OUR LETTERS AND REPORTS ARE FOR THE EXCLUSIVE USE OF THE CLIENT TO WHOM THEY ARE ADDRESSED. ANY COMMUNICATION TO OTHERS OR THE USE OF OUR COMPANY NAME MUST RECEIVE PRIOR
APPROVAL. OUR TEST RESULTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. SAMPLES NOT DESTROYED
IN TESTING ARE RETAINED A MAXIMUM OF THIRTY DAYS. THE LETTERS, REPORTS OR NAME OF DIVERSIFIED TESTING LABORATORIES, INC. MAY NOT BE USED IN ADVERTISING TO THE GENERAL PUBLIC.
December 16, 2020
Mr. Pete Keel
DORELL FABRICS COMPANY
10870 Spencer Avenue
Fountain Valley, CA 92708
Reference: Laboratory Test Report
Lab Identification No. 43732
Invoice No. 74977
Dear Mr. Keel:
One (1) fabric sample, identified Midland T – higher warp yarn twist + increased warp density + NP + Coating (Woven
Fabric Category 1/Normal Duty), was received and tested in accordance with the test procedures outlined. The results
are as follows:
Test Procedures
Test Results
Meets La-Z-Boy’s Requirements
Warp
Fill
Breaking Strength (lbf)
ASTM D 5034-09 (Grab)
259.9
123.5
Yes
Tearing Strength (lbf)
ASTM D 2261-13 (Tongue)
60.1+
37.8
Yes
Seam Strength (lbf)
ASTM D 1683-17
86.0
90.4
Yes
Elongation (%)
UFS 1979-12
1.5
2.0
Yes
Fraying & Flagging Resistance
MFG-63-11
1 – Pass 50
1 – Pass 50
Yes
2 – Pass 50
2 – Pass 50
Resistance to Pilling
ASTM D 3511-16 (Brush)
5 – No Pilling
Yes
Martindale Pilling
ISO 12945-2-2000
After 1500 Cycles:
Yes
5 – No Pilling
Colorfastness to Crocking
AATCC 8-2016
Dry – 5
Yes
Wet – 5
Surface Abrasion
Joint Industry, Chapter 1
(Wire Screen Abradant)
W W F F
Yes
3,000:
5 5 5 5 6,000:
5 5 5 5 9,000:
5 5 5 5 12,000:
5 5 5 5 15,000:
5 5 5
5
If there are any questions or when we can be of further assistance, please let us know.
Sincerely,
Brian S. Dement
BSD/mr
OUR LETTERS AND REPORTS ARE FOR THE EXCLUSIVE USE OF THE CLIENT TO WHOM THEY ARE ADDRESSED. ANY COMMUNICATION TO OTHERS OR THE USE OF OUR COMPANY NAME MUST RECEIVE PRIOR
APPROVAL. OUR TEST RESULTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. SAMPLES NOT DESTROYED
IN TESTING ARE RETAINED A MAXIMUM OF THIRTY DAYS. THE LETTERS, REPORTS OR NAME OF DIVERSIFIED TESTING LABORATORIES, INC. MAY NOT BE USED IN ADVERTISING TO THE GENERAL PUBLIC.
December 16, 2020
Mr. Pete Keel
DORELL FABRICS COMPANY
10870 Spencer Avenue
Fountain Valley, CA 92708
Reference: Laboratory Test Report
Lab Identification No. 43732
Invoice No. 74977
Dear Mr. Keel:
One (1) fabric sample, identified Midland T – higher warp yarn twist + increased warp density + NP
+ Coating (Woven Fabric Category 1/Normal Duty), was received and tested in accordance with the
JOINT INDUSTRIES FABRIC STANDARDS AND GUIDELINES, Dated 6/94, Section 27.0, "Fiber
Migration". The results are as follows:
Test Results
Two (2) fiber ends protruding
Slight Migration
If there are any questions or when we can be of further assistance, please let us know.
Sincerely,
Brian S. Dement
BSD/mr
OUR LETTERS AND REPORTS ARE FOR THE EXCLUSIVE USE OF THE CLIENT TO WHOM THEY ARE ADDRESSED. ANY COMMUNICATION TO OTHERS OR THE USE OF OUR COMPANY NAME MUST RECEIVE PRIOR
APPROVAL. OUR TEST RESULTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. SAMPLES NOT DESTROYED
IN TESTING ARE RETAINED A MAXIMUM OF THIRTY DAYS. THE LETTERS, REPORTS OR NAME OF DIVERSIFIED TESTING LABORATORIES, INC. MAY NOT BE USED IN ADVERTISING TO THE GENERAL PUBLIC.
December 16, 2020
Mr. Pete Keel
DORELL FABRICS COMPANY
10870 Spencer Avenue
Fountain Valley, CA 92708
Reference: Laboratory Test Report
Lab Identification No. 43732
Invoice No. 74977
Dear Mr. Keel:
One (1) fabric sample, identified Midland T – higher warp yarn twist + increased warp density + NP
+ Coating (Woven Fabric Category 1/Normal Duty), was received and tested in accordance with LaZ-Boy Test Method MFG-63-15. (Dynamic Sew Seam Fatigue Test). The results are as follows:
Test Results (mm of separation)
Warp to Warp
Filling to Filling
Warp to Filling
2 2 2 3 2
2 2 2
3
The sample submitted meets the minimum requirements of the above standard. No individual
specimen can have a seam slippage greater than 3mm or a visual failure*
If there are any questions or when we can be of further assistance, please let us know.
Sincerely,
Brian S. Dement
BSD/mr
OUR LETTERS AND REPORTS ARE FOR THE EXCLUSIVE USE OF THE CLIENT TO WHOM THEY ARE ADDRESSED. ANY COMMUNICATION TO OTHERS OR THE USE OF OUR COMPANY NAME MUST RECEIVE PRIOR
APPROVAL. OUR TEST RESULTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS. SAMPLES NOT DESTROYED
IN TESTING ARE RETAINED A MAXIMUM OF THIRTY DAYS. THE LETTERS, REPORTS OR NAME OF DIVERSIFIED TESTING LABORATORIES, INC. MAY NOT BE USED IN ADVERTISING TO THE GENERAL PUBLIC.
December 16, 2020
Mr. Pete Keel
DORELL FABRICS COMPANY
10870 Spencer Avenue
Fountain Valley, CA 92708
Reference: Laboratory Test Report
Lab Identification No. 43732
Invoice No. 74977
Dear Mr. Keel:
One (1) fabric sample, identified Midland T – higher warp yarn twist + increased warp density + NP
+ Coating (Woven Fabric Category 1/Normal Duty), was received and tested in accordance with the
California Technical Bulletin 117-2013, Section 1, Cover Fabric Test. The results are as follows:
Test Results
Vertical Char Lengths
15mm
14mm
16mm
The sample submitted meets the requirements of the above standard. There were no ignitions or
smoldering after 45 minutes on any of the three specimens tested. In addition, none of the three test
specimens displayed a char which was greater than 45 mm.
If there are any questions or when we can be of further assistance, please let us know.
Sincerely,
Brian S. Dement
BSD/mr
Loading...