Installation Instructions for
Straight LED-Illuminated Monorail
980MRLRAIL-LED
& Fiber Optic Cable
LED-Illuminated Monorail
GP I :ENERAL RODUCT NFORMATION
Standard LED-Illuminated Monorail bends horizontally to a radius
as small as 12". It cannot be bent vertically in the field.
Bend the LED-Illuminated Monorail
1A1A
RAIL-ST-_-LED & LEDMRLFIBER
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A1B
1.1
LED-ILLUMINATED
MONORAIL
CIRCULAR
PLYWOOD
1
Determine the radius of the curve or circle.
2
On a piece of plywood draw the curved pattern.
3
Cut out the curved pattern from the plywood.
4
Make sure that cut out plywood is secured in place.
5
Hold on edge of the LED-Illuminated Monorail against the
LED-ILLUMINATED
MONORAIL
CIRCULAR
PLYWOOD
6
Start bending the rest of the LED-Illuminated Monorail against
the circular plywood until the desired curve or circle is
NOTE:Avoid straightening the bent Monorail which
may cause the rails to separate from the insulator.
1
Connect the LED-Illuminated
Insert the Fiber Optic Cable into the
Monorail Sections
LED-Illuminated Monorail
1A2A 1A3A
1.5 MM ALLEN
LED-ILLUMINATED
MONORAIL
2
1
CONDUCTIVE OR ISOLATING JOIN CONNECTORS
1
Push the Monorail sections completely onto the conductive or
isolating connectors.
2
Tighten the M3 set screws with the 1.5 MM Allen wrench.
Make sure that the set screw connection for conductive
connector is tight to avoid heat build up and corrosion. For the
isolating connector, tighten the M3 set screw firmly to avoid
stripping the thread.
WRENCH
M3 SET SCREW
1
LED-ILLUMINATED
MONORAIL
1
FIBER OPTIC CABLE
Feed the fiber optic cable completely through the LEDIlluminated Monorail.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
2
A Generation Brands CompanyA Generation Brands Company