LBL Lighting Dahling W User Manual

Installation Instructions for

980DHLNGW

Dahling Wall

Wall

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.

This product can be dimmed with a standard incandescent dimmer.

This instruction shows a typical installation.

CAUTION - RISK OF FIRE

This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.

LF622GO_2D

1.1

Install the Fixture

1A

3

1

2

1

Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.

1B

4 4

4

Attach the mounting plate to the electrical box using
the two #8-32 screws provided.

2

Connect the white fixture wire to the neutral power line
wire with a wire nut.

3

Connect the black fixture wire to the hot power line
wire with a wire nut.

1

Install the Lamp and Shade

2A

SOCKET

1

LAMP

CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.

Use 120 voltMAX 75 Watt
Type A19 Medium Base Lamp.

1

Screw the new lamp into the socket.

2B

2

SAVE THESE INSTRUCTIONS!

22

2

Align the holes in the glass shade with the mounting
plate and screw in the thumb screws completely.

Note: To relamp, remove the shade by reversing
section 2 instructions.

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2013 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

2

A Generation Brands Company