La-Z-Boy Silver Luxury-Lift Power Recliner User Manual [en, es, fr]

operating instructions

__________

la-z-boy.com

instrucciones de operación

Silver Luxury-Lift

fauteuil inclinable ÉlectroPlus

power recliner

Sillón reclinable

__________

instructions

La-Z-Boy Incorporated

1284 N. Telegraph Road

Monroe, MI 4816 2

DOC007913 Rev. 06/14

Congratulations!

Table of Contents

You are now the proud owner of a

stat e-of-the-art Silver Luxury-Lift

Power Recliner by La-Z-Boy.

You have just selected one of the

finest quality upholstered products

produced in the furniture industry,

backed by over 86 years of quality

manufacturing experience.

La-Z-Boy is proud of our designs

and craftsmanship and knows you

Important Safety Instructions..........................................4-5

Silver Luxury-Lift

Power Recliner

Assembly Instructions....................................................6-9

Silver Luxury-Lift

Power Recliner

Adjustable Glides..........................................................................10

Silver Luxury-Lift

Power Recliner Battery Backup

Assembly Instructions.................................................................11

Silver Luxury-Lift

Power Recliner

Operating Instructions...........................................................12 -15

Silver Luxury-Lift

Power Recliner Troubleshooting ............ 16

Furniture Placement Guide ..................................................17

will feel the same as you enjoy your

new furniture’s comfort and style.

IMPORTANT

Read the safety and other instructions before

using your Silver Luxury-Lift

manual for future reference.

Power Recliner. Keep this

Disclaimer: The information and products featured in this manual may be somewhat

different from the product you purchased. La-Z-Boy

substitutions that are equal in quality and performance.

reserves the right to make

Important Safety Instructions:

Important: Read these instructions thoroughly before using.

Important Safety Instructions:

Important: Read these instructions thoroughly before using.

DANGER

• Do not let children play on or near the chair when in use. Serious injury or death could occur if head or body parts are under the chair when the chair is in motion.

• Disconnect the electrical plug from outlet before cleaning, moving, servicing or when not in use for an extended period of time.

• Do not use this product if it is wet, in water, around water or any liquid. Do not handle the plug or remote control with wet hands.

• To prevent suffocation keep plastic bags away from children.

• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.

• Keep cord out of reach of small children, and do not use where it may be a trip hazard.

WARNING

• Always keep open flame and lit cigarettes away from upholstered furniture. Upholstered furniture may burn rapidly with toxic gas and thick smoke.

• Closely supervise children and disabled persons using this product.

• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back of the unit. Move the unit into or out of the reclining position slowly, making sure that no children or pets are in close proximity.

• This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers and body parts away from the mechanism. To reduce the risk of head entrapment and other injuries, keep children and pets away from openings and moving parts in and around furniture.

• Only the occupant should operate the unit. Never attempt to open the legrest by pulling on it.

• Do not stand, sit, or place extra weight on the arms, back or open legrest.

• To safely exit the unit and prevent a tripping hazard, bring the back upright and close the legrest.

• Do not use this product if it is damaged. Do not use attachments or substitute parts.

• This product is intended for indoor residential use only.

• Provide a clear path for operation of the back and legrest. Place tables and area rugs at a distance to allow the legrest to fully extend without rubbing or interference.

• Check the condition of the power transformers, electrical cords, plugs, and connectors monthly. Keep the power transformers and electrical cords away from heat sources. Never operate the unit with a damaged power transformer, electrical cord, plug, or connector. Contact your La-Z-Boy

• Do not use unit if power control is damaged or wet. Do not use unit if the hand wand has been dropped in water or any liquid. Contact your La-Z-Boy

• This product is not intended for use as a health care device. Some medications and physical limitations may impair your ability to operate this product in a safe manner. Consult your physician if you are taking prescribed or over the counter medication, or if you have physical limitations.

• Users of medical devices should contact their health care provider before using this product. Do not use this product if you have poor circulation, are immobile, or cannot sense heat, except as directed by your health care provider.

• Unit is designed to ease exit from the chair. Take care to not slip out of chair when chair is in motion.

-- To reduce the risk of electric shock, serious injury or death:

-- To reduce the risk of burns, fire, electric shock, serious injury or death:

dealer for service.

• Do not use this product where aerosol (spray) products are being used or where oxygen is being administered.

• In the event of a power failure, the battery backup provided may not lift the user to a fully raised position. To ensure lift functionality during a power outage, a battery backup system must be purchased separately. Contact your La-Z-Boy transformer batteries every six months and after each power failure use.

• Do not operate the unit until the back is installed and locked.

• Before moving the product, disconnect the electrical plug from the wall outlet and secure the mechanism to prevent unexpected opening or movement. Never move the product by the mechanism, legrest, handle, reclining back or swivel base.

• Do not attempt to disassemble or service the pump or motor; no serviceable parts are inside. Contact your La-Z-Boy

• Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord under carpet or in a location where it could become worn.

• Do not use pillow, blanket, or other cover between occupant and chair surface when heat is engaged.

• Always unplug the power cord before connecting or disconnecting the hand wand.

• Unplug the power cord immediately if you detect strange odors or fumes coming from the chair.

• Do not attempt to disconnect the power plug by pulling the power cord. Always hold the power plug and pull it out.

• Burns may result from improper use and care of internal heating pads. To avoid risk of burns, do not use pins, do not allow heating pad area to become wet, and do not remove upholstery cover.

• To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

• The 4LP lift chairs are intended for a single occupant, not exceeding 325 pounds. Do not operate the chair with more than one occupant in or on any part of the chair.

• If you give this product to someone else, include this Operating Instructions manual.

NOTICE

• To prevent damage to the power transformer, do not plug in until instructed.

• Gently press the buttons during operation and avoid hitting the buttons with pointed or hard objects.

• Never operate the unit except when it is on its base in the upright position.

• After 2 minutes of continuous operation of the 4LP lift chairs, allow the lift and recline features to rest for 16 minutes.

• Never operate the unit until the shipping cable tie has been removed from the mechanism.

dealer for service.

– To reduce the risk of product damage:

dealer for more information. Replace the power

Save These Instructions

Silver Luxury-Lift®Power Recliner

Assembly Instructions

Silver Luxury-Lift®Power Recliner

Assembly Instructions

NOTICE

• Do not plug the transformer in until instructed.

• Never operate the unit until the shipping cable tie has been removed from the mechanism.

1. Choose a location for the lift chair that is close to an electrical outlet.

2. Starting with the unit removed from the carton and unpacked, lay the back across the chair arms with the back cushion facing the seat, and turn the outside back cover over, toward the front of the chair. Cut and remove the shipping cable tie securing the mechanism assembly, located at the rear of the mechanism (F

3. Cut the cable tie securing the hand wand, power cord and power transformer box to the inside of the back (F

4. Connect the hand wand. Locate the black round connector at the rear of the body (F the arrow on the hand wand connector to the arrow on the body connector, push the connectors together and close the locking cover to secure the connection (F the seat, toward the front of the chair.

WARNING

• Do not operate the unit until the back is installed and locked.

5. Install the back.

• Turn the locking levers, located on the brackets attached to the back (one on each side),

to a 90 degree angle (F

• Note the location of the fastening tape sewn to the back cover; the mating fastening

tape is on the bottom side of the rear rail. Do not attach the fastening tape at this time.

• With the back across the chair arms, lift the back at a slight angle and align the brackets

on the back with the brackets on the body (F

• Lower the back onto the body, making sure the back and body brackets are completely engaged.

- Lift the back upholstery cover to visually confirm that both sets of back and body brackets are engaged (F steps above.

- If you are unable to install the back properly, contact your La-Z-Boy

• Lock the brackets by using a screwdriver to push down the locking levers (FIGURE 5).

– To reduce the risk of product damage:

IGURE 1).

IGURE 3). Remove the hand wand from the packing and set the other parts aside.

IGURE 3), align

IGURE 2). Lay the hand wand across

– To reduce the risk of injury:

IGURE 3).

IGURE 4). If one or both brackets are not engaged, remove the back and repeat the

dealer for assistance.

FIGURE 1

Shipping Cable Tie

IGURE 3

IGURE 4

Hand Wand, Power Cord and Power Transformer Box

FIGURE 2

Back Bracket

Body Bracket

Hand Wand Connector at Rear Body

FIGURE 5

Hand Wand Connection

Locking Lever

Body Bracket

Back

Locking

Lever

Locked

(Assembly Instructions Continued)

Back and Body

Brackets Engaged

Position

Bracket

Silver Luxury-Lift®Power Recliner

Assembly Instructions

Luxury-Lift®Power Recliner

Assembly Instructions

6. Attach the outside back cover. The back upholstery cover attaches to the body using fastening tape. Pull the outside back upholstery cover down tight and firmly press the fastening tape on the outside back cover to the fastening tape on the bottom side of the rear rail (F

7. Make the power transformer connections.

• Remove power transformer from box and unwind cord.

• Align the power transformer connector to the power supply connector from behind the chair

and push the connectors together until they lock (F

• Connect the 120 volt power cord to the power transformer. Align the 120 volt power cord connector

to the power transformer and push together until fully seated (F instructed in the Operating Instructions.

8. Proceed to the Glide Adjustment Instructions, followed by the Battery Backup Assembly Instructions.

9. To remove the back, unplug the 120 volt power cord from the electrical outlet and disconnect the power transformer connector from the power supply connector. Reverse the Assembly Instructions steps.

IGURE 7).

IGURE 6).

IGURE 7). Do not plug in until

FIGURE 6

Fastening Tape

FIGURE 7

Rear Rail

Note: Fastening tape located on bottom side of the body rear rail is not visible.

Fastening Tape

Power Transformer/ Power Supply Connection

120 Volt Power Cord Connection

(Assembly Instructions Continued)

Silver Luxury-Lift®Power Recliner

Glide Adjustment Instructions

Silver Luxury-Lift®Power Recliner

Battery Backup Assembly Instructions

WARNING

• Provide a clear path for operation of the back and legrest. Place tables and area rugs at

a distance to allow the legrest to fully extend without rubbing or interference.

Adjusting the Glides

Adjustable glides are provided in the front of the base to raise and level the chair as required. Make sure to adjust the glides to a height that provides a clear path for operation of the legrest (see Furniture Placement Guide).

• Each glide is attached to the base by one jam nut and one lock washer. Loosen the jam nut.

• Turn the glide clockwise to lower the chair or counterclockwise to raise the chair.

• After proper adjustment, tighten the jam nut to the lock washer. Make adjustments

as necessary.

• Repeat these steps for the other adjustable glide, if necessary.

– To reduce the risk of serious injury:

Adjustable Glide

Lock Washer

Jam Nut

Base Glide

WARNING

• In the event of a power failure, the battery backup provided may not lift the user to a fully raised position. To ensure lift functionality during a power outage, a battery backup system must be purchased separately. Contact your La-Z-Boy Replace the power transformer batteries every six months and after each power failure use.

Battery Backup Assembly Instructions

The performance of the built-in battery backup cannot be guaranteed. If you require continuing use during a power outage, you should purchase a separate battery backup system. Contact your La-Z- Boy®dealer for more information.

The operating speed is reduced when operating on battery backup. Always maintain constant, even pressure on the button or toggle when operating on battery backup

to reduce energy consumption. The built-in battery backup is located in the power transformer and uses two 9-volt alkaline batteries

(not included).

1. Unplug the power transformer from the electrical outlet and disconnect the power transformer connection at the base of the chair.

2. The battery compartment is located on the side of the power transformer. Slide the battery cover up to access the battery compartment.

3. Place the connection caps over the battery terminals on each battery. Place the batteries in the compartment, taking care not to damage any wires.

4. Slide the battery cover over the compartment.

5. Proceed to the Operating Instructions.

– To reduce the risk of serious injury:

dealer for more information.

Power Transformer

Battery Cover

(2) 9-Volt Alkaline Batteries

Silver Luxury-Lift®Power Recliner Transformer Specifications:

Input: 120–240V~,50/60Hz,1.5A

Output: 29V, 2.0A

Silver Luxury-Lift®Power Recliner

Operating Instructions

DANGER

• Do not let children play on or near the chair when in use. Serious injury or death could occur if head or body parts are under the chair when the chair is in motion.

• Do not use this product if it is wet, in water, around water or any liquid. Do not handle the plug or remote control with wet hands.

• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.

• Keep cord out of reach of small children, and do not use where it may be a trip hazard.

WARNING

• The 4LP lift chairs are intended for a single occupant, not exceeding 325 pounds. Do not operate the chair with more than one occupant in or on any part of the chair.

• To safely exit the unit and prevent a tripping hazard, bring the back upright and close the legrest.

• Unit is designed to ease exit from the chair. Take care to not slip out of chair when chair is in motion.

NOTICE

• After 2 minutes of continuous operation of the 4LP lift chairs, allow the lift and recline features to rest for 16 minutes.

Getting Started

To avoid product damage, the 4LP lift and recline features should not be operated continuously for extended periods of time. After 2 minutes of continuous operation, allow the lift and recline features to rest for 16 minutes.

Connect the power transformer connector to the connector at the base of the lift chair. Connect the 120 volt power cord to the transformer. Plug the power transformer directly into a wall outlet.

Silver Luxury-Lift®Power Recliner Operation

The 4LP offers multiple modes of operation. The large, round LIFT and RECLINE button on the front of the hand wand AND the toggle on the back of the hand wand provide coordinated movements. The LIFT and RECLINE button and back toggle will operate all functions of the chair in one fluid movement from sitting, reclining and legrest extension, back to the upright position and standing.

To sit down in the chair:

1. Stand beside the chair and press down on the front LIFT button and hold, or press the back toggle down and hold. Release the button or toggle when the chair reaches a comfortable height

to sit against, depending on your personal needs and preference.

2. Step back into the chair and sit in the center of the seat while keeping your feet firmly on the floor.

3. Press down on the front RECLINE button and hold, or press the back toggle up and hold, to lower the chair. Release the button or toggle when the chair reaches the upright, seated position.

– To reduce the risk of serious injury or death:

– To reduce the risk of serious injury:

– To reduce the risk of product damage:

Silver Luxury-Lift®Power Recliner

To recline the chair:

There are multiple modes of operation to recline the chair. The back and legrest move together using the large, round LIFT and RECLINE button on the front of the hand wand, or the toggle on the back of the hand wand.

1. With the chair in the seated position, press and hold the large round RECLINE button, or press the back toggle up, and hold to recline the back and raise the legrest. Release the button or toggle when you are in a comfortable position.

2. Make adjustments to the back and legrest recline as preferred.

3. To return the chair to the upright, seated position, press and hold down on the front, large round LIFT button, or press and hold the back toggle down. Release the button or toggle when you reach the upright, seated position.

To stand up from the chair:

There are multiple modes of operation for the lift feature. The round LIFT button on the front and the toggle on the back provide a coordinated movement of the lift function. The chair must be in its upright, seated position feature to function.

1. Firmly position your feet on the floor to maintain balance and prevent sliding or falling. Press down on the front LIFT button and hold, or press the back toggle down and hold, to raise the chair to the standing position.

2. Release the button or toggle when the chair reaches a height that enables you to comfortably stand. Carefully exit the chair.

3. Return the chair to the upright, seated position if you will be away from the chair for an extended period of time. Press down on the front RECLINE button and hold, or press the back toggle up and hold, to lower the chair. Release the button or toggle when the chair is in its upright, seated position.

Operating Instructions

–

with the back fully upright and the legrest fully closed–for the lift

Additional Operating Features:

Safety Legrest

The Silver lift chairs include a breakaway legrest safety feature. When the legrest encounters most ordinary obstructions while closing, the legrest will disengage, or breakaway, from the mechanism. You will hear a “pop” when this happens and the legrest will stop moving.

If the legrest becomes disengaged from the mechanism, gently pull up on the legrest and remove the obstruction from the legrest path. The legrest should be near the closed position. Then, firmly push the legrest closed with your legs. You will hear a “pop” when the legrest is reconnected to the mechanism.

Because of the sensitivity of the breakaway feature, the legrest may disengage if you place your full body weight toward the front of the chair while lowering the legrest. If this happens, reposition your body weight and firmly push the legrest closed with your legs. The legrest should be near the closed position when reengaging the mechanism.

Power Transformer Over-Current Protection

The Silver series lift chairs are equipped with over-current protection. This feature prevents damage to the motors and electronics if there is an overload, short circuit or ground fault. Should the system detect an over-current, the system shuts down and the recliner stops functioning.

If the over-current protection is activated, stop pressing the button or toggle in use. The system should reset automatically. If you believe the chair is not being overloaded, or experiencing a short circuit or ground fault, you may restart the function of the chair after the button or toggle has been released. Should the over-current protection trip repeatedly, refer to the Troubleshooting section in this manual.

Additionally, the power supply includes a green LED status light to indicate power is being supplied to the system. If the light is not illuminated, no power is being supplied to the system. Refer to the Troubleshooting section in this manual if the power supply is plugged in, but the green light is not illuminated.

(Operating Instructions Continued)

Silver Luxury-Lift®Power Recliner

Operating Instructions

Silver Luxury-Lift

Operating Instructions

Power Recliner

Coordinated Lift & Return Button

When seated, press and hold down on the LIFT

button to raise the chair to the standing position.

– OR –

When reclined, press and hold down on the LIFT button to return the back to the upright position and the legrest to the closed position.

Release the button to stop in any reclined position, or when fully upright.

FRONT

Coordinated Lower & Recline Button

When lifted, press and hold down on the RECLINE button to lower the chair to the seated position.

– OR –

When seated, press and hold down the RECLINE button to recline the back and raise the legrest.

Release the button to stop in any reclined position, or when fully reclined.

Toggle Down – Coordinated Lift & Return

When seated, press the toggle down and hold to raise the chair to the standing position.

– OR –

When reclined, press the toggle down and hold to return the back to the upright position and the legrest to the closed position.

Release the toggle to stop in any reclined position, or when fully upright.

BACK

Toggle Up – Coordinated Lower & Recline

When lifted, press the toggle up and hold up to lower the chair to the seated position.

– OR –

When seated, press the toggle up and hold up to recline the back and raise the legrest.

Release the toggle to stop in any reclined position, or when fully reclined.

WARNING

• Do not use unit if power control is damaged or wet. Do not use unit if the hand wand has been dropped in water or any liquid. Contact your La-Z-Boy

– To reduce the risk of serious injury:

dealer for service.

WARNING

• Do not use unit if power control is damaged or wet. Do not use unit if the hand wand has been dropped in water or any liquid. Contact your La-Z-Boy

– To reduce the risk of serious injury:

dealer for service.

+ 17 hidden pages

La-Z-Boy Silver Luxury-Lift Power Recliner User Manual [en, es, fr]

Specifications and Main Features

Frequently Asked Questions

User Manual