LAZBOY D71 M80936 Owner's Manual

Page 1 of 4

OWNER’S MANUAL

Sears Bethany 9’ x 6.5’ Rectangular Umbrella

Product Code: D71 M80936

UPC Code: 7-22938-08020-5

Date of Purchase: __ / __ / __

If you have any problems with this product, DO NOT RETURN IT TO THE STORE.

CALL OUR CUSTOMER SERVICE HOT-LINE AT

[phone],

8AM -5PM (EST), Monday –Friday.

View the expanded assortment of outdoor living product on-line at

WWW.lazboyoutdoor.com

and WWW.sears.com

Page 2 of 4

WARRANTY

This warranty is a limited warranty, and applies to the original purchase only. Proof of purchase is required.
This is a residential warranty and does not apply to commercial use. This collection carries a 5 year limited
warranty and is valid from original date of purchase to the original owner (proof of purchase required):
NOTE: Glass breakage is not a warranted item.

Frame (Cast, Extruded Aluminum) – 5 Years

If the furniture frame fails structurally (i.e. broken frame or welds) within 5 years from the purchase date, we will
replace in the original color and style, if availabl e or in a similar color and st yle if the original has been discontinued.
Damage to frames or welds due to freeze damage and/or improper assembly are not covered.

Frame (Steel, Wrought Iron) – One Year

Wrought Iron and steel furniture is warranted for (1) year from the original purchase date against defects in
manufacturing and/or workmanship. NOTE: Steel and wrought iron are not warranted for rust, corrosion, or rust
staining.

Wicker Weave (Resin) and/or Straps – One Year

Straps and/or wicker weave shall be warranted against separation or breaking for one (1) year from the date of
purchase. Discoloration and /or fading due to exposure to elements, chemicals or harsh cleaning products are not
covered.

Powder Coat and/or Paint – One Year

Finishes shall be warranted against blistering, cracking, or peeling for a period of one (1) year from the original date of
purchase. We will replac e in the original color and style, if available or in similar color and style if the original has
been discontinued. Scratches, chips, and abrasion due to normal wear and tear are not covered.

Fabrics and Cushions – One Year

All fabrics and cushions shall be warranted against separation at the seams for a period of one (1) year from the
original date of purchase by the initial consumer. We will repair or replace any cushion or fabric in the original color
and style, if available, or in similar color and style if the original has been discontinued. Fading or discoloration due to
exposure to harsh chemicals is not covered.

Umbrellas – One Year

Umbrellas are warranted against failure structurally within one year from the date of purchase, du e to manufacturer ’s
defects only. Umbrella bases are not covered. Note: Umbrellas should only be used with a tab le a nd umbrella
base. Do not use in high wind or storms.

Component Parts – One Year

If a component part fails due to manufacturing defects within one (1) year from the date of purchase, we will, replace
the part.

Alternative Stone Tops – One Year

Tops are warranted for one (1) year against defects in manufacturing and/or workmanship.

Shipping

If required, we will pay for shipping of replacement products for the period of one (1) year from the date of purchase.
After (1) year it will be the original purchasers’ responsibility to pay for freight and packaging.

Exclusions

Failure caused by unreasonable or abusive use, fire, freight damage, acts of nature (such as, but not limited to
freezing or high winds), suntan oil or other chemicals, normal fading, scratching or chipping of the finish, fading,
weathering or staining or discoloration of furniture, accidental damage, repair, or modifications by customer, glass
breakage, normal wear and tear are excluded from the warranty.
Furniture used in commercial, contract or any other non-residential applications; clearance items, display models, and
all other as is

purchased items are not covered under this warranty. In addition, BJI, Inc. will not be responsible for
loss of use or time, inconvenience, travel, packaging, or any other consequential/incidental damages. In no event
shall BJI, Inc.’s responsibility exceed the value of the replacement part/product.

Care and Maintenance

Be careful to never allow water to build up in frames as this will cause corrosion and freeze d amage in cold climates.
Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth
towel. Frames can be treated with a liquid wax for maximum protection a gainst UV rays and/or salty damp air. If your
set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with
a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or
damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a co mmercial or ho me dr yer to tu mble dr y fabri c
goods).
Do not use bleach or solvents to clean any product! This will void the warranty.

Page 3 of 4

Customer Service: Monday-Friday 8:00 a.m.-5:00 p.m. EST

By FAX: [phone] By PHONE:[phone]
Address: 2700 Stanley Gault Parkway, Suite 130, Louisville, KY, 40223

CAUTION:

Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury!
Assembly product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item .
Seek assistance to assemble bulky or heavy items.
WARNING: Never use umbrella without a heavy umbrella base!

PART LIST

PARTS NO PARTS PARTS NAME QTY

A.

Support Tube 1

B. Umbrella w/ crank

handle

1

NOTICE:
Table and Umbrella Base are only for
constructional reference and sold separately

Figure 1

Step 1. Place the Umbrella Base under center of table.
Step 2. Loosen Knob on Umbrella Base
Step 3. Insert Support tube (A) through hole in table and completely into Umbrella base. (See Figure 1)
Step 4. Tighten Knob

Figure 1

Step 5. Before opening the Umbrella (B) turn it upside down and shake gently to separat e ribs.
Step 6. Carefully insert Umbrella (B) into Support Tube (A), until button rest on top of support tube. (See

Page 4 of 4

Figure 2)

Step 7. Align the button with the hole in the Support Tube (A), press the button and lower umbrella until button

snaps through hole in support tube. (See Figure 2)

Step 8. Make sure button is locked in hole as show in detail.

Figure 2

Step 9. Slowly turn the handle of the Umbrella (B) clockwise until umbrella is completely open.

Figure 3

NOTE: This is not a free standing umbrella! See warnings below.
Warning: Never use umbrella without an umbrella base and matching table.
Always leave umbrella in down position when not in use.
Never use umbrella in high wind conditions. Damage to umbrella and /or table can occur.