LEADER LV5382 User Manual

MONITOR

WAVEFORM

LV5382 MULTI SDI MONITOR

With the Versatility of an HDMI Connector

The LV5382 is a portable waveform monitor that supports SDI and HDMI*1 signals. The LV5382 has simultaneous
HD-SDI dual input display features and supports HDMI frame-packing, side-by-side, and top-and-bottom formats.

A battery option is also available. Thanks to these features, the LV5382 is incredible useful at 3D lming locations.

MAIN FEATURES:

The LV5382 has two SDI input connectors, two

reclocked SDI signal output connectors, one HDMI
input connector, and one HDMI output connector.

The HDMI output connector can actively transmit

an HDMI input signal or output an HDMI signal that
has been converted from an SDI signal.

8.4-inch XGA TFT LCD monitor (1,024 x 768) for
high quality picture displays.

It can display waveform, vector, image, audio, status

and 5-bar in various combinations or individually.

The 5-bar display can monitor R-G-B and composite

gamut levels.

*1: HDCP not supported
*2: This feature is not available for HDMI signals.

Standard-equipped with CINELITE® II and

CINELITE® Advanced.

Screen Capture feature allows to capture and store

the display as a still-image data. Additionally it can

be saved as bitmap les to USB memory, which

makes possible to view the data on a PC.

The LV5382 can receive a tri-level sync signal or an

NTSC/PAL black burst signal as its external sync
signal and then display video signal waveforms
with this sync signal as its reference.

Stores up to 30 presets accessible from the front

panel.

*2

*2

MAIN FEATURES (cont.):

The LV5382 always keeps a backup of the current

settings. When the LV5382 is restarted, it can be
used with the same settings that were in use before
it was turned off.

IDs can be assigned to input signals.
The LV5382 can deliver the embedded audio of

an SDI signal or HDMI signal in stereo through the
headphone output jack.

AVAILABLE OPTIONS:

3D ASSIST - OP04: 3D video signals can be evaluated by applying the video signals for the left eye to

channel A and the video signal for the right eye to channel B. The available picture display formats are
anaglyph, convergence, overlay, and wipe.

REMOTE AND TALLY - OP72: The addition of the remote and tally option enables the LV5382 to load

presets and display tallies according to the signals that it receives through the rear-panel remote control
connector. This allows the LV5382 to be linked to a switcher or other device.

BATTERY MOUNT IDX - OP73: To mount an IDX battery.
BATTERY MOUNT ANTON - OP74: To mount an Anton Bauer battery.

DIMENSIONS (W x H x D): 8 1/2” x 6 7/8” x 3 3/8” (215mm x 176mm x 85mm)

WEIGHT: 2.1 Kg (4.6 lbs)

POWER REQUIREMENTS:

Voltage:

10 to 18 VDC

Power Consumption: 40 W max.

LV5382 Rear Panel

LEADER INSTRUMENTS CORPORATION

11095 Knott Avenue, Suite B - Cypress, CA 90630

[e-mail] www.LeaderAmerica.com

Revision 01/13