
Installation Instructions for
980FNLCMW
Final Call Medium Bath
Wall
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
PW674_CF
1.0
Install the Fixture Base
1A
FIXTURE
BASE
FIXTURE
SCREW
1
1
With the Allen wrench provided, remove the two fixture
screws.
Separate the front cover from the fixture base.
2
2
FRONT
COVER
ALLEN WRENCH
1
FIXTURE
SCREW
1

1B
#8-32 SCREW
1D
BACKPLATE
SCREWS
CROSSBAR
ELECTRICAL BOX
#8-32 SCREW
23
Align the backplate mounting screws horizontally and
mount the crossbar to the electrical box with the two
#8-32 screws provided.
1C
BACKPLATE
SCREWS
THUMB NUT THUMB NUT
7
Install the fixture base onto the crossbar and secure it
tightly with the two thumb nuts.
4
5
4
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
5
Connect the white fixture wire to the neutral power line
wire with a wire nut.
3
6
Connect the black fixture wire to the hot power line
wire with a wire nut.
2

Install the Lamp and Cover
2A
NOTE: To re-lamp, reverse figures 2A and 2B or
simply reach inside the fixture if possible.
LAMP
1 1
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
use type T5 high output linear
MAX 39 Watt
fluorescent lamp.
11
Line up the lamp pins into the sockets and rotate the
lamps to lock it in place.
LAMP SOCKETLAMP SOCKET
2B
2
FIXTURE
SCREW
1
2
Re-install the front cover and secure it tightly with the
two fixture screws using the Allen wrench.
NOTE: To re-lamp, reverse section 2.
FRONT
COVER
ALLEN WRENCH
2
FIXTURE
SCREW
3

SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4