Lawmate PV-RC200HD2 User Manual

1. Names and parts

1

8

1. 5MP Camera

2. Microphone

9

2

10

3. Power on/Record

11

4. Power off

5. Photo

3

4

5

6

7

ON

* No microphones are available for USA market.

HD

OFF

6. Reset

7. Covert Cap

12

8. Memory Card Slot

9.

13

10. Charge LED

11. USB Port

12. Vibration Switch

13. Resolution Switch

FHD

2. Package Content

PV-RC200HD2

Lock

4GB

Adapter

MicroSD card

USB cable

Quick Guide

Quick guide

Power/Rec/Photo LED

3. Charge the battery

Power LED(Blue)
Rec/Photo LED(Red)

1. Remove the rear covert cap and connect the supplied USB
cable into the device.

2. Plug the USB cable to a PC, the green charge LED at the
rear of the device will illuminate to tell you it’s charging.

3. The green charge LED will illuminate to tell you it’s
charging and will turn off when the battery is full.

Charge LED(Green)
When battery is fully charged,
the green LED will turn off.

4. Download videos and photos from DVR

1. Video and photo files are stored in the memory card.

2. There are two ways to download video/photo files.

2.1 Using memory card reader to download video/photo files.

2.2 With the device powered on and memory card inserted,
connect the device to PC by USB connection. It will be
recognized by PC as an external drive for user to
download the video recordings and photo files.

5. Using PV-RC200HD2 as a webcam

1. Remove memory card from the device, connect to PC by
USB cable then power on the device.

2. PC detects the device as a webcam and installs it automatically,
no driver is needed for installation.(For XP,Vista & Windows 7)

3. Installation completed, webcam is ready for function.

6. Date and time setting (for Windows computer)

1. Right-click on Windows desktop. Choose Notepad to create a
*.txt (text) file. Then double-click the text file.

2. Suppose current time is April 11, 2015 15:00. Enter date
and time information as 2015.04.11 15:00:00 Note that a
space must be present in between date and hour and time must
be 24-hour format.

3. Save file name as settime.txt to the root directory of the
memory card.

4. Insert the memory card to the slot then power on the device.
The date and time setting is now completed.

5. Please note when the date and time information is successful
set to the deivce the settime.txt file should not be visible when
you connect the device to the computer again.

7. Operation

※ Please note, memory card needs to be formatted on the device
for the unit to recognize it. Formating memory cards over PC is
not recommended and may result in recording failure.

1. Format the memory card

1.1 Insert the memory card to the device then press once
to power on the device.

1.2 Press and hold the first, then press the button.

1.3

2. Basic operation

2.1 Power on: Press once and blue LED will illuminate.

2.2 Vibration On/Off, Resolution HD/VGA.

4

Release and at the same time. The red and blue LED
will turn off simultaneously with vibration. Please note all LED
should be turned off when memory card format is completed.

12

2.3 Record video: Press again and red LED will illuminate.

2.4 Stop recording: Press again and red record LED will
turn off.

2.5 Take photos: Press once and red LED will blink.

2.6 Power off: Press once to turn off the device.
The blue indicator will turn off.

4

5

3

13

3

3

5

4

3

5

PV-RC200HD2

1080p Key Chain DVR

Operation Manual

LawMate, innovation never stops

®

V1.0