LGB-125
Select draw-off: ❏ 1½" ❏ 2" ❏ 3"
With: ❏ Compression ❏ Ball type fitting
Select voltage: ❏ 120V ❏ 208V ❏ 240V
Select gas: ❏ Natural ❏ LP ❏ Other
♦♦
♦♦
♦
The Legion 316L Kettle System
◊ 316L stainless liner
◊ 316L stainless draw-off tube and welds
◊ 316 stainless 1 1/2" compression draw-off valve
♦ 304L stainless kettle jacket
♦ Kettle protection system
◊ Thermostat temperature control, 150°F - 260°F
◊ Pressure relief valve
◊ Air eliminator valve
◊ Pressure gauge
◊ Jacket-water fill and sight glass
◊ Automatic low water cut off and indicator light
◊ Safety pilot control
♦
Full body insulation between kettle jacket and outer casing
♦ Electronic ignition, 120V standard
♦ 304 stainless outer casing seam welded to radius lip
♦ 304 stainless, seam welded control console
♦ 304 stainless, one piece, domed cover actuator-assisted
on 50 - 125 gallon
♦ Perforated disc strainer, 1/4" holes
♦ Adjustable bullet feet
STANDARD FEATURES
❑ Single or double fill faucet with bracket &
12” or 18” swing nozzle
❑ 48" flexible spray hose assembly (vinyl or
stainless) for dual or single fill faucet
❑ Faucet bracket
❑ Automatic water filling meter
(
Call for information regarding additional faucet
options)
❑ Single basket insert, 15 - 30 gallon
❑ Tri-basket insert
❑ Nylon bag insert with spreader ring
❑ Lift-off cover
❑ 1 piece actuator-assisted cover, 20 - 40
gallon
❑ 2 piece hinged cover
❑ Adjustable flanged feet
❑ Pressure switch
❑ Electric indicating timer with buzzer
❑ Draw-off drain hose
❑ Measuring strip
❑ Perforated disk strainer, 1/8" holes
❑ Kettle care kit
❑ Kettle tools (see specification sheet)
❑ 1/2" gas quick disconnect
❑ Flexible gas hose, 1/2" x 60"
❑ Higher voltage electronic ignition
❑ Mixer/Agitator, 2 speed
Prison/Security Options:
❑ Fasteners
(screws & nuts)
❑ Nut driver tool
❑ Draw-off nut driver tool
❑ Screw driver tool
❑ Lockable control cover
❑ Lockable lid
❑ Draw-off protection
MODELS AND CAPACITIES
OPTIONAL FEATURES AND ACCESSORIES
See price list for supplemental information regarding options
LGB-20
LGB-25
LGB-30
LGB-40
LGB-50
LGB-60
LGB-80
LGB-100 100 gal. (379 l.)
80 gal. (303 l.)
(227 l.)
50 gal. (151 l.)
40 gal. (114 l.)
30 gal. (114 l.)
25 gal. (95 l.)
20 gal. (76 l.)
60 gal.
SELF-CONTAINED
KETTLE
Gas-Fired, 2/3 Jacket
Insulated for Safety™
Deep Drawn Construction
Floor Mounted, Made in USA
Model
LGB
LGB-125 125 gal. (474 l.)
Low-Rim™ Model LGB-40F and Standard Model LGB-40
Both models are shown to give a comparison of rim height & width
See Model LGB-F specification sheet for details on the
Low-Rim™ Series
Legion equipment is built to comply with applicable standards for manufacturers. Approval agencies may include ASME, NSF, UL, ETL, AGA, CSA, CGA, and others.
Legion reserves the right of design improvement or modification as warranted.
Loading...