Lawmate GM-GV3 User Manual

MobileCam

1

GM-GV3 MobileCam & Viewer Software

User Guide

MobileCam

2

Table of Contents

Chapter 1 GM-GV3 MobileCam Overview

1.1 Package contents…………………………………………….

1.2 GM-GV3 overview..…………………………………

1.3 MobileCam peripheral connection diagram………..

Chapter 2 Install the Program & Setup the MobileCam.

2.1 Step 1. Connect the MobileCam to PC with USB cable.

2.2 Step 2. Software installation

2.3 Step 3. Driver installation

2.4 Step 4. Create user account.

2.5 Step 5. Setup the MobileCam network.

2.6 Step 6. View the online MobileCam

Chapter 3 MobileCamViewer Overview

3.1 Icon and status bar for device (MobileCam) side……………….
3,2 Icon and status bar for remote (PC) side…………………………

3.3 Device Setting

3.4 Device List

3.5 Map

Chapter 4. Account Maintenance

4.1 Forgot Password…………………………………………………

4.2 Change Password and e-mail……………………………………

4.3 Add, delete, or share device……………………………………..

4.4 Create account on MobileCam Viewer

Chapter 5 Setup GM-GV3 with USB connection

5.1 Set up GM-GV3 with USB

5.2 Quick Mobile network setup

Chapter 6 GM-GV3 MobileCam Specification

6.1 GM-GV3 specification…………………………………….…...09

MobileCam

3

Chapter 1 MobileCam Overview

1.1 Package Contents

1.2 GM-GV3 Overview

MobileCam

4

1. Record Key :

2. Power Key : Power on/off - Press more than 3 seconds.

SOS emergency - Press less than 3 seconds.

3. SOS on/off: SOS emergency function on/off

4. Micro SD slot

5. DC +5V input

6. Fan

7. Antenna

8. Video & Audio input

9. Control Port : Remote and GPS connection./ USB connection

10. Power LED : Blink - power on boot procedure.
On - Power on and operation.

11. Battery Status LED : On - Charging.

Off - Normal

Blink - Low battery.

12. Network Link Status LED. On – SIM missing or error.
Off –dial up.

Blink – Data Link.

13. Record LED : On - SD error.

Blink - Recording

14. Battery Connector

15. SIM Card Slot

MobileCam

5

1.3 MobileCam connection diagram

Chapter 2 Install the Program & Setup the MobileCam.

2.1 Step 1. Connect the MobileCam to PC with USB cable.

★ Insert the SIM card and Micro SD card properly.
★ Slide the battery pack in to position then lock the battery.

MobileCam

6

★ Attach the antenna and connect GM-GV3 to PC with USB cable then

power on the MobileCam. If battery is low, use the AC adaptor for power.
supply.

★ Please click “Cancel” if the dialog shows as below on PC screen after

MobileCam boot up.

Power On

MobileCam

7

2.2 Step 2. Software installation

★ Wait for the GM-GV3 blue led to stop flashing. Run MobileCam.exe
Please disable your antivius software before starting install ,

Vista/Win7 OS Please "Run as administrator"

Click “Next” icon to start the installation

Please keep GM-GV3 connected to PC with USB cable and

make sure PC is connected to the internet

★ Program folder path setup. Use default path or click “Browse” icon to

change the path then click “Next” icon.

MobileCam

8

★ Shortcut path setup. Use default path or click “Browse” icon to change

the path then click “Next” icon.

★ Shortcut setup. Select to create the windows desktop icon then click

the “Next” icon.

★ Installation information. Click “Install” to start the program installation.

★ Click the “Finish” icon to end the program installation.

MobileCam

9

2.3 Step 3. Driver installation

★ Click the “Next” icon to start the MobileCam setup procedure.

★ Wait for driver installation .

★ Click the “Continue” icon .If you see the dialogue screen below.