003566

Energy Data Logger

Installation manual

Contents

3

Energy Data Logger

Installation manual

1 Description 4

1.1 Warnings and recommendations 4

1.2 Main functions 4

1.3 Legend 5

2 Connection 6

2.1 Wiring diagrams 6

3 Configuration 7

3.1 Procedure with Windows Vista, 7 or 8 operating system 7

3.2 Procedure for Tablet and Smartphone 13

3.3 Troubleshooting 13

4 Appendix 14

4.1 Technical data 14

4

Energy Data Logger

Installation manual

1.1 Warnings and recommendations

Before proceeding with the installation we recommend that you read the content of this manual
very carefully.
The warranty will automatically become void in case of negligence, improper use, and tampering
by unauthorised personnel.

1 Description

1.2 Main functions

The SCS device saves the consumption values in separate energy lines. These lines can be both
electric, by connecting Bus meters with 3 inputs for toroids, item F520, or a load management
central unit, item F521, and non-electric, by connecting pulse counter interfaces, item 3522. The
total number of lines managed cannot exceed 10.
It also allows to check the system loads, displaying the instantaneous consumptions and (when
they are deactivated by a load control unit following an overload), force their reactivation for a
given time.

5

Energy Data Logger

Installation manual

4

2

1

2

3

1 - User interface LED: see table

2 - MicroSD memory card slot (optional)

3 - Connection to the SCS BUS

4 - Ethernet connection

5 - Reset key:

– press and hold for 10 seconds to restart the Energy Data Logger;
– press and hold for 20 seconds to restart the Energy Data Logger , and set the dynamic
selection of the IP address.

1.3 Legend

User interface LEDs table

Red LED

flashing slowly and regularly:

no network found;
waiting for an address to be assigned.

Green LED

flashing slowly and regularly:

device waiting to be configured.

Green LED

flashing quickly and regularly:

time on the device not configured.

Green LED

flashing slowly and irregularly:

device working and configured.

Red-green LED

flashing quickly:

IP or microSD configuration error.
Reset, check the configuration, and the microSD
memory card model.

1
5

5

3