Lawmate HT-18 Operation Manual

V1.0
HT-18 CCD Camera in Sport Cap Design Operation Manual
Law Enforcement Products Manufacturer
LawMate
User Instruction: HT-18 Connections Illustration
HT-18 can connect with a portable DVR:
1. Install the device same as Installation 1 shown above.
2. Insert HT-18 jack into A/V IN DC 5V OUT socket of the portable DVR device.
3. Press POWER-ON button of portable DVR for 3 seconds and release the button. Note that HOLD button should switch to left when press POWER-ON button.
4.
A green light will turn on to show that DVR device is turn-on properly
.
5. Press REC button to start recording.
6. Captured images are automatically shown on LCD display.
7. Audio and video signals are automatically collected into recorded file on DVR.
HT-18 can also output captured audio and video signals to an external display through AV switching cable:
1. Install the device same as Installation 2 shown above.
2. Slide the back cover of battery holder, BHD-SQ9V, to open the
battery tray.Insert a PP3 (9V) battery with proper cathode/anode direction into battery tray
.Switch to ON indication. PP3
(9V) battery supplies power to the connected camera, HT
-18.
3. The yellow and white color cable heads from switching cable,
S-PJ3R, are to connect with the external audio and video jacks from monitor/television.
4.
At the other end of switching cable, S-PJ3R, is a jack socket
connected with jack from HT
-18.
5. Captured images are automatically shown on the connected monitor/television.
6.
Audio and video signals are automatically collected into the
recorder connected with monitor/television. Noted that external monitor/television is required to connect with an audio and video recording device.Camera does not provide recording function itself.
HT-18 connects to portable DVR
HT-18 AV output connection
CCD Camera
9V Battery Holder
Microphone
Switching Cable
Optional Accessories Portable DVR- PV-1000Touch
Optional Accessories Portable DVR- PV-500EVO2/PV-500L2
Installation 1
Installation 2
Microphone
CCD Camera
Loading...