Lava LD-236DLH-B Instruction Manual

Download

Page 1

24” LED TV with DVD and Digital MPEG4 DVB-T/C Tuner

LD-236DLH-B

Page 2

Page 3

Contents

Caution Safety Information

Product Introduction

Front View/Accessories

OSD Menu

1. Channel menu

2. Picture menu

3. Sound menu

4. Time menu

6. Setup menu

1 2

8-14

8-9 10 11 12

Connections

5-6

Remote Control

Basic Operation

Multimedia Operation 16-18

Recording Operation 19-20

EPG Menu

30Simple Troubleshooting

5. Lock menu

13-14

Contents

DVD Operation

22-29

Maintenance and Service

Page 4

Caution

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE) Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling center. In the USA there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!

Caution

The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.

directives.

Page 5

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below

Electrical safety

• The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor.

• To prevent overload, don't share the same mains supply socket with too many other items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items on the leads, which may damage them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial (if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged.

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.

- anything accidentally penetrates the ventilation slots.

- the set does not work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside. You may invalidate the warranty. Qualified personnel only are permitted to service this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control handset, or when not using for along period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2") clearance all around the unit.

• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good care of the remote control, do not drop it or allow it to come into contact with liquids.

• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For stubborn stains, you may use a damp soft cloth with diluted detergent.

Safety Information

Page 6

Product Introduction

Front View

Accessories

Remote Control window

MENU: Display/exit the OSD menu. CH+/-: Scan through channels. VOL+/-: Adjust the volume.

SOURCE: Display the input source menu.

PLAY: Play/pause the disc playing. EJECT: Eject the disc. POWER: Turn on/standby the TV set.

DVD: Insert a 12cm disc according to the

silk.

(IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED indicator: Press POWER to turn on and off.

The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 30

to the left or right side and 200 above or below the control

window.

Indicator on(Red) Standby mode Indicator on(Green) Power on mode

User’s Guide

Remote Control

Mains cable

Mains adapter

Converter cable

for YPBPR video

The configuration of the components may look different fron the following illustration.

SOURCE

REC TV/TXT

CANCEL

ASPECT

MUTE

EXIT

REVEAL

EPG

HOLD SIZE SUBPAGE INDEX

SUBTITLE

VOL+

VOL-

CH+

CH-

REC LIST CH LIST NICAM/A2

SETUP

ZOOM SLOW

TITLE REP.

LANG.

DVD MENU

PICTURE SOUND

FAV

SLEEP

INFO

Page 7

Connections

Common Interface: CI slot.

ANT: Connect antenna or cable 75 Ohm coaxial to receive TV signal.

R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr)

CVBS: Connect it to video output terminal of DVD.

YPbPr: Connect them to the YPbPr video output terminal of DVD.(used in component source)

POWER: Connect to the mains adaptor.

USB: USB jack for update and PVR.

HDMI1/2: Connect it to the HDMI of DVD or other equipment.

PC: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.

PCAUDIO: Connect it to the audio output terminal of PC.

SCART: Connect them to the SCART video output terminal of DVD.(used in component source)

HP: Connect it to your headphone or other audio equipment.

DIGITAL AUDIO: Digital coaxial output.

DIGITAL AUDIO

POWER USB HDMI HDMI SCART PC AUDIO PC

YP P CVBS R IN L IN ANT COMMON INTERFACE

Page 8

SOURCE

REC TV/TXT

CANCEL

ASPECT

MUTE

EXIT

REVEAL

EPG

HOLD SIZE SUBPAGE INDEX

SUBTITLE

VOL+

VOL-

CH+

CH-

REC LIST CH LIST NICAM/A2

SETUP

ZOOM SLOW

TITLE REP.

LANG.

DVD

PICTURE SOUND

FAV

SLEEP

INFO

Remote Control

POWER: Turn the TV on/standby. SOURCE: Press to display the input source menu. NUMBER BUTTONS Press0-9 to select a TV channel directly when you are watching TV. FAV: Display the favorite program list. Return to the previous channel viewed. PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. MUTE: Press to mute the sound, press again or press VOL+ to unmute. INFO: Means information, to display brief information concerning the current channel or disc you are wathching.

CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the system settings to your preference. MENU: System setup menu. EXIT: Exit the OSD menu. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. SUBTITLE: Turn on/off the subtitle display in DTV mode and DVD mode. ASPECT: Cycles among screen display modes. CH+/- : Scan through channels. VOL+/- : Adjust the volume.

Page 9

Remote Control

REC : Press to start record the program in DVB mode. TV/TXT: Turn off/on the Teletext display. CANCEL: Cancel the Teletext display. REVEAL: Reveal any hidden text. HOLD: Hold or carry on the current subpage. SIZE: Press to see top half of page double size, Press again to see the bottom half of page double size. Press again for normal size. SUBPAGE: Press to enter subpages, pressagain to cancel. INDEX: Go to index. REC LIST: Record List. CH/LIST: Display the programs list. NICAM/A2: TV Nicam/A2 select. SETUP: DVD system setup. DVD MENU: DVD play list/Disc menu. LANG.: Select DVD disc language. ZOOM:

Zoom in/out the picture.

SLOW: Play DVD programs at slow speed. TITLE: DVD title. REP. : Repeat playing the title or chapter.

: Previous chapter.

: Next chapter.

: Fast reverse. : Fast forward.

: Stop program.

: Pause program. : Play program.

SOURCE

REC TV/TXT

CANCEL

ASPECT

MUTE

EXIT

REVEAL

EPG

HOLD SIZE SUBPAGE INDEX

SUBTITLE

VOL+

VOL-

CH+

CH-

REC LIST CH LIST NICAM/A2

SETUP

ZOOM SLOW

TITLE REP.

LANG.

DVD

PICTURE SOUND

FAV

SLEEP

INFO

Page 10

button to select the function item, press button to adjust/setup,

Basic Operation

Power on/off

1. Connect to the power supply with a power cord and an adaptor.

2. -To turn on the TV Press POWER button on the TV or remote control.

Press POWER button on the TV or remote control.

-To turn off theTV

Input Source select

Press SOURCE button on the TV set or remote control to display input source menu, and use CH+/- button on the TV set or Ĥ0ĥ!button on remote control to select the input source, press OK button on the remote control to enter.

Note: Before you select the input source, make sure the connections are prepared.

Basic OSD Menu operation

Press MENU button to display the OSD menu as below:

Use /

button to select the main menu, and press button to enter the submenu.

In the submenu, use /

Ĥĥ

or press OK button to enter the submenu. * (Press MENU button to return to the upper menu.) * (Press EXIT button to exit the menu display.)

Note1: Only when you input the suitable signal, the relevant items can be activated Note2: Please operating the OSD menu according to hint on the bottom of the banner.

Main menu

CHANNEL PICTURE SOUND TIME LOCK SETUP

Submenu

(PICTURE menu for example)

Hint---you should operate the OSD menu according to the hint.

Page 11

OSD Menu

1. CHANNEL menu

Description

ĤĤĥ

Auto Tuning

Press OK button to enter the hint menu, and Press / button to select the Tune Type, then press button, and use / / / button to select the Country for the TV, then press OK button to start auto tuning.

CADTV Manual Tuning

Press OK button to enter the DTV Manual Tuning menu, select a DTV channel, and press OK button to start searching.

Press / button to manual search.

ĥ Ĥ

ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu.

Current CH: Select a Channel for storing the programme. Color System: Select from PAL, SECAM and AUTO Sound System: Select from I, BG, DK Search: Fine Tune: Press / button to fine-tune. AFC: Automatic Frequency control ON/OFF.

Page 12

channel by buttons.

OSD Menu

Ĥ0!!0!!!0ĥ

Channel List Press OK button to enter the Programme Edit menu as the following picture.

Rename: Select an ATV channel and press the GREEN button to change the name of the

Move: Select an ATV channel, and press YELLOW button, then you can use and buttons

to change the position of the program, press YELLOW again to confirm the change. Press menu to exit and it will automatically save the current set. Skip: Select a channel and press the BLUE button to label the channel, as long as the channel has a skip label it will be skipped when searching through the channels with the CH+/- buttons.

CI Information

Please contact your “pay perview” provider who can supply a viewing card and cam unit with instructions for their use.

Software update(OAD)

Allows you to update the software from the OAD OAD turning-> turn off/on the OAD function.

Signal Information

Display the digital TV-signal information (DTV mode only).

Delete: Select a channel and press RED button, the program will be deleted.

Page 13

OSD Menu

2. PICTURE menu

Description

Picture Mode: Choose from Standard, Dynamic, Personal and Mild.

Note: Contrast, Brightness, Color and sharpness are only available and can be adjusted in

the User mode option in the Picture Mode Settings.

Contrast: Controls the difference between the brightest and darkest regions of the picture.

Brightness: Controls the overall brightness of the picture.

Colour:Control the color.

Sharpness: Increase this setting to see crisp edges in the picture; decrease it for soft edges.

Tint: Controls the tint ( NTSC mode only).

Colour Temperature: Choose from Cool, Normal and Warm.

Noise Reduction: Choose interference noise modes form Off, Low, Middle, High and Default.

Page 14

OSD Menu

3. SOUND menu

Description

Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and Personal.

Treble(Can be adjusted when the sound mode is Personal): Controls the relative intensity of

higher pitched sounds.

Bass (Can be adjusted when the sound mode is set to Personal): Controls the relative intensity

of lower pitched sounds.

Balance: To adjust the balance of the left and right sound track, or turn off the volume of the

left and right sound track.

Auto Volume: Control the volume of the programme automatically when you turn on the function

by selecting “On”.

SPDIF MODE: Select the spdif mode.

AD Switch: Turn on/off the AD switch.

Page 15

OSD Menu

4. TIME menu

Description

Clock: Display the time.

Time Zone: Allows you to select the time zone.

Sleep Timer: Allows you to setup the sleep timer among: 10min, 20min, 30min, 60min, 90min,

120min,180min, 240min and off.

Auto Standby : Turn on/off the auto standby function when where’s no signal.

OSD Timer: Allows you to select the time for OSD menu displays on the screen.

Page 16

OSD Menu

5. LOCK menu

Description

Lock System: Turn on/off the Lock System function.

Note: You should enter the code to operate the menu.(original code is 0000)

Set Password: Set pin code. If the Pin code has been changed you must enter the present

code.

New : Enter the new password.

Confirm: Enter the new password.

Page 17

OSD Menu

Block Program: <RXPXVWHQWHUWKHSDVVZRUGWRYLHZFKDQQHOVWKDWKDYHEHHQORFNHG8VH

DQGEXWWRQVWRVHOHFWWKHFKDQQHODQGSUHVVWKH*5((1EXWWRQRQWKHUHPRWHFRQWUROWR ORFNWKHFKDQQHO

Parental Guidance:$OORZV\RXWRVHOHFWWKH3DUHQWDO*XLGDQFHPRGH

Key Lock:/RFNWKHEXWWRQVRQWKH79VHWZKHQ\RXWXUQRQWKHIXQFWLRQ

Page 18

OSD Menu

6. SETUP menu

Description

Software update(USB)

OSD Language: Allows you to select menu language.

TT Language: Allows you to select teletext language.

Audio Language: Allows you to select audio language.

Subtitle Language: Allows you to select subtitle language.

Hearing Impaired: Turn on/off the Hearing Impaired function.

PVR File System: Setup the PVR file system.

Note: The options PVR File System are described on pages 19 -20.

Aspect Ratio: Choose from 4:3, 16:9, Zoom1, Zoom2.

Blue Screen: Turn on/off the blue screen function when there’s no signal.

First Time Installation: Display the First Time Installation menu. SW INFORMATION: To show software information.

Reset: Press OK button to restore factory default. Software update(USB): Allows you to update the software from the USB.

Page 19

Multimedia Operation

Press / / / buttons to select and the OK button to activate the file or open folder. Press OK button to play the files in full screen mode. When in full screen mode press the OK button to show the option menu on the bottom of the screen or press stop button to return to files. Note: You can press RED button on the file to delete the file.

Basic Operation

2). Select the file type (mains menu) you want to view, and insert USB device, you will find the name of the device display on the screen.

3). Press / button to select the the USB device, and press OK button to enter.

1). Press the SORUCE button on the remote control to display the input source menu, select Media source by the / buttons, and press OK button to enter the Multimedia menu seen below.

MAINS MENU: PHOTO MUSIC MOVIE TEXT

Preview

Return to previous menu

Hints and informations of USB device

Information

Ĥĥ

EXIT

Page 20

Multimedia Operation

Display the playlist on the screen and play the file by / button and OK button, you can

Press / button to select the option on the menu, and press

1. Photo

2. Music

OK button to change. Pause: Play/pause the photo view. Prev./Next: View the previous/next photo. Stop: Stop the photo view. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Music: Play/Pause the music. Playlist: Display the playlist on the screen and play the file by / button and OK button, you can

press button to select “CANCEL”, and press OK button to cancel the list displaying.

Info: Display the information of the file. Rotate: Rotate the photo clockwise/counterclockwise. Zoom Out/In: Zoom out/in the photo. Move View: Move the photo in Zoom in mode.

Press / button to select the option on the menu, and press OK button to change. Pause: Play/pause the music. FB/FF: Fast backward/fast forward. Prev./Next: Play the previous/next file. Stop: Stop the music. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Mute: Mute the sound. Playlist:

press button to select “CANCEL”, and press OK button to cancel the list displaying or press the “list” button.

Info: Press “INFO” button to display the information of the file. Goto Time: Play the music from the time you set.

Photo viewing

Play the music

Ĥĥ

Page 21

Multimedia Operation

Press / button to select the option on the menu, and press

3. Movie

4. Text

OK button to change. Pause: Play/pause the music. FB/FF: Fast backward/fast forward. Prev./Next: Play the previous/next file. Stop: Stop the movie. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Set A-B: Select and play the preferable part of the file by setting A and B at the beginning and end. Press OK button to cancel. Playlist: Display the playlist on the screen. Info: Display the information of the movie. Slow Forward: Play the movies at slow speed, press button to cancel. Step Forward: Step quickly through the movie by using this option Goto Time: Program the movie form the time you set. Zoom out/in: Zoom out/in the movie screen. Aspect Ratio: Select the aspect ratio of the screen display. Move View: Move the photo in Zoom in mode.

Press / button to select the option on the menu, and press OK button to change. Previous/Next page: Turn to previous/next page of the text. Prev./Next: Turn to previous/next file. Stop: Stop auto turning pages. Music: Play/pause the music programme. Playlist: Display the playlist on the screen. Info: Display the information of the text.

Play the movie

View the text

Page 22

Recording Operation

PVR settings

Press the MENU button, select SETUP menu, and select “PVR File System”, then press OK button to enter the setting menu.

1. PVR File System

Note: You select a recorded programme, and press OK button to program. Note: You can delete a recorded programme by pressing the RED button on the list. Note: You can display the information of the recorded programme by pressing the GREEN button on the list.

Select Disk: Select the device for the Record files. Check PVR File System: Check the system. USB Disk: Display the USB state. Format: Format the USB device for PVR operating. Time Shift Size: Display the size of the USB device (The device has been formated). Speed: Display the speed of the USB device (The device has been formated). Free Record Limit: Display the Free Record Limit state.

2. Recorder

Please check whether your USB device works or not before recording.

Press REC LIST button on the remote control to display the recorder menu in DTV mode as below.

Page 23

Recording Operation

When you press REC button in DTV mode, the screen will display the recording menu as below:

Record and Time shift function buttons

1) Recording menu

2) Timeshift menu

REC: Press to start recording.

Note: a. display and exit the navigation menu by pressing the REC. b. Press STOP button to exit the recording mode. c. Press PLAY button to play the programme you are recording from the beginning.

Recording

PAUSE: Press to enter the timeshift mode, press play to play the recording.

Press PAUSE button to enter the Timeshift mode in DTV mode, and the picture will be paused, the recording will begin.

Stop: Press to stop recording or timeshift.

REC LIST: To display the recorder menu.

Note:

a. Press STOP button to exit the Timeshift mode. b. Press PLAY button to play the programme you are recording from the beginning.

Page 24

EPG menu

Display the programme guide by pressing the EPG button.

Display the information of the programme

Channel list

Options

Display the programme name

You can select a programme for recording using the / / / buttons. Record: Press RED button to display the Recorded Mode menu, and set the timer record. When

the programme starts it will be recorded to the USB device.

Display: Press GREEN button to display the information of the program.

Schedule: Press YELLOW button to display the schedule list.

Remind: Press BLUE button to display the remind menu, and set the time.

Timer Recorder: Press “REC” button on the programme to display the Timer Recorder menu:

When the programme

starts the TV will automatically switch to this programme.

Channel: Select the DTV channel you want to record. Start Time: Select the start recording time.

End Time: Select the end recording time.

MODE: Select the record mode.

Press OK button to save the setting and exit the menu, and there will be a hint on the screen.

Recorder(Set the timer record)

The TV will record the programme automatically according to your settings.

Page 25

DVD Operation

Press the Power button on the TV or the remote control, then press the SOURCE button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC".

Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player. To "Eject" the disc, press the EJECT button on the TV or the " " button on the remote control.

Insert Disc according to picture next to disc slot.

Audio

TV Display

4:3 Pan Scan This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown on the screen,but with some parts cut automatically.

4:3 Letter Box This is selected when the player is connected to a normal TV. Wide-screen images are shown on the screen,with black belt on the top and bottom.

Wide This is selected when the player is connected to a wide-screen TV.

General Setup Page - -

TV Display 16:9 4:3Pan Scan OSD Lang ENG 4:3/Letter Box Screen Saver off Wide Last Memory off

Page 26

DVD Operation

General Setup Page - -

TV Display 16:9 OSD Lang ENG Screen Saver off Last Memory off

General Setup Page - -

TV Display 16:9 OSD Lang ENG Screen Saver off Last Memory off Off

Page 27

DVD Operation

Page 28

DVD Operation

Spdif Setup

Spdif out

Spdif off Spdif /RAW is for amplifiers with a built in digital decoder. Spdif/PCM is selected for amplifiers with no built in digital decoder.

- - Spdif Setup Page - -

Setup Spdif

Spdif Output

Spdif Off Spdif/RAW Spdif/Pcm

Page 29

DVD Operation

or NO disc

Page 30

DVD Operation

Page 31

DVD Operation

Page 32

DVD Operation

Page 33

Simple Troubleshooting

If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance.

No power

- Check all connections to the TV.

- Press either the power button or the Standby button on the Remote control.

No picture or sound

- Ensure that the TV is plugged in and the power is on.

- Ensure that the aerial is connected.

- Try a different programme.

Poor picture quality

- Check the aerial connections.

- Check that the channel is tuned in properly.

- Adjust the picture settings:brightness,colour,sharpness,contrast,hue.

- Make sure that the TV is not located close to electrical appliances that may emit radio frequency interference.

No colour

- Adjust the colour setting.

- Check that the programme is broadcast in colour.

- Check that the cannel is tuned properly.

TV does not respond to remote control

- Check that there are no obstructions between the remote control and the unit.

- Check that the remote control is within range of the unit.

- Check that the batteries in the remote control and not weak or exhausted.

This LCD TV is for household use and registered as harmless on electromagnetic waves. Therefor,you can use it in every location as well as residential areas.

Page 34

Specifications

Maintenance and Service

535x165x396mm

535x48x360mm

12V 5A

60W

Technical ^ƉĞĐŝĮĐĂƟŽŶƐ – DŽĚĞů>ͲϮϯϲ>,Ͳ

Panel

LCD

Screen Size

24”

DisplayArea

477.417 (H) x 268.416 (V)

DisplayResŽůƵƟon

1920(H) x 1080(V)

ViewingAngle

170(H)/160(V) (CRı20)

Aspect ZĂƟo

16:9

Pixelpitch (H/V)

0.1165 (H) x 0.3495 (V)

Brightness

300 nits

Contrast

800:1

Response ƟŵĞ

5 ŵƐ(TR +TF)

Color Capacit

16.7M

Panel Type

TFT Liquid Crystal Display ŵŽĚƵůĞ with

CCFL Backlight unit

Panel

>ŝĨĞƟŵĞ of Backli

50,000hrs

TV sysƚĞŵs

PAL SECAM -BG /DK / I,

Band

UHF /VHF

Sound

Analog stereo, NICAM/A2

ATV

Teletext

1000 Pages Teletext

DVB standard

Fully coŵply with DVB-T and MPEG-

2,MPEG4,H.264 standard

Video decoder

MPEG-2 ,MPEG4 ,H.264

ĞŵŽĚƵůĂƟŽŶ

QPSK/16QAM/64QAM

OFDM

2K/8K

Bandwidth

7/8MHz

Teletext

ETSI/EN300472

DTV

Playback formats

DVD/CD/MP3/JPEG

Supported Media

DVD-R/RW CD-R/RW

System

PAL/NTSC

Semi-conductor Lase

Wave length 65ϬŶŵϳϴϬŶŵ

S/N

>89dB

DVD

Audio d

namic range

>80dB

RF-IN

75 ŽŚŵ ( IEC75 )

SCART ( Euro 21pin ) -IN

CVBS/RGB,L+R analog sound

Component Video-IN

YPbPrx1

VGA-IN

D-SUB 15 Pin * x 1

PC Audio-IN

HDMI-IN

Video-IN

L/R Audio-IN

Headphone out

Coax out

USB-For upgrade, PVR, Media

Power Power ĐŽŶƐƵŵpƟŽn

Connectors

Stand-b

ower ĐŽŶƐƵŵpƟŽn

<1W

ŝŵĞŶƟŽŶƐ

With Stand ( L/W/H ) Without stand ( L/W/H )

PC dŝŵŝŶŐ Supported: 640*480 60HZ 1360*768 60HZ 800*600 60HZ

1024*768 60HZ

Page 35

Service must be carried out by authorised personnel. Non-authorised service may result in warranty void. If there are any problems with the product, please see your retailer.

DOLBY PROLOGIC: Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.

ROVI: is item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.