LEADER LG3804 User Manual
DVB-T SIGNAL GENERATOR
LG 3804
OP70:
Moving Picture Option.
LG 3804 DVB-T Signal Generator
Ideal for The Production, Test and Alignment of DVB-T
Compliant Tuners and Receivers/STBs.
The LG 3804 DVB-T Signal Generator, conforms to DVB-T
(digital terrestrial TV in Europe System) standards, features a
channel coding, modulation, C/N generator, and up converter
in a single package. Consequently, the modulated signal
covering VHF and UHF channels can be output.
Providing pseudo random signal (PN) and BER counter can
perform BER measurement of receivers and tuners with a
single unit.
In addition to the internal TS signal, the external MPEG-2 TS
can be used to evaluate video and sound quality. Such
powerful features are ideal for total evaluation of a reception
system.
LG 3804 REAR PANEL
FEATURES
• All-In-One
This instrument features the signal generator capability
and BER measurement capability in a single package.
The BER function is used to measure the front-end
section; the broadcasting MPEG-2 TS function is used to
visually check entire system.
Also, such features are ideal for the production line of
STB and tuners.
• Arbitrary Modulation System Settings
The modulation system can be arbitrary set via the front
panel controls. The QVGA LCD graphically displays the
setting conditions.
• Encoding/Modulation MPEG-2 TS in Real Time
The MPEG-2 TS applied from the DVB-ASI or DVB-SPI
connector can be encoded/modulated in real time.
• 100 Preset Conditions
Up to 100 preset conditions can be stored in the memory.
Since the stored contents can be categorized into 10
groups, the preset mode is convenient for inspection
applications.
• Various Options
Moving Picture Option (Factory option)
With the HDD and DVD-ROM installed, a stream including
HDTV content (i.e., requires large storage area) and
long-time TS can be played back from the HDD.
42
43
LG 3803/3804/3803-01 SPECIFICATIONS
Broadcasting System
Terrestrial Digtal TV Broadcast
Cable TV Broadcast
Modulation System
Band Width
Coding Rate
FFT Mode
Guard Interval
RF Signal Generator
Frequency Range
Output Range
Input/Output Signal Sources
Pseudo Random Signal
Still Picture Pattern
Sound(Tone)
Screen Size
DVB-ASI Input
Input Connector
Input Level
Baud Rate
DVB-SPI Input
Input Connector/Impedance
Input Level
Input Format
ASI, SPI Input Specification
Input Packet Format
Applicable Stream
FREQ STD Input/Output
Input Connector
Input Level
Input Frequency
4-Line Serial BER Input
Input Connector
Input Level
Input Signal
BER Counter Section
Input Section
Packet Length
Input Connector
GO/NO-GO Function
Threshold Settings
GO/NO-GO Indication
C/N Generator Section
C/N Variable Range
On/Off
External Interface
Memory Card Interface
ETHER Interface
USB Interface
GP-IB
Display Panel
LCD
Environmental Conditions
Spec-Guaranteed Temperature
Spec-Guaranteed Humidity
Power Requirements
Voltage
Power Consumption
Dimensions
Weight
*1 : Picture pattern and sizes are subject to without notice.
Model
LG 3803 LG 3804
ATSC A/53B
ITU-T J.83 annex B
8VSB/ 64QAM/ 256QAM
--
--
--
--
50 to 900MHz
-100 to + 13dBm (into 50Ω)
PN15, PN23
Color bar, ramp, monoscope
1kHz(LR), 400Hz(LR), 1kHz(L) +400Hz(R)
1080i/ 720p/ 480p/
480i(16:9)/ 480i(4:3)
BNC (Impedance; 75Ω)
0.8Vp-p
270Mbps
25-pin D-sub/100Ω differential input
LVDS
MPEG-2 TS or BER count input
188, 204 byte
MPEG-2 TS (ISO/IEC 13818-1)
BNC (Impedance; 50Ω)
0.8 Vp-p
10 MHz
BNC
LVTTL 3.3V
CLOCK, DATA, SYNC, VALID
188,204 byte
DVB-SPI connector, Serial Input Connector
Upper and Lower limits of BER
Displays GO/NO-GO on the screen
0 to 35 dB (Setting Resolution: 0.1dB)
Selectable
Compact flash card (CFA TYPE-I)
10BASE-T, 100BASE-TX
USB1.1
24-pin, ANSI/IEEE Std 488.1 - 1987
5.7” QVGA (320 x 240) TFT Color LCD
10 to 35 °C
≤85 %RH (without condensation)
90 to 250 VAC, 50/60 Hz
140W max.
16.8(W)×5.9(H)×17.9(D) inch
Approx 30.9 Lbs
DVB-T
-QPSK/16QAM/64QAM,
hierarchical
6MHz/7MHz/8MHz
1/2, 2/3, 3/4, 5/6, 7/8
2k, 8k
1/4, 1/8, 1/16, 1/32
30 to 960 MHz
(*1)
Modulator Section
Model
Standard
Modulation System
Symbol Rate
RF Signal Generator
Frequency Range
Output Range
Input/Output Signal Sources
Pseudo Random Signal
BER Serial Input
Input Connector
Input Level
BER Counter Section
Input Connector
GO/NO-GO Function
Threshold Settings
GO/NO-GO Indication
C/N Generator Section
C/N Variable Range
Setting Resolution
On/Off
External Interface
Memory Card Interface
ETHER Interface
Display Panel
Environmental Conditions
Spec-Guaranteed Temperature
Spec-Guaranteed Humidity
Power Requirements
Voltage
Power Consumption
Dimensions
Weight
LG 3803-01
ANSI/SCTE 55-1, 55-2
QPSK
1.024Msps (55-1; Alternative)
0.772Msps (55-2:Grade A)
1.544Msps (55-2;Grade B)
70 to 130MHz
-100 to + 13dBm (into 50Ω)
PN15, PN23
BNC (Impedance; 75Ω)
LVTTL 3.3V
Serial Input Connector
Upper and Lower limits of BER
Displays GO/NO-GO on the screen
0 to 20dB
0.1dB
Selectable
Compact flash card (CFA TYPE-I)
10BASE-T, 100BASE-TX
10 to 35 °C
≤85 %RH (without condensation)
90 to 250 VAC, 50/60 Hz
40W max.
16.8(w)×3.9(H)×17.9(D) inch
Approx 15.5 Lbs
Loading...