LBL Lighting LED Illum MO Generator Single User Manual

Installation Instructions for

980MRLSGEN-LED

LED Generator (Single)

LED-Illuminated Monorail

GP I :ENERAL RODUCT NFORMATION

Connecting the LED Generator to
the LED-Illuminated Monorail

LEDMRLE_SC

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

1.1

1A1A

LED-ILLUMINATED

MONORAIL

1.6 MM ALLEN WRENCH

M3 SET
SCREW

CONDUCTIVE CONNECTORS

3

2

1

LED GENERATOR

1

Feed the conductive connectors completely into the LED­Illuminated Monorail.

Push the LED generator completely onto the other side of the

2

conductive connectors.

3

Tighten each conductive connector M3 set screws with the
provided 1.6 MM Allen wrench by inserting the 1.6 MM Allen
wrench through the LED generator hole to access the set
screw. Make sure that the set screw connection is tight to
avoid heat build up and corrosion.

SAVETHESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

1

A Generation Brands CompanyA Generation Brands Company