LBL Lighting Kona II SP User Manual

Installation Instructions for
980KONAIISP
Kona II
Suspension
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
LF5180_SC2D100
1.0
Install the Lamp
1A
SOCKET
LAMP
CAUTION:To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture.
Use Volt, WattType A19MAX 100120 Medium Base Lamp.
11
Screw the lamp completely into the socket.
2
Refer to the instructions provided with the canopy to install the fixture.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.
1
A Generation Brands Company
Loading...