LBL Lighting Little Lulu Flush Mount User Manual
Installation Instructions for
980LLULUC
Little Lulu Ceiling
Ceiling
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
FM707_-LED
1.0
Install the Fixture
1A
MOUNTING
PLATE
1 1
#8-32 SCREW #8-32 SCREW
1
Mount the mounting plate to the electrical box with
the two #8-32 screws.
ELECTRICAL BOX
1B
2
3
2
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
3
Connect the white fixture wire to the neutral power line
wire with a wire nut.
4
4
Connect the black fixture wire to the hot power line
wire with a wire nut.
1
Install the Crystals
1C
CAP NUTS
5
Mount the fixture base to the ceiling by installing it
onto the mounting plate and securing it tightly with
the two cap nuts.
Note: For the installation of the crystals, the
designer installing the crystals in suchrecommends
a way that the location of each kind of crystal varies.
The crystals may be installed in any configuration as
desired.
2A
1
HOOK
CABLE LOOP
1
Install each crystal by placing the looped end of the
cable onto each individual hook.
2
Loading...