LAZBOY D71 M80901, M80914 Owner's Manual

OWNER’S MANUAL
Sears Peyton Recliner
Product Code: D71 M80901
UPC Code: 7-22938-07946-9
Date of Purchase: __ / __ / __
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
866-391-4868
8am-5pm (EST), Monday-Friday.
View the expanded assortment of outdoor living product
on-line at WWW.lazboyoutdoor.com
and WWW.sears.com
WARRANTY
This warranty is a limited warranty, and applies to the original purchase only. Proof of purchase is required. This is a residential warranty and does not apply to commercial use. This collection carries a 5 year limited warranty and is valid from original date of purchase to the original owner (proof of purchase required): NOTE: Glass breakag e is n ot a warranted item.
Frame (Cast, Extruded Aluminum) – 5 Years
If the furniture frame fails structurally (i.e. broken frame or welds) within 5 years from the purchase date, we will replace in the original color and style, if available or i n a similar colo r and style if the ori ginal has been discontinued. Damage to frames or welds due to freeze damage and/or improper assembly are not covered.
Frame (Steel, Wrought Iron) – One Year
Wrought Iron and steel furniture is warranted for (1) year from the original purchase date aga inst d efects in manufacturing and/or workmanship. NOTE: Steel and wrought iron are not warranted for rust, corrosion, or rust staining.
Wicker Weave (Resin) and/or Straps – One Year
Straps and/or wicker weave shall be warranted against separation or breaking for one (1) year from the date of purchase. Discoloration and /or fading due to exposure to elements, chemicals or harsh cleaning products are not covered.
Powder Coat and/or Paint – One Year
Finishes shall be warranted against blistering, cracking, or peeling for a period of one (1) year from the original date of purchase. We will replace in the original color and style, if available or i n similar color and style if the original has been discontinued. Scratches, chips, and abrasion due to normal wear and tear are not covered.
Fabrics and Cushions – One Year
All fabrics and cushions shall be warranted against separation at the seams for a period of one (1) year from the original date of purchase by the initial consumer. We will repair or replace any cushion or fabric in the original color and style, if available, or in similar color and style if the original has been discontinued. Fading or discoloration due to exposure to harsh chemicals is not covered.
Umbrellas – One Year
Umbrellas are warranted against failure structurally within one year from the date of purchase, due to manufacturer’s defects only. Umbrella bases are not covered. Note: Umbrellas should only be used with a table and umbrella base. Do not use in high wind or storms.
Component Parts – One Year
If a component part fails due to manufacturing defects within one (1) year from the date of purchase, we will, replace the part.
Alternative Stone Tops – One Year
Tops are warranted for one (1) year against defects in manufacturing and/or workmanship.
Shipping
If required, we will pay for shipping of replacement products for the period of one (1) year from the date of purchase. After (1) year it will be the original purchasers’ responsibility to pay for freight and packaging.
Exclusions
Failure caused by unreasonable or abusive use, fire, freight damage, acts of nature (such as, but not limited to freezing or high winds), suntan oil or other chemicals, normal fading, scratching or chipping of the finish, fading, weathering or staining or discoloration of furniture, accidental damage, repair, or modifications by customer, glass breakage, normal wear and tear are excluded from the warranty. Furniture used in commercial, contract or any other non-residential applications; clearance items, display models, and all other as is
purchased items are not covered under this warranty. In addition, BJI, Inc. will not be responsible for loss of use or time, inconvenience, travel, packaging, or any other consequential/incidental damages. In no event shall BJI, Inc.’s responsibility exceed the value of the replacement part/product.
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause co rrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never mach ine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty! Customer Service: Monday-Friday 8:00 a.m.-5:00 p.m. EST
By FAX: 502-410-0702 By PHONE:(866)391-4868 Address: 2700 Stanley Gault Parkway, Suite 130, Louisville, KY 40223
CAUTION: Read all the instruction before assembly. Failure to do so may result in faulty assembly and potential injury! Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoi d damaging th e item. Seek assistance to assemble bulky or heavy items.
Important Safety Instructions: Important: Read these instructions thoroughly before using
Important Safety Instructions:
Important: Read these instructions thoroughly before using
WARNING
— To reduce the risk of burns, fire or serious injury:
• Always keep open flame and lit cigarettes away from outdoor furniture. Outdoor furniture may burn rapidly with toxic gas and thick smoke.
• Closely supervise children and disabled persons using this product.
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back of the unit. Move the unit into or out of the reclining position slowly, making sure that no children or pets are in close proximity.
• This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers and body parts away from the mechanism. To reduce the risk of head entrapment and other injuries, keep children and pets away from openings and moving parts in and around furniture.
• Only the occupant should operate the unit. Never attempt to open the leg rest by pulling on it.
• Do not stand, sit or place extra weight on the arms, back or open leg rest.
• To safely exit the unit and prevent a tripping hazard bring the back upright and close the leg rest.
• Do not use this product if it is damaged. Do not use attachments or substitute parts.
• Provide a clear path for operation of the back and leg rest. Place tables and area rugs at a distance to allow the leg rest to fully extend without rubbing or interference.
• This product is not intended for use as a health care device.
• Do not operate the unit until the back is installed and locked.
• Use care when moving the product. Before lifting the product, secure the mechanism to prevent unexpected opening or movement. Never move the product by the mechanism, leg rest or reclining back. Disconnect modular units.
Securely grip non-moving parts only .
• Keep hands away from the internal frame parts. (See Figure 1 and Figure 2) .
Figure 1 Figure 2
PARTS LIST
PART# DESCRIPTION PICTURE Q’TY
A BODY
1
B BACK
1
C SEAT CUSHION
1
D BACK CUSHION
1
E TOSS PILLOW
1
The assembly instructions below are for chair back. Step1. Lay the back (B) across the arms of the body (A). Lift the back (B) at a slight angle and align the brackets on the back (B) with the brackets on the body (A). (See Expanded View Figure 3)
Figure 3
Step2. Lower the back (B) onto the body (A), making sure the back (B) and body (A) are completely engaged. To make sure the back (B) is properly installed with both sets of back and body brackets engaged, stand behind the chair and pull the back (B). If one or both sides move out of position the brackets are not engaged. Remove the back (B) and repeat the steps. (See Figure 4)
Figure 4
Step3. Put the seat cushion (C), back cushion (D), toss pillow (E) on the recliner frames. (See Figure 5)
Figure 5
Recliner Chair Operating Instructions
Figure 6 (the closed position) Figure 7 (the 1st position)
Figure 8 (the 2nd position)
Loading...