LBL Lighting Dahling W D User Manual
Installation Instructions for
980DHLNGWD
Dahling Wall (LED)
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a low-voltage electronic dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
CAUTION - RISK OF FIRE
This product requires installation by a qualified
This product requires installation by a qualified
This product requires installation by a qualified
electrician. Before installing be sure to read all
electrician. Before installing be sure to read all
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
instructions and TURNTHE POWER TO THE
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
ELECTRICAL BOX OFF.
ELECTRICAL BOX OFF.
CAUTION - RISK OF FIRE
LW622GO_LED
1.1
Install the Fixture
1A
THUMB SCREW
LED PLATE
THUMB SCREW
To gain access to the mounting plate holes, remove the
1
two thumb screw to temporarily loosen the plate
holding the LED lamp.
1B
DRIVER
4
3
Connect the mounting plate ground wire to a suitable
62
ground in accordance to local electrical codes.
Connect the white driver wire to the neutral power line
63
wire with a wire nut.
64
Connect the black driver wire to the hot power line wire
with a wire nut.
1
Install the Shade
1C
4 4
5
Properly place all wire, wire nut connections, and the
driver inside the electrical box.
6
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
2A
GLASS SHADE
1 1
1
Align the holes in the glass shade with the mounting
plate and screw in the thumb screws completely.
1D
THUMB SCREW
LED PLATE
THUMB SCREW
Re-install the LED Plate and secure it tightly with the
67
two thumb screws.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2013 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
2
Loading...