Legrand 3000 User Manual
4011/15RI
4011DRI
4015DRI
4017/18RI
INSTALLATION
INSTRUCTIONS
Wiremold Electrical Systems conform to and should be installed and properly
grounded in compliance with requirements of the current National Electrical
Code, Canadian Electrical Code or codes administered by local authorities.
All electrical products may represent possible shock or fire hazard if improperly
installed or used. Wiremold electrical products are UL listed. Made for interior
use only and should be installed in conformance with current local and/or the
National Electrical Code.
4011 Flat Elbow 40% Fill 4017& 4018 Elbows 40% Fill 4015D & 4015 Tee Fitting 40% Fill
Cable/Wire Size O.D. 4011DRI Divided 4011/15RI Undivded 4017/18RI Divided 4017/18RI Undivded 4015DRI Divided 4011/15RI Undivded
Power Wiring 2 Awg 0.384 11 21 6 11 6 16
THHN/THWN 4 Awg 0.324 15 30 8 15 9 23
6 Awg 0.254 24 48 13 25 14 37
8 Awg 0.216 34 67 18 35 20 51
10 Awg 0.164 68 136 36 71 40 104
12 Awg 0.130 107 214 56 112 63 163
14 Awg 0.111 145 288 75 151 85 220
Unshielded Cat. 5 UTP 0.22 33 66 17 34 19 50
Twisted Pair Cat. 3 UTP 0.19 44 88 23 46 26 67
2 Pair 0.14 81 162 42 85 48 124
Telephone 3 Pair 0.15 71 141 37 74 42 108
4 Pair 0.19 44 88 23 46 26 67
25 Pair 0.41 9 19 5 10 6 14
RG58/U 0.195 42 84 22 44 25 64
Coaxial RG59/U 0.242 27 54 14 28 16 41
RG62/U 0.242 27 54 14 28 16 41
RG6/U 0.27 22 44 11 23 13 33
TwinAxial 100 Ohm 0.33 15 29 8 15 9 22
Shielded Type 1 STP 0.39 10 21 5 11 6 16
Twisted Pair Type 2 STP 0.465 7 15 4 8 4 11
Type 3 STP 0.245 27 53 14 28 16 40
Fiber ZipCord 0.11 132 263 69 137 78 201
Fiber Optic Round Fiber 2 Strand 0.18 49 98 26 51 29 75
Round Fiber 4 Strand 0.19 44 88 23 46 26 67
Round Fiber 6 Strand 0.21 36 72 19 38 21 55
Raceway Wire and Cable Fill Capacity When Using 4000 Radius Inserts
4011/15RI when used with 4011 undivided elbow. 4011/15RI when used with 4015 undivided tee.
4011/15RI
Typical Installations
4011
4015
4011/15RI
Side “A” face up.
Side “B” face up.
4011DRI when used with 4011 for divided elbow.
4011/15RI
41308R1 400© Copyright 2000 The Wiremold Company All Rights Reserved
The Wiremold Company
60 Woodlawn Street
West Hartford, CT 06110
Tel 1-800-621-0049 • Fax 860-232-2062
4017/18RI when used with 4017 or 4018 undivided elbows.
4017
Typical Installations
4017/18RI
4015DRI when used with 4015D divided tee fitting.
4015D
4011/15RI
(Side “B” face up.)
4017/18RI
4017/18RI
4017/18RI
4017
4018
G4000D
G4000D
4015DRI
4018
4017/18RI
4017/18RI when used with 4017 or 4018 elbow for divided raceway.
Loading...