Legrand 30TP User Manual

INSTALLATION INSTRUCTIONS

Wiremold Electrical Systems conform to and should be properly grounded in compliance with requirements of the current National Code or codes administered by local authorities.

All electrical products may represent a possible shock or fire hazard if improperly installed or used. Wiremold electrical products are UL listed, made for interior use in dry locations only and should be installed in conformance with current local and/or the National Electrical Code.

30TP-Series

Add-Ons For Tele-Power

Poles

Components Included: 1 Device Plate/1 Mounting Bracket/1 Cover Section

Add-On Covers

Communication Cables- No. of Pairs

No. of Cables

30% Fill

60% Fill

Communication Cables- No. of Pairs

No. of Cables

30% Fill

60% Fill

Wire Type

THHN,THWN

Size AWG

No. 12 No. 10

30TP-4

Communication Capacities

30TP-2

Communication Capacities

Power Capacities

Wire Type

THHN,THWN

Size AWG

No. 12 No. 10

Power Capacities*

Communications

Plate

30TC-CVR

Cover w/Bezel

Installed

30TC-3S2

One Gang

30TP-C

Rectangular

30TP-L

Single

(1.59 [40.39mm]

Diameter)

30TP-J

Single

(1.40 [35.56mm]

Diameter)

30TP-A

Duplex 30TP-B

*With surge/GFCI devices

30TP-4 30TP-2

Figure 1

1.Remove power cover for electrical applications. Remove communication cover for data/phone applications (Fig. 1).

2.Screw on mounting bracket.

3.Install device per NEC recognized wiring methods.

4.Screw on plate, snap on cover.

Power Cover

Communication Cover

Communication

Cover

The Wiremold Company

U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 850 Gartshore Street • Fergus, Ontario N1M 2W8 1-800-741-7957 • FAX 519-843-5980

40777R1 901