How it Works
Launch Tech
Loading...
PADV
User Manual
130 pgs3.62 Mb0

Launch Tech PADV User Manual

User Manual
Version: V1.00.000
Revised date: 3-26-2018
Statement:
All information, specifications a latest information available at the time of release. LAUNCH reserves the rights to make changes at any time without notice.
nd illustrations in this manual are based on the
Copyright Information
Copyright © 2018 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this information as applied to other units.
Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.
Statement:LAUNCHownsthecompleteintellectualpropertyrightsforthesoftware usedbythisproduct.Foranyreverseengineeringorcrackingactionsagainstthe software,LAUNCHwillblocktheuseofthisproductandreservetherighttopursue theirlegalliabilities.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (LAUNCH) in China and other countries. All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact LAUNCH at www.launchusa.com, or write to LAUNCH Tech (USA), Inc., 1820 S. Milliken Ave. Ontario, CA 91761, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual.
i
Important Safety Precautions
Important: To avoid personal injury, property damage, or accidental damage to
the product, read all of the information in this section before using the product.
Never collide, throw, or puncture X-431 Throttle, and avoid falling, extruding
y
and bending it.
Do not insert foreign objects into or place heavy objects on your device.
y
Sensitive components inside might cause damage.
Do not use X-431 Throttle in exceptionally cold or hot, dusty, damp or dry
y
environments.
In places using X-431 Throttle may cause interference or generate a potential
y
risk, please turn it off.
X-431 Throttle is a sealed unit. There are no end-user serviceable parts
y
inside. All internal repairs must be done by an authorized repair facility or qualified technician. If there is any inquiry, please contact the dealer.
Never place X-431 Throttle into apparatus with strong electromagnetic field.
y
Keep X-431 Throttle far away from magnetic devices because its radiations
y
can damage the screen and erase the data stored on X-431 Throttle.
DANGER: Do not attempt to replace the internal rechargeable lithium battery.
y
Contact the dealer for factory replacement.
CAUTION: Please use the included battery and charger. Risk of explosion if
y
the battery is replaced with an incorrect type.
Do not disconnect power abruptly when X-431 Throttle is being formatted or
y
in process of uploading or downloading. Or else it may result in program error.
Do not delete unknown files or change the name of files or directories that
y
were not created by you, otherwise your X-431 Throttle software might fail to work.
Be aware that accessing network resources can leave your X-431 Throttle
y
vulnerable to computer viruses, hackers, spyware, and other malicious activities that might damage your device, software or data. It is your responsibility to ensure that you have adequate protection in the forms of firewalls, antivirus software, and anti-spyware software and keep such software up to date.
ii
Precautions on Using X-431 Throttle
Before using this test equipment, please read the following safety information carefully.
Always perform automotive testing in a safe environment.
y
If the diagnostic connector remains unused for a long period of time, it is
y
suggested to unplug the connector from vehicle’s DLC to conserve battery power.
Wear an ANSI-approved eye shield when testing or repairing vehicles.
y
The vehicle shall be tested in a well-ventilated work area, as engines produce
y
various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.)
Do not connect or disconnect any test equipment while the ignition is on or
y
the engine is running.
Put blocks in front of the drive wheels and never leave the vehicle unattended
y
while testing.
Keep the test equipment dry, clean, free from oil, water or grease. Use a mild
y
detergent on a clean cloth to clear the outside of the equipment as necessary.
Do not drive the vehicle and operate the test equipment at the same time.
y
Any distraction may cause an accident.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or
y
hot engine parts.
Before starting the engine, put the gear lever in the Neutral position (for
y
manual transmission) or in the Park (for automatic transmission) position to avoid injury.
To avoid damaging the test equipment or generating false data, please make
y
sure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
Automotive batteries contain sulfuric acid that is harmful to skin. In operation,
y
direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
Precautions on Operating Vehicle’s ECU
Do not disconnect battery or any wiring cables in the vehicle when the ignition
y
switch is on, as this could avoid damage to the sensors or the ECU.
Do not place any magnetic objects near the ECU. Disconnect the power
y
supply to the ECU before performing any welding operations on the vehicle.
iii
Use extreme caution when performing any operations near the ECU or
y
sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity.
When reconnecting the ECU harness connector, be sure it is attached firmly,
y
otherwise electronic elements, such as ICs inside the ECU, can be damaged.
iv
TABLE OF CONTENTS
1 INTRODUCTION .............................................................................................. 1
PRODUCT PROFILE ..................................................................................... 1
1.1
1.2
FEATURES .................................................................................................. 2
1.3
TECHNICAL SPECIFICATIONS ....................................................................... 3
1.3.1 X-431 Throttle handset ...................................................................... 3
1.3.2 VCI connector .................................................................................... 3
2 KNOWLEDGE OF X-431 THROTTLE ............................................................. 5
X-431 THROTTLE TABLET ............................................................................ 5
2.1
2.1.1 Top view ............................................................................................. 5
2.1.2 Front view .......................................................................................... 6
2.1.3 Rear view ........................................................................................... 7
2.2
DOCKING STATION ...................................................................................... 8
2.3
VCI CONNECTOR ........................................................................................ 8
2.4
PACKAGE LIST .......................................................................................... 10
3 PREPARATIONS ........................................................................................... 11
CHARGING X-431 THROTTLE .................................................................... 11
3.1
3.2
USING YOUR BATTERY .............................................................................. 11
3.3
POWER ON/OFF ......................................................................................... 11
3.3.1 Power on .......................................................................................... 11
3.3.2 Power off .......................................................................................... 12
3.4
TIPS ON FINGER OPERATIONS ................................................................... 12
LOCK & UNLOCK SCREEN ......................................................................... 12
3.5
3.5.1 Lock the screen ............................................................................... 12
3.5.2 Unlock the screen ............................................................................ 13
3.6
SCREEN LAYOUT ....................................................................................... 13
3.7
ADJUST BRIGHTNESS ................................................................................ 13
3.8
SET STANDBY TIME ................................................................................... 13
3.9
CHANGING LANGUAGE .............................................................................. 14
3.10
WI-FI SETUP ........................................................................................... 14
3.9.1 Connect to a Wi-Fi network ............................................................. 14
v
3.9.2 Disconnect from a Wi-Fi network .................................................... 14
4 INITIAL USE ................................................................................................... 15
GETTING STARTED .................................................................................... 15
4.1
4.2
REGISTER & DOWNLOAD DIAGNOSTIC SOFTWARE ..................................... 15
4.2.1 User registration .............................................................................. 15
4.2.2 Function modules ............................................................................ 18
4.2.3 Vehicle menu layout ........................................................................ 20
4.3
CONNECTIONS .......................................................................................... 21
4.3.1 Preparation ...................................................................................... 21
4.3.2 DLC location .................................................................................... 21
4.3.3 Vehicle connection ........................................................................... 22
4.4
COMMUNICATION SETUP ........................................................................... 23
4.4.1 Pairing up via wireless (BT) communication ................................... 23
4.4.2 USB cable connection ..................................................................... 24
5 DIAGNOSIS ................................................................................................... 25
INTELLIGENT DIAGNOSIS (AUTODETECT) ................................................... 25
5.1
5.2
MANUAL DIAGNOSIS .................................................................................. 30
5.2.1 Health Report (Quick Test) .............................................................. 32
5.2.2 System Scan.................................................................................... 34
5.2.3 System Selection ............................................................................. 35
5.3
TECH TO TECH (REMOTE DIAGNOSIS) ....................................................... 42
5.3.1 Interface layout ................................................................................ 43
5.3.2 Add Friends...................................................................................... 43
5.3.3 Start instant messaging ................................................................... 45
5.3.4 Launch remote diagnosis (Device-To-Device) ................................ 46
5.3.5 Launch remote diagnosis (Device-To-PC) ...................................... 49
5.4
MANAGE REPORTS ................................................................................... 52
5.4.1 Health Report................................................................................... 52
5.4.2 Remote Report ................................................................................ 52
5.4.3 Playback .......................................................................................... 52
5.5
I/M READINESS ......................................................................................... 53
5.6
HOW TO VIEW DIAGNOSTIC HISTORY? ...................................................... 55
vi
DIAGNOSTIC FEEDBACK ............................................................................ 55
5.7
5.8
VIEW REPAIR INFORMATION ...................................................................... 56
6 SOFTWA RE UP DATE ................................................................................... 58
UPDATE DIAGNOSTIC SOFTWARE & APP................................................... 58
6.1
6.2
RENEW SOFTWARE SUBSCRIPTION ............................................................ 59
7 PROFILE ........................................................................................................ 60
PROFILE ................................................................................................... 60
7.1
7.2
EMAIL ....................................................................................................... 60
7.3
CHANGE PASSWORD ................................................................................. 60
7.4
FREE UPGRADE PERIOD ........................................................................... 60
7.5
ABOUT ...................................................................................................... 60
7.6
EXIT FROM CURRENT ACCOUNT ................................................................. 61
8 SETTINGS ...................................................................................................... 62
GENERAL .................................................................................................. 62
8.1
8.1.1 Units of Measurement ..................................................................... 62
81.2 Expiration Reminder ......................................................................... 62
8.1.3 Identifix Settings .............................................................................. 62
8.1.4 Auto Update ..................................................................................... 62
8.2
VCI ........................................................................................................... 62
8.3
VCI MANAGEMENT .................................................................................... 62
8.4
ACTIVATE VCI ........................................................................................... 63
8.5
FIRMWARE FIX .......................................................................................... 63
8.6
ICON SIZE ................................................................................................. 63
8.7
COLOR THEME .......................................................................................... 63
8.8
PRINTER SET ............................................................................................ 63
8.9
PRINT INFORMATION ................................................................................. 65
8.10
DATA STREAM SAMPLE ........................................................................... 65
VEHICLE VOLTAGE .................................................................................. 65
8.11
8.12
DIAGNOSTIC SOFTWARE CLEAR .............................................................. 65
8.13
BACKUP/RESTORE .................................................................................. 66
9 SENSORBOX (TOOLBOX) ........................................................................... 67
vii
PRODUCT SUMMARY ................................................................................. 67
9.1
9.2
STRUCTURE & ACCESSORIES .................................................................... 68
9.2.1 Sensorbox structure ........................................................................ 68
9.2.2 Sensorbox accessories ................................................................... 69
9.3
SENSOR SIMULATION ................................................................................ 70
9.3.1 Connections ..................................................................................... 70
9.3.2 Simulation test ................................................................................. 70
9.3.3 Precautions on checking vehicle sensor ......................................... 74
10 MULTIMETER (TOOLBOX) ......................................................................... 76
MAIN MENU ............................................................................................ 76
10.1
10.2
TEST SAMPLE ......................................................................................... 77
11 BATTERYBOX (TOOLBOX) ........................................................................ 79
PRODUCT SUMMARY ............................................................................... 79
11.1
11.2
TEST ENVIRONMENT ............................................................................... 80
11.2.1 Test environment ............................................................................ 80
11.2.2 Battery status and description ....................................................... 80
11.3
BATTERYBOX STRUCTURE & ACCESSORIES ............................................ 81
11.3.1 Batterybox structure ....................................................................... 81
11.3.2 Test accessories ............................................................................ 81
11.4.
CONNECTIONS & OPERATIONS ............................................................... 81
11.4.1 Connection ..................................................................................... 81
11.4.2 Inside the vehicle test .................................................................... 82
11.4.3 Outside the vehicle test ................................................................. 85
11.5
PRECAUTIONS ON BATTERY TEST ........................................................... 85
12 OSCILLOSCOPE (TOOLBOX) .................................................................... 87
INTRODUCTION ....................................................................................... 87
12.1
12.2
STRUCTURE & ACCESSORIES .................................................................. 88
12.2.1 Scopebox structure ........................................................................ 88
12.2.2 Scopebox accessories ................................................................... 89
12.3
CONNECTION & INITIAL USE .................................................................... 90
12.3.1 Connection..................................................................................... 90
12.3.2 Initial interface introduction ............................................................ 90
viii
OPERATIONS .......................................................................................... 91
12.4
12.4.1 Channel selection and attributes setting ....................................... 91
12.4.2 Auto ................................................................................................ 96
12.4.3 View Settings ................................................................................. 96
12.4.4 Measure ......................................................................................... 97
12.4.5 File management ........................................................................... 99
12.4.6 Expert reference .......................................................................... 100
13 AUTOMOTIVE IGNITION WAVEFORM .................................................... 102
13.1
SECONDARY-DISTRIBUTOR IGNITION ANALYSIS ...................................... 102
13.2
SECONDARY-SIMULTANEOUS IGNITION ANALYSIS ................................... 104
13.3
SECONDARY-DIRECT IGNITION ANALYSIS ............................................... 106
13.4
WAVEFORM ANALYSIS MODE ................................................................. 107
14 OTHERS ..................................................................................................... 113
EMAIL ................................................................................................... 113
14.1
14.1.1 Configure an email account ......................................................... 113
14.1.2 Add an email account .................................................................. 113
14.2
BROWSER ............................................................................................. 113
14.2.1 Open browser .............................................................................. 113
14.2.2 Download files ............................................................................. 114
14.3
SYNCHRONIZATION ............................................................................... 114
14.3.1 Connect to PC ............................................................................. 114
14.3.2 Run on PC ................................................................................... 114
14.3.3 Install an application .................................................................... 115
14.4
CLEAR CACHE ...................................................................................... 115
15 FAQ ............................................................................................................ 116
ix
LAUNCH X-431 Throttle User Manual
1 Introduction
1.1 Product Profile
X-431 Throttle is an evolutionary smart solution for specialized automotive diagnosis and maintenance. It is characterized by featuring powerful functions, and providing precise test result.
Through simple Bluetooth communication / USB cable between the VCI device and X-431 Throttle handset, it achieves full car model and full system vehicle trouble diagnosis, which include Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test and Special Functions.
X-431 Throttle adopts a higher performance-price ratio tablet, which is equipped with Android 7.1 operating system, 8-core 2GHz CPU and 10.1” sunlight readable capacitive touch screen with a resolution of 1920 x 1200 pixels.
The following illustration shows how the X-431 Throttle system works.
1
LAUNCH X-431 Throttle User Manual
1.2 Features
1. Diagnose:
Smart Diagnosis (AutoDetect): This module allows you to use the VIN
y
information of the currently identified vehicle to access its data (including vehicle information, historical diagnostic records) from the cloud server to perform quick test.
Local Diagnosis: To perform diagnosis by executing on-screen commands
y
step by step. Diagnosis functions include: Read DTCs, Clear DTCs, Read Data Stream, Special Functions etc.
I/M Readiness: I/M refers to Inspection and Maintenance that is legislated by
y
the Government to meet federal clean-air standards. I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
Tech-To-Tech: This option aims to help repair shops or technicians launch
y
instant messaging and remote diagnosis, making the repair job getting fixed faster.
Maintenance & Reset: All kinds of common maintenance and reset items
y
including Oil lamp reset, DPF regeneration, ABS bleeding etc. can be done.
Diagnostic History: Provides a quick access to the tested vehicles and users
y
can choose to view the test report or resume from previous diagnostic session, without the necessity of starting from scratch.
Pre- and Post- Repair Result Comparison: By comparing the pre-repair and
y
post-repair report, you can clearly determine which vehicle issues have been fixed and which remained unsolved.
One-click Update: Lets you update your diagnostic software online.
y
Diagnostic feedback: Enables you to submit the vehicle issue to us for
y
analysis and troubleshooting.
Repair Info: Multiple speed dial to professional repair website are available for
y
helping repair professionals diagnose and repair vehicle efficiently, accurately and profitably.
Vehicle Coverage: Enables you to quickly check which vehicle models are
y
supported.
Backup/Restore: This feature lets you back up the recorded files to external
y
storage device/restore the recorded data from external storage device.
Add-on Modules: Scopebox, Sensorbox, Batterybox and Videoscope (sold
y
separately) are available for extending the functions of X-431 Throttle.
2
LAUNCH X-431 Throttle User Manual
2. Compatible with Wi-Fi projecting technology: To mirror your X-431 Throttle screen onto an external projector or monitor with HD I/O interface via wireless technology.
3. Web browser: Users can make online search and visit any website.
1.3 Technical Specifications
1.3.1 X-431 Throttle handset
Operating system Android 7.1
Processor 8-core 2GHz processor
Battery
Memory 4GB
Storage 64GB
Screen
Camera
Connectivity
Sensor
Working temperature
9000mAh rechargeable polymer lithium battery Charging via 5V DC power supply
10.1 inch capacitive touch screen with a resolution of 1920 x 1200 pixels
Front-facing 8.0MP camera + rear-facing 13MP camera
y WLAN (802.11b/g/n/ac)
y Universal serial BUS Ports (1 x Type-C + 1 x
Type-A)
y Bluetooth 2.1 & 2.4
y Gravity Accelerometer y 3-Axis Acceleration Sensor
-10℃ ~ 50℃(14 ~122℉)
Storage temperature
1.3.2 VCI connector
Working voltage DC 9 ~18V
Average working current About 35mA
-20℃ ~ 70℃(-4 ~158℉)
3
LAUNCH X-431 Throttle User Manual
Standby current About 25mA
Working temperature
-20℃ to 55℃(-4 ~131℉)
Storage temperature
-30℃ to 70℃(-22~158℉)
4
LAUNCH X-431 Throttle User Manual
r
2 Knowledge of X-431 Throttle
There are three main components to the X-431 Throttle system:
y X-431 Throttle tablet – the central processor and monitor for the system (See
Chapter “2.1”)
y Docking Station – the platform for charging X-431 Throttle tablet and
extending functions (For details, please refer to Chapter 2.2.)
y VCI device – the device for accessing vehicle data (See Chapter “2.3”)
2.1 X-431 Throttle tablet
The handset acts as the central processing system, which is used to receive and analyze the live vehicle data from the VCI connector and then output the test result.
2.1.1 Top view
Fig. 2-1
Memory Card Slot
1
Charging Po
2
Power/Screen
3
Lock Button
Volume Buttons
4
t
To store the memory card for storage expansion.
Reserved for charging the handset.
To turn the handset on/off with long press, or lock the screen with short press.
To adjust the volume.
*Note: Press and hold [POWER] and [VOL -] key to
5
LAUNCH X-431 Throttle User Manual
capture the current screenshot.
Data
5
Transmission Port
2.1.2 Front view
Reserved for add-on modules (such as Batterybox, Scopebox and Sensorbox), and other devices with similar port.
Fig. 2-2
Microphone
6
Charging indicator
7
To adjust the volume.
It illuminates red while the handset is charging. Once charging is finished, it will illuminate solid green.
Touch Screen
8
Ambient Light
9
Sensor Front Camera
10
6
LAUNCH X-431 Throttle User Manual
r
2.1.3 Rear view
Fig. 2-3
Rear Camera
11
Camera Flash
12
Audio Speake
13
Charging Slot
14
Adjustable
15
Kickstand
Align it with the charging slot on the docking station to charge the handset.
Flip out it to any angle and work comfortable at your desk, or hang it on automotive part.
7
LAUNCH X-431 Throttle User Manual
2.2 Docking Station
Fig. 2-4
Charging Slot
1
OBD16 Socket
2
Data
3
Transmission Port
Charging Port
4
Power LED
5
To store the VCI device to avoid loss.
Reserved for add-on modules, and other devices with similar port.
Use the power adaptor to supply power to the docking station through connection to AC outlet.
Illuminates solid green when it is powered up.
2.3 VCI Connector
The VCI connector works as a vehicle communication interface device, which is used to connect to the vehicle’s DLC (Data Link Connector) socket directly or via OBD II extension cable to read the vehicle data and then send it to the X-431 Throttle handset via wireless communication technology.
8
LAUNCH X-431 Throttle User Manual
Fig. 2-5 VCI connector
OBD-16 diagnostic
1
connector
Power indicator
2
Wireless (BT)/data cable
3
communication indicator
ECU communication
4
indicator Data Transmission
5
port
To connect on vehicle’s OBD II DLC.
It lights up while the connector is plugged into the vehicle’s DLC.
y It indicates wireless (BT) communication
mode if the VCI is energized and illuminates blue (default mode).
y It illuminates red when the VCI is connected to
the diagnostic tool via data cable.
It flashes when the VCI is communicating with the vehicle.
To connect to the handset to perform vehicle diagnosis via data cable.
9
LAUNCH X-431 Throttle User Manual
2.4 Package List
For different product configurations, the accessories may vary. For detailed accessory items, please consult from the local agency or check the package list supplied with X-431 Throttle together.
No. Item Descriptions Qt.
X-431 Throttle
1
handset
2 Docking station To dock or charge the handset. 1
Indicates the test result. 1
VCI device
3
OBD II extension
4
cable
5 Power adaptor To charge the handset. 1
6 OBD I adaptor
Cigarette lighter
7
cable
Battery clamps
8
cable
Password envelope
9
Non-16pin adaptor
10
cable kit
Collects the vehicle data and sends it to the handset for analysis.
To connect the VCI device to the OBD II vehicle’s DLC.
An adaptor cable for connecting non-16 pin connector.
To supply power to the non-16pin connector from the vehicle’s cigarette lighter receptacle.
To supply power to the non-16pin connector through connection to the vehicle’s battery.
A piece of paper bearing the product Serial Number and Activation Code for product registration.
To connect to the vehicle equipped with non-OBD II management system.
(Optional)
1
1
1
1
1
1
10
LAUNCH X-431 Throttle User Manual
3 Preparations
3.1 Charging X-431 Throttle
Choose any of the followings to charge your handset:
A. Use the included 5V power adaptor: Connect one end of the power adaptor to
Type C charging port of the handset, and the other end to the AC outlet. Never use other similar adaptors to charge it.
B. Use the docking station: Follow the steps described as below to charge your
handset:
1. Locate the charging slot on the bottom of the handset and docking station.
2. Align the charging slots, and then dock the tablet into the station to ensure that it is firmly seated on the docking station.
3. Insert one end of the included power cord to the charging port of the docking station, then the other end into the AC outlet. The charging LED illuminates solid red while charging.
4. Once it illuminates solid green, it indicates that the battery is fully charged. Disconnect the docking station from the AC outlet.
3.2 Using Your Battery
If the battery remains unused for a long period of time or the battery is
completely discharged, it is normal that the tool will not power on while being charged. Please charge it for a period of 5 minutes and then turn it on.
Please use the included power adaptor to charge your tool. No responsibility
can be assumed for any damage or loss caused as a result of using power adaptors other than the one supplied.
While X-431 Throttle has low battery, a beep will sound. If it is very low, X-431
Throttle will be switched off automatically.
3.3 Power on/off
3.3.1 Power on
Press [POWER] to turn the tool on.
*Note: If it is the first time you have used this tool or the tool remains idle for a long period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5
11
LAUNCH X-431 Throttle User Manual
minutes and attempt to turn on again.
3.3.2 Power off
Press [POWER] for 3 seconds, an option menu will pop up on the screen. Tap “Power off” to turn the tool off.
To perform a forced shutdown, press [POWER] for more than 8 seconds until the screen goes dark.
3.4 Tips on Finger Operations
Single-tap: To select a item or launch a program.
Double-tap: To zoom in so that the text on a webpage appears in a
column that fits your device’s screen. Long press: Tap and hold on the current interface or area until a
contextual menu pops up on the screen, and then release it.
Slide: To jump to different pages.
Drag: Tap the desktop icon and drop it to other location.
Spread apart/pinch together: To zoom in manually, place two
fingers on the screen and then spread them apart. To zoom out, place two fingers apart on the screen and then pinch them together.
3.5 Lock & Unlock Screen
Many screen lock modes are available on X-431 Throttle.
*Note: You are recommended to set screen lock as “None” since X-431 Throttle is a frequently used diagnostic tool.
3.5.1 Lock the screen
When it is ON, press [POWER] once to lock the screen;
The system will lock the screen automatically after X-431 Throttle remains
idle over the preset standby time.
12
LAUNCH X-431 Throttle User Manual
3.5.2 Unlock the screen
Press [POWER] to activate the screen and drag the
*Note: If you define as unlock using the pattern, you have to draw the right target pattern to unlock it.
lock to “Unlock” position.
3.6 Screen Layout
1. Preview the screen
Tap and hold any blank area on the home screen, a function menu will pop up at the bottom of the screen. It mainly includes wallpapers, lock screen wallpapers, widgets, settings and apps.
2. On-screen buttons
There are 6 on-screen buttons available on the bottom of the screen.
y Back: Tap
to return to the previous screen.
y Home: Tap
y Recent App: Tap
applications.
y Screenshot: Tap y Downloadable: Once some upgradable diagnostic software is detected, the
icon
y VCI Connection
not.
to jump to the Android’s home screen.
to view the recently launched applications and running
to capture the current screen.
will turn highlighted.
: Shows whether the VCI device is properly connected or
3.7 Adjust Brightness
Tips: Reducing the brightness of the screen is helpful to save the power of X-431 Throttle.
1. On the home screen, tap Settings -> Display -> Brightness level.
2. Drag the slider to adjust it.
3.8 Set Standby Time
If no activities are made within the defined standby period, the screen will be locked automatically and the system enters sleep mode to save power.
13
LAUNCH X-431 Throttle User Manual
1. On the home screen, tap Settings -> Display -> Sleep.
2. Choose the desired sleep time.
3.9 Changing Language
X-431 Throttle supports multiple languages.
To change the language of the handset, please do the following:
1. On the home screen, tap Settings -> Languag e & Input -> Languages.
2. Tap “Add a language”, and then choose the desired language from the list.
3. Tap and hold the desired language and drag it to the top of the screen and then release it, the system will change into the target language.
3.10 Wi-Fi Setup
Note: Once WLAN is set as ON, X-431 Throttle will consume more power. While
WLAN keeps unused, please turn it off to conserve battery power.
X-431 Throttle has a built-in Wi-Fi module that can be used to get online. Once you’re online, you can register your X-431 Throttle, update the diagnostic software & APK, surf the Internet, get apps and send email on your network.
3.9.1 Connect to a Wi-Fi network
1. On the home screen, tap
2. Tap or slide the Wi-Fi switch to ON, X-431 Throttle starts searching for all available wireless LANs.
3. Choose the desired Wi-Fi access point / network,
If the network you chose is open, you can connect directly;
y
If the selected network is encrypted, you have to enter the right security
y
key (network password).
Once it is connected successfully, tap the Wi-Fi network from the list to view its name, link speed, security type, IP address etc.
3.9.2 Disconnect from a Wi-Fi network
1. On the home screen, tap
2. Tap the network with a
Settings
Settings
Connected
->
->
status, then tap “Disconnect”.
WLAN
WLAN
.
.
14
LAUNCH X-431 Throttle User Manual
4 Initial Use
4.1 Getting Started
For new users, please follow the operation chart shown in Fig. 4-1 to start using X-431 Throttle.
Fig. 4-1
Note*: If “VIN Scan” function is performed, this step shall not apply.
4.2 Register & Download Diagnostic Software
4.2.1 User registration
On the home screen, tap the application icon to launch it, a dialog box similar to the following will pop up on the screen:
15
LAUNCH X-431 Throttle User Manual
Fig. 4-2
A. If you are a new user, tap “New Customer” in Fig. 4-2 to start your sign-up.
Fig. 4-3
a) Create App Account: In Fig. 4-3, fill in the information in each field (Items
with * must be filled). After inputting, tap “Register”, a screen similar to the following will appear:
Fig. 4-4
b) Activate VCI: In Fig. 4-4, input the Serial Number and Activation Code,
16
LAUNCH X-431 Throttle User Manual
which can be found in the password envelope.
Product SN
Product SN
Activation code
Note: To exit and activate it later, tap “Skip”. In this case, you can activate it by tapping “Activate VCI” in “Settings”.
Tap “Activate” to finish your registration. See Fig. 4-6.
c) Finish Registration: To download the diagnostic software, tap “Yes” to
navigate to the download page. Tap “No” to download and install it later.
On the download page, tap “Update” to start downloading. To pause downloading, tap “Stop”. To resume it, tap “Continue”. Once download is complete, the system will install the software package automatically.
In process of download, please make sure the tablet has a strong Wi-Fi
Note:
signal. It may take several minutes to finish it, please be patient to wait.
B. If you have registered to be a member, tap “Existing Customer” in Fig. 4-2, a
screen similar to the following appears:
Fig. 4-5
Fig. 4-6
17
LAUNCH X-431 Throttle User Manual
Fig. 4-7
(If you have registered to be a member, go to
to login the system directly.)
a)
(In case you forgot password, refer to b) to reset a new password.)
a) If you have registered to be a member, input your name and password,
and then tap the “Login” button to enter the main menu screen directly.
The X-431 Throttle has an auto-save function. Once the username and
Note:
password are correctly entered, the system will automatically store it. Next time you login the system, you will not be asked to input the account manually.
b) If you forgot the password, tap “Retrieve password” and then follow
on-screen instructions to set a new password.
4.2.2 Function modules
There are two function modules available on the X-431 Throttle: and
Toolbox
Diagnostics
. Swipe the screen in from left/right to toggle between them.
mainly includes the following items:
Diagnostics
Fig. 4-8
18
LAUNCH X-431 Throttle User Manual
Name Description
Diagnose
I/M Readiness
Software Upgrade
Tech-To-Tech
Reports
Diag. Feedback
Repair Info
Profile
Vehicle Coverage
Diagnostic History
Settings
Help
To configures X-431 Throttle to operate as a diagnostic tool.
I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
To update vehicle diagnostic software and APK.
This option aims to help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster.
To manage saved diagnostic reports and records.
To feed back the recent 20 diagnostic logs to us for issue analysis.
Provides quick access to various authorized automotive repair database.
To manage personal information.
To view all the vehicle models that the X-431 Throttle covers.
Generally once a vehicle diagnosis is performed, X-431 Throttle will automatically record every details of diagnostic session. This function provides a quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.
To make some general system settings, activate VCI, configure printer and print information, clear diagnostic software and backup/restore etc.
Includes FAQ, Quick Start Guide and User Manual.
19
LAUNCH X-431 Throttle User Manual
Toolbox
mainly includes the following add-on modules:
Name Description Videoscope Oscilloscope/
Ignition Sensor
Multimeter
Fig. 4-9
To check unseen or unreachable parts or components.
To determine vehicle electrical equipment and circuit trouble.
To diagnose/simulate vehicle ECU sensor trouble.
To measure physical parameters such as voltage, resistance, frequency etc.
*Note: The function utilizes the same hardware device as the sensor module.
Battery
To test whether vehicle's battery is good or not.
4.2.3 Vehicle menu layout
After downloading the diagnostic software, you can go to “Diagnose” to check if all software are completely downloaded and installed.
Tap “Diagnose”, a screen similar to the following figure appears:
Fig. 4-10
20
Loading...
+ 100 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use