Leeson E100357.00 Product Information Packet

Download

Page 1

PRODUCT INFORMATION PACKET

Model No: E100357.00

Catalog No: E100357.00

0.75 HP General Purpose Motor, 1 phase, 3600 RPM, 115/230 V, 56C Frame, ODP Single Phase ODP Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 3

Page 2

Product Information Packet: Model No: E100357.00, Catalog No:E100357.00 0.75 HP General Purpose Motor, 1 phase, 3600 RPM, 115/230 V, 56C Frame, ODP

Nameplate Specifications

Output HP 0.75 Hp Output KW 0.56 kW Frequency 60 Hz Voltage 115/230 V Current 7.2/3.6 A Speed 3450 rpm Service Factor 1.25 Phase 1 Efficiency 76.2 % Power Factor 89.2 Duty Continuous Insulation Class B Design Code N KVA Code K Frame S56C Enclosure Drip Proof Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 22

Technical Specifications

Electrical Type Capacitor Start Capacitor Run Starting Method Across The Line Poles 2 Rotation Selective Counterclockwise Resistance Main 0 Ohms Mounting Round Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type NEMA 56 Overall Length 11.49 in Frame Length 7.50 in Shaft Diameter 0.625 in Shaft Extension 2.06 in Assembly/Box Mounting F1 Only

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 3

Page 3

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

SS404121

12/03/2014

D H. ADIKE 11/15/2018

ECO-0157933 JD 12/6/2018

OUTLINE CONVERSION PROJECT

OUTLINE

SS404120

S56 FRAME ROUND MOUNT - DRIP PROOF

DASH NO. "C" "AD"

550 9.49[241.04] 6.75[171.45] 575 9.74[247.39] 7.00[177.80] 600 9.99[253.74] 7.25[184.15] 625 10.24[260.09] 7.50[190.50] 650 10.49[266.44] 7.75[196.85] 675 10.74[272.79] 8.00[203.20] 700 10.99[279.14] 8.25[209.55] 725 11.24[285.49] 8.50[215.90] 750 11.49[291.84] 8.75[222.25]

.6250 .6245

15.8737

15.8610

"C" .06

[ 1.52]

1.94

49.37

2.06

52.42

.12

3.05 .07

1.74

"AD"

4.500

4.497

114.300

114.224

1.875

47.625

1.41

35.81 FULL

DEPTH

1/2-14 NPT CONDUIT HOLE (PLUGGED)

.19[4.82] SQ x

1.38[35.05] KEY

.004 H

.002 H