LBL Lighting LED Illum MO Generator Dual User Manual

Installation Instructions for

980MRLDGEN-LED

LED Generator (Dual)

LED-Illuminated Monorail

GP I :ENERAL RODUCT NFORMATION

Connecting the LED Generator to
the LED-Illuminated Monorail

LEDMRLC_SC

1.1

1A1A 1A1B

1.6 MM ALLEN WRENCH

LED-ILLUMINATED

MONORAIL

3

2

1

CONDUCTIVE CONNECTORS

1

Feed the conductive connectors completely into the LED­Illuminated Monorail.

Push the LED generator completely onto the other side of the

2

conductive connectors.

3

Tighten each conductive connector M3 set screws with the
provided 1.6 MM Allen wrench by inserting the 1.6 MM Allen
wrench through the LED generator hole to access the set
screw. Make sure that the set screw connection is tight to
avoid heat build up and corrosion.

LED GENERATOR

M3 SET SCREW

4

LED-ILLUMINATED

MONORAIL

4

4

LED GENERATOR

Repeat steps 1through 3 to install the led Monorail on the
other side of the LED generator.

1

SAVETHESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

2

A Generation Brands CompanyA Generation Brands Company