Lefroy Brooks M1-2200, M1-2207, M1-2202, M1-2204, M1-2209 Installation Instructions Manual
...
INSTALLATION INSTRUCTIONS
M1-2200
CROSS HANDLE 5-HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH DECK DIVERTER TRIM ONLY,
TO SUIT R1-4006 ROUGH
M1-2202
LEVER 5-HOLE BATH SET & PULL-OUT BLACK HAND SHOWER WITH CROSS HANDLE DECK DIVERTER - TRIM ONLY,
TO SUIT R1-4007 ROUGH
M1-2204
CROSS HANDLE 5-HOLE BATH SET & PULL-OUT METAL-FINISH HAND SHOWER WITH DECK DIVERTER TRIM ONLY,
TO SUIT R1-4006 ROUGH
M1-2206
LEVER 5-HOLE BATH SET & PULL-OUT METAL-FINISH HAND SHOWER WITH CROSS HANDLE DECK DIVERTER - TRIM ONLY,
TO SUIT R1-4007 ROUGH
M1-2207
CROSS HANDLE 5-HOLE BATH SET & PULL-OUT WHITE HAND SHOWER WITH DECK DIVERTER TRIM ONLY,
TO SUIT R1-4006 ROUGH
M1-2209
LEVER 5-HOLE BATH SET & PULL-OUT WHITE HAND SHOWER WITH CROSS HANDLE DECK DIVERTER - TRIM ONLY,
TO SUIT R1-4007 ROUGH
M1-2200 M1-2204
M1-2207
M1-2202
M1-2206
M1-2209
Dimensions in Inches (& Millimetres)
M1-2200
M1-2204
M1-2207
3 5/16"
(84.4mm)
2 11/16"
(68mm)
2 1/16"
(52mm)
9 15/16"
(252mm)
2-Ø2 3/8"
(2-Ø60mm)
H3 1/16"
(H77mm)
3 1/2"
(88.4mm)
3 5/16"
Ø2 3/8"
(Ø60mm)
(84.4mm)
Ø2 3/8"
(Ø60mm)
7 7/8"
(200.4mm)
2 11/16"
(67.8mm)
2"
(51mm)
9 1/16"
(230mm)
M1-2202
M1-2206
M1-2209
9 15/16"
(252mm)
3 1/2"
3 5/16"
(84.4mm)
2-Ø2 3/8"
(52mm)
2 1/16"
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
(2-Ø60mm)
2
(88.4mm)
7 7/8"
Ø2 3/8"Ø2 3/8"
(Ø60mm)(Ø60mm)
2 11/16"
(67.8mm)
(200.4mm)
2"
(51mm)
9 1/16"
(230mm)
11 1/4"
(286mm)
What you need to know
Tools: Maintenance
Adjustable Wrench
Groove Joint Pliers
Hacksaw
Phillips Screwdriver
Pipe Tape
Spatula
Spirit Level
Safety Tips
If you are soldering during faucet installation,
remove cartridges, seats, gaskets and washers
prior to applying flame, otherwise you will void
the warranty.
Cover drain openings to avoid losing small parts.
When cutting or soldering pipe, use safety glasses
to protect your eyes.
Your new bathroom faucet is designed for years
of trouble-free performance.
Keep it looking new by cleaning it periodically with
a soft cloth. Avoid abrasive cleaners, wire wool and
harsh chemicals as these will dull the finish and
void your warranty.
Important Points
Prior to beginning installation. turn off the cold and
hot water lines and open the old faucet to release
built-up pressure.
Overtightening nuts may cause damage.
Wrap all threaded connections with pipe tape
available at your local plumbing supply store.
Always wrap in a clockwise direction. The fittings
should be installed by a state-licenced plumber.
Things You May Need
Correct installation may vary depending on previous faucet installation. All necessary supplies required for
faucet installation are not included, but may be found where plumbing supplies are sold. It is suggested that
IAPMO and/or CSA approved plumbing supplies are used during installation.
Standards Flow Rate
IAPMO/cUPC Listed
Meets A112.18.1
10
5
0
20 40 60 80PSI
3
Loading...