LAZBOY 45418, ALISTAIR Assembly Instructions Manual

Designed to be comfortable,
and built to stay that way.

Manager Chair

Assembly Instructions

Model Number: 45418 ITM./ART. 172586

ALISTAIR

Casters

Quantity: 5

Chair Assembly Instructions

Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components,
assemble the chair on a protected surface.

Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. Using these
casters on tile or wood flooring may cause floor surface damage, so please consider purchasing a chairmat to protect your floor surfaces.

We are here to help if you have any questions, comments, or are in need of warranty replacement parts.
Log on to: www.trueinnovations.com

Star Base

Quantity:1

Gas Lift with Telescoping Cover

Quantity: 1

Seat Plate

Quantity: 1

2

D

C

B

A

1” Screws

Quantity: 8

G

Allen Key M5

Quantity: 1

H

PARTS

Seat Cushion

Quantity:1

Back Cushion

Quantity: 1

F

E

Please check to ensure that you have received all the parts for the assembly of this chair. If you find any missing or damaged parts, do
not return to the store. UK customers are to call 0-800-051-6775 for assistance. Please note that a receipt is required for all warranty
replacements.
Service hours are: UK Standard Time: 2:00 pm-1:00 am Monday – Friday.

1. This chair is intended to be used in the office or home.

2. If components are missing, broken or damaged, stop use of the product until repairs are made.

3. Use only factory authorized components as replacements.

4. This chair is sold with hard tread casters for use on the carpeted areas.

5. This chair meets EN1335 type C requirements.

6. Please use a damp cloth with washing up liquid or soft soap and leave it natural drying when cleaning chair surface.

3

B

A

B

C

Step 1

Place the Star Base (B) upside down and insert 5 Casters (A)
into the holes on the Star Base (B).

Step 2

Turn the Star Base (B) over and insert the Gas Lift with
Telescoping Cover (C) through the center hole on top of Star
Base (B).

4

E

F

G

G

H

Step 3

Attach the Back Cushion (F) to the bottom of the Seat Cushion (E) by using 1“ Screws (G) in the bracket holes and tighten the
screws.

*Note : Tighten the screws completely.

5

H

G

G

E

Step 4

Attach Seat Plate (D) to the bottom of the Seat Cushion (E) (with the front of the seat plate facing the front of seat cushion).
Attach by using 1” Screws (G) for the holes of the Seat Plate (D) and tighten the screws.
*Note : Tighten the screws completely.

D

6

Step 5

Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift with Telescoping Cover (C) into the
center hole of the Seat Plate (D).

E

D

C

7

Operating Instructions

Function Instruction - 1

To Adjust Seat Height :

While seated, lean forward and reach under the right side of the chair to locate the handle. Lift the handle and raise your body up
slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle while applying more weight downward on
the seat. The chair will descend until the handle is released or the chair reaches the lowest position.

8

Function Instruction - 2

To Operate Tilt Lockout :

While seated, reach under the left side of the chair to find the lockout bar. Slide the bar to the left (toward the outside of the chair), all the
way out, to allow the chair to tilt backwards. To lock the chair in the vertical position, sit upright and push the bar to the right (toward the
center of the chair).

9

Function Instruction - 3

To Adjust Tension On The Tilt :

Reach under the front center of the chair, grasp the round knob (R) and turn it counter- clockwise to stiffen the tilt mechanism for a
heavier user. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user. Rotate the knob (R) until the desired resistance
is reached.

R

10

Limited Warranty

True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original
Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from
an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or
previously owned seating products.

True Innovations warrants its products to be free from defects in materials and workmanship (normal wear and tear, fading
and stretching excepted), for ten years from the date of purchase, except as provided below under the limited warranty.

The exceptions or exclusi

ons to this warranty are as follows:

1. Upholstery material and foam cushion material is warranted against defects in material and workmanship for a period of
one year, beginning on the date of purchase as shown on the original sales receipt.

2. Any warranty claim that is submitted after the limited warranty period, or without proper proof of purchase will not include
the cost of parts, labor, or delivery.

3. This warranty shall not apply to the True Innovations products which have been subjected to misuse, neglect, alteration,
modification, or attachments, either caused by the original purchaser, shipping, storage, accident, fire, flood, or acts of God.

In the event of a defect in material or workmanship

covered by this warranty, True Innovations will repair or replace, at their
discretion, without charge the warranted furniture within a reasonable amount of time. We reserve the right to require
damaged parts to be returned to us upon request. Natural markings such as scars, brands, grain variations, wrinkles, color
variations, etc. will be considered normal characteristics and not construed as defects. We cannot warrant leather against
scratching or scuffing, as all leather is subject to blemishes with use.

For claims or questions concerning this warranty, please contact True Innovations Customer Service department on the web at
www.trueinnovations.com. Be prepared to provide yo

ur name, address, daytime phone number, the model and purchase
order number of the product, date of purchase, and the store where it was purchased. True Innovations requires that the original
sales receipt be submitted with all requests to confirm that you are the original purchaser according to our written warranty.

All warranties are limited to the original purchaser for normal use which is defined as a standard work week of forty hours by
a person weighing less than 250lbs (113kg).

Should you prefer to speak with a service representative, you may call toll free: 0-800-051-6775 (UK).

LA-Z-BOY is a trademark of La-Z-Boy Incorporated and is used under license to LF Products Pte Ltd.