Leader 5861V, 5860V Datasheet

5860V(NTSC) 5861V(PAL)

(

5861V

CRT Type Accelerating Potential Effective Display Area Beam Rotator Input Section Input Connector Input Impedance

Maximum Input Full Scale Graticule Full Scale SYNC VIDEO Deflection Accuracy 1 V Full-scale Range

4 V Full-scale Range

WAVEFORM MONITOR

5860V REAR PANEL

Measures Composite Video Signal Amplitude,

Timing, and Frequency Response

Frequency Characteristics FLAT

LUM

IRE

CHROMA

DIF GAIN

DIF'D STEP

Transient Response

Sag (Vertical window signal)

Variable Range

1V Full-scale Range 4V Full-scale Range DC Restoration

PAL

Model

)

5860V (NTSC

5861V 5860V

150 mm rectangular, internal graticule with scale illumination 12 kV 80 (V) x 100 (H) mm Adjustable from the front panel

A and B on the rear panel (loop-through, BNC connector) 1 Vp-p full scale range: 15 kΩ, 50 pF 4 Vp-p full scale range: 60 kΩ, 50 pF ±5 V (DC+peak AC), AC coupled

1.0 scale

0.3 scale

0.7 scale

Within ±2% of 1.0 scale at 1V input Within ±4% of 1.0 scale at 4 V input

25 Hz to 3.6 MHz ±2%, 3.6 MHz to 5 MHz+2%,

-5% at 50 kHz reference More than 35 dB of attenuation at 4.43 Mz

4.43 MHz bandpass filter Response: Within ±2% at filter FLAT

4.43 MHz bandpass filter 3 to 5.5 times of CHROMA amplitude For measuring the linearity of luminance 450 kHz bandpass filter Response at filter "FLAT" 400 kHz: Within ±2% 500 kHz: Within +0, -20% 14 kHz, 2 MHz: Within -90%

4.43 MHz (5861V), 3.58 MHz (5860V): -99% ±1.5% or less in

overshoot, preshoot, and ringing using the sin2 pulse & bar signal at FLAT with 1V full scale range. 2% or less Input voltage of 1.0 full scale

0.25V or less to 1V 1V or less to 4V Clamped at the back porch

)

SPECIFICATIONS

140 IRE 40 IRE 100 IRE

Within ±2% of 140 IRE at 1 V input Within ±4% of 140 IRE at 4 V input

Conforms to IRE STD23S-1 (1958); more than 22 dB of attenuation at 4.43 MHz

3.58 MHz bandpass filter

±2 IRE or less in overshoot, preshoot, and ringing using the sin2 pulse & bar signal at FLAT with 1 V full

scale range.

Input voltage of 140 IRE full scale

The 5860V and 5861V Waveform Monitors offer quick and accurate monitoring of amplitude, time and frequency response characteristics of composite TV signals. The waveform monitor is equipped with sweep modes and trigger functions that are optimized for monitoring video signals. For example, sweep modes 2H, 1H, 1µs/div, 2V, 1V, and 2V MAG can be selected for the horizontal axis. Optimized filters such as FLAT, IRE (5860V), LUM (5861V), CHROMA, DIF GAIN and DIF'D STEP can be switched in to observe various characteristics of video signals. Furthe r more, a line sele ctor is provided for observing VITS and VIR signals that are inserted during the vertical blanking period. The blanking output connector allows for blanking other periods than the lines selected by the line selector. Loop-through connectors are provided for A and B and external reference inputs. A video output follows the selected A or B input. Other functions necessary for video signal monitoring are provided.

FEATURES

•

The 5860V is compatible with the NTSC M system, and the 5861V is compatible with PAL B, C, D, G, H, I, and K systems.

•

Diff erentiated-s tep f ilters easily displ ay the diffe rential of st a i rcase signals to measure the linearity of lumina n c e components for transmission systems.

•

Buil t-in line sele ctor functio n for monitor ing VITS and VIR signals, a blanking output and a video output.

•

Horizontal sweep mode selection from 1H, 2H, 1µs/div, 1V, 2V and 2V MAG.

The frequency respons e of the verti cal axis is s wit chable

between FLAT, IRE (5860V), LUM (5861V), CHROMA, DIF GAIN, and DIF'D STEP filters.

•

K factor scale is provided onscreen for checking frequency characteristics.

Video Output Output Connector Output Voltage Output Impedance

Sweep 1H Sweep 2H Sweep 1 µs/div 1V Sweep 2V Sweep 2V MAG Sweep Linearity RGB/YRGB Display Staircase Maximum Input Voltage Sweep

Sweep Line Length

Composite to YRGB Control Signal RGB and YRGB Input RGB and YRGB Input External Synchronization Input Connector Input Impedance Input Sensitivity

Maximum Input Voltage Line Selector Display Line

Blanking Output Output Connector Voltage Level

Calibration Waveform Amplitude Frequency Environmental Conditions Operating Temperature Power Requirements Dimensions and Weight

Supplied Accessories

Model

Frequency Characteristics

5861V 5860V

BNC connector on the rear panel 1V ±15% at full scale input 75 Ω ±10% 25 Hz to 5 MHz ±5%

Display of 1H waveform Display of 2H waveform 10 times magnification of 2H sweep, 1µs/div ±3% Display of 1V waveform Display of 2V waveform Approx. 20 times magnification of 2V sweep ±3% RGB is standard. (YRGB is optional.) 10 V ±15%/9 div ±12V (DC+peak AC) 1H display at 2H sweep 1V display at 2V sweep RGB: 30%×3 or composite display YRGB: 22%×4 of composite display Remote control from external or internal control signal 12 to 15 V (negative or positive), 15 mA 9-pin MT socket on the rear panel 9-pin D-sub connector (option)

2 terminals, BNC, loop-through type on the rear panel

15 k

0.143 to 5 Vp-p (Level of sync signal in composite video signal) ±8 Vp-p

13 to 22 and 325 to 334 lines

BNC connector on the rear panel 0 V: selected by line selector

-2V: for other duration

Square waveform 1 Vp-p ±1% 32 kHz

0 to 40°C 100, 120, 200, 240 VAC, 50/60 Hz, 45 VA 215 (W) x 132 (H) x 429 (D) mm, 7.4 kg 8 1/2(W) x 5 1/4(H) x 16 3/4(D) in., 16.3 lbs.

Scale illumination lamp 9-pin MT plug

Cover/lnlet stopper Screw, rack mounting(inch size) Power cord Instruction manual

.........................................................

.......................................................................

...............................................................

...........................................................................

................................................................

14 to 21 lines of first and second fields

..........................................

5 1

1 2 1 1