LBL Lighting Fiona 18 Flush Mount CF User Manual
Installation Instructions for
980FIONA18CCF
Fiona 18 Ceiling (Compact Fluorescent)
Ceiling
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This instruction shows a typical installation.
Install the Shade
1A
KNURLED NUT
1 1
Install the Fixture
2A
1
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
MOUNTING PLATE
FM700_CF
CAUTION - RISK OF FIRE
1.0
SHADE
STUD
KNURLED NUT
1
1
1
TOP VIEW
1
FIXTURE
1
Remove the mounting plate from the fixture base by
unscrewing the two knurled nuts from the two
threaded studs.
1
Install the shade by aligning the screws on the shade
with the holes on the fixture and secure them together
using the provided knurled nuts.
1
2B
MOUNTING
PLATE
2 2
#8-32 SCREW #8-32 SCREW
22
Mount the mounting plate to the electrical box with
the two #8-32 screws.
2C
3
ELECTRICAL
BOX
2D
MOUNTING PLATE
7 7
KNURLED NUT
26
Properly place all wires and wire nut connections into
FIXTURE
the electrical box.
27
Mount the fixture onto the threaded studs on the
mounting plate and secure it by tightening the two
knurled nuts.
STUD
4
3
Connect the mounting plate ground wire to a suitable
5
ground in accordance with local electrical codes.
4
Connect the white fixture wire to the neutral power line
wire with a wire nut.
5
Connect the black fixture wire to the hot power line
wire with a wire nut.
2
Loading...