LBL Lighting Boardwalk Small User Manual
Installation Instructions for
980BOARDWSO
Boardwalk Small Outdoor
Outdoor
GENERAL PRODUCT INFORMATION:
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURNTHE POWER TO THE
ELECTRICAL BOX OFF.
JW635_2D
1.0
Install the Mounting Plate
1A 1B
ALLEN WRENCH
1
1
FIXTURE
SCREW
MOUNTING
PLATE
1
1
BACKPLATE
SCREWS
CROSSBAR
#8-32 SCREW
BACKPLATE
SCREWS
ELECTRICAL BOX
#8-32 SCREW
1
1
With the Allen wrench provided, remove the four fixture
screws.
Remove the mounting plate from the back of the
2
2
fixture.
23
Align the backplate mounting screws horizontally and
mount the crossbar to the electrical box with the two
#8-32 screws provided.
1
Assemble the Fixture
1C
4
5
4
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
2A
SOCKET
3
LAMP
1
CAUTION: To reduce the risk of a burn or electric
shock during lamping and re-lamping, disconnect
the power to the fixture.
5
Connect the white fixture wire to the neutral power line
wire with a wire nut.
6
Connect the black fixture wire to the hot power line
wire with a wire nut.
1D
THUMB NUT THUMB NUT
1
Use
Type A19 Medium Base Lamp.
1
Screw the lamp into the socket.
120 voltMAX 75 Watt
7
Install the mounting plate onto the crossbar and secure
it tightly with the two thumb nuts.
2
Loading...