LBL Lighting Isis GP User Manual

Installation Instructions for

980ISISGP

Isis Pendent

Suspension

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

CAUTION - RISK OF FIRE

This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.

LF625_2D

1.0

Assemble the Fixture

1A

INNER GLASS

1

OUTER GLASS

1B

1

SOCKET

LAMP

1

Place the outer glass on the ground standing up and
install the inner glass.

Use
Type A19 Medium Base Lamp.

2

Screw the lamp into the socket.

1

120 voltMAX 75 Watt

1C

MOUNTING ROD MOUNTING ROD

CAUTION: Due to the fixture’s weight, assistance will

be need for installation and relamping.

23

Place the hardware inside the inner glass, align the inner
and outer glass mounting holes, and completely install
the thumb screws.

Re-lamping: To re-lamp, reverse the installation

instructions to gain access to the socket.

CAUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.

Use
Type A19 Medium Base Lamp.

120 voltMAX 75 Watt

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2012 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

A Generation Brands Company

2