Legrand Access 5000 User Manual

5007C-2 Deep Device Plate

Installation Instructions

Deep devices such as Ground Fault Circuit Interrupters, Surge Suppressor Outlets and/or the Communications
Activation Series inserts, may be utilized in the Wiremold Access™5000 Raceway System using this Deep Device
Plate. A typical installation is illustrated in Figure 1.

Twist off the two Spacers attached to the 5007C Device Bracket (see Figure 3). Snap the Device Mounting
Bracket, 5007C into the base channel provided as in Figure 2. Assemble the device to the Device Bracket utilizing
the Spacers as shown in Figure 1. Assemble the Deep Device Plate to the Raceway Base. Engage the hooks
located next to the double window opening, to the lower (large) lip of the Raceway Base. Rotate the Device Plate
toward the wall snapping it into place (see Figure 4). Assemble the desired Face Plate as shown in Figure 1.

Trim Cover 5000T

Raceway
Base
5000B

Device Bracket
w/Spacers 5007C

Raceway Cover 5000C

Deep Device
Plate 5007C-2

5507 Series
Face Plates

St’d Blank
Insert CASBLNK

CAS Series
Inserts

Figure 1

5007C-2

Figure 2

Figure 4

Figure 3

Finished Assembly

Base 5000B

Device Bracket 5007C

Deep
Device
Plate

Hook
to Lip
of Base

Device Bracket 5007C

Spacer

The Wiremold Company

60 Woodlawn Street
West Hartford, CT 06133-2500

40933 695

©1995 The Wiremold Company