How it Works
Launch
Loading...
X-431 PRO MINI
User Manual
47 pgs935.34 Kb0

Launch X-431 PRO MINI User Manual

Version: V1.00.000
Revised date: 2016-11-14
https://obd2.market
LAUNCH X-431 PRO MINI User Manual
i
Copyright Information
Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use o f any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Product s by LAUNCH.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called LAUNCH for short) in China and other countries. All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of LAUNCH or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact LAUNCH by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH. CO., LTD.，Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual.
LAUNCH X-431 PRO MINI User Manual
ii
Important Safety Precautions
Important: To avoid personal injury, property damage, or accidental damage to
the product, read all of the information in this section before using the product.
y
Never collide, throw, or puncture X-431 PRO MINI, and avoid falling,
extruding and bending it.
y
Do not insert foreign objects into or place heavy objects on your device.
Sensitive components inside might cause damage.
y
Do not use X-431 PRO MINI in exceptionally cold or hot, dusty, damp or dry
environments.
y
In places using X-431 PRO MINI may cause interference or generate a
potential risk, please turn it off.
y
X-431 PRO MINI is a sealed unit. There are no end-user serviceable parts
inside. All internal repairs must be done by an authorized repair facility or qualified technician. If there is any inquiry, please contact the dealer.
y
Never place X-431 PRO MINI into apparatus with strong electromagnetic
field.
y
Keep X-431 PRO MINI far away from magnetic devices because its
radiations can damage the screen and erase the data stored on X-431 PRO MINI.
y
DANGER: Do not attempt to replace the internal rechargeable lithium battery.
Contact the dealer for factory replacement.
y
CAUTION: Please use the included battery and charger. Risk of explosion if
the battery is replaced with an incorrect type.
y
Do not disconnect power abruptly when X-431 PRO MINI is being formatted
or in process of uploading or downloading. Or else it may result in program error.
y
Do not delete unknown files or change the name of files or directories that
were not created by you, otherwise your X-431 PRO MINI software might fail to work.
y
Be aware that accessing network resources can leave your X-431 PRO MINI
vulnerable to computer viruses, hackers, spyware, and other malicious activities that might damage your device, software or data. It is your responsibility to ensure that you have adequate protection in the forms of firewalls, antivirus software, and anti-spyware software and keep such software up to date.
Precautions on Using X-431 PRO MINI
Before using this test equipment, please read the following safety information carefully.
LAUNCH X-431 PRO MINI User Manual
iii
y
Always perform automotive testing in a safe environment.
y
If the VCI module remains unused for a long period of time, it is suggested to
unplug the connector from vehicle’s DLC to conserve battery pow er.
y
Wear an ANSI-approved eye shield when testing or repairing vehicles.
y
The vehicle shall be tested in a well ventilated work area, as engines produce
various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.)
y
Do not connect or disconnect any test equipment while the ignition is on or
the engine is running.
y
Put blocks in front of the drive wheels and never leave the vehicle unattended
while testing.
y
Keep the test equipment dry, clean, free from oil, water or grease. Use a mild
detergent on a clean cloth to clear the outside of the equipment as necessary.
y
Do not drive the vehicle and operate the test equipment at the same time.
Any distraction may cause an accident.
y
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or
hot engine parts.
y
Before starting the engine, put the gear lever in the Neutral position (for
manual transmission) or in the Park (for automatic transmission) position to avoid injury.
y
To avoid damaging the test equipment or generating false data, please make
sure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
y
Automotive batteries contain sulfuric acid that is harmful to skin. In operation,
direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
Precautions on Operating Vehicle’s ECU
y
Do not disconnect battery or any wiring cables in the vehic le when the ignition
switch is on, as this could avoid damage to the sensors or the ECU.
y
Do not place any magnetic objects near the ECU. Disconnect the power
supply to the ECU before performing any welding operations on the vehicle.
y
Use extreme caution when performing any operations near the ECU or
sensors. Ground yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by static electricity.
y
When reconnecting the ECU harness connector, be sure it is attached firmly,
otherwise electronic elements, such as ICs inside the ECU, can be damaged.
LAUNCH X-431 PRO MINI User Manual
iv
TABLE OF CONTENTS
1.1 P
RODUCT PROFILE ................................................................................... 1
1.2 F
EATURES ................................................................................................ 1
1.3 K
NOWLEDGE OF X-431 PRO MINI ............................................................ 2
1.3.1 X-431 PRO MINI whole set ................................................................ 2
1.3.2 X-431 PRO MINI handset ................................................................... 2
1.3.3 VCI module (Only applies for 12V cars) ............................................. 4
1.4 T
ECHNICAL PARAMETERS ......................................................................... 4
1.5 P
ACKAGE LIST .......................................................................................... 5
2.1
CHARGING X-431 PRO MINI ....................................................................... 6
2.2
USING YOUR BATTERY .................................................................................. 6
2.3
POWER ON/OFF ............................................................................................ 6
2.3.1 Power on ............................................................................................. 6
2.3.2 Power off ............................................................................................. 6
2.4
TIPS ON FINGER OPERATIONS ....................................................................... 6
2.5
LOCK & UNLOCK THE SCREEN ...................................................................... 7
2.5.1 Lock the screen .................................................................................. 7
2.5.2 Unlock the screen ............................................................................... 7
2.6
SCREEN LAYOUT .......................................................................................... 8
2.7
NOTIFICATION PANEL ................................................................................... 8
2.8
CUSTOMIZE YOUR DESKTOP ......................................................................... 8
2.8.1 Create a widget on the desktop .......................................................... 8
2.8.2 Move items on the desktop ................................................................ 8
2.8.3 Delete items from the desktop ............................................................ 8
2.8.4 Adjust brightness ................................................................................ 8
2.8.5 Set standby time ................................................................................. 8
2.9
SET SCREEN LOCK ....................................................................................... 9
3 WI-FI SETTING ............................................................................................... 10
3.1
CONNECT TO A WI-FI NETWORK ................................................................. 10
3.2
DISCONNECT FROM A WI-FI NETWORK ....................................................... 10
LAUNCH X-431 PRO MINI User Manual
v
4.1
DIAGNOSIS FLOWCHART ............................................................................ 11
4.2
INITIAL USE ................................................................................................ 11
4.2.1 User registration ............................................................................... 1 1
4.2.2 Diagnostic software layout ................................................................ 15
4.2.3 Function menu .................................................................................. 15
4.3
CONNECTIONS ........................................................................................... 16
4.3.1 Preparation ....................................................................................... 16
4.3.2 DLC location ..................................................................................... 16
4.3.3 V ehicle connection ............................................................................ 17
4.4
BLUETOOTH SETTING ................................................................................. 18
4.5
START DIAGNOSING ................................................................................... 18
4.5.1 Read DTC ......................................................................................... 20
4.5.2 Clear fault memory ........................................................................... 22
4.5.3 Read Data Stream ............................................................................ 22
4.5.4 Special Function ............................................................................... 24
4.5.5 How to view History? ........................................................................ 24
4.6
SPECIAL (RESET) FUNCTION ...................................................................... 25
4.6.1 Oil Reset Service .............................................................................. 25
4.6.2 Steering Angle Calibration ................................................................ 25
4.6.3 Electronic Parking Brake Reset ........................................................ 25
4.6.4 Electronic Throttle Position Reset/Learn .......................................... 26
4.6.5 Battery Register/Battery Maintenance .............................................. 26
4.6.6 ABS Bleeding .................................................................................... 26
4.6.7 Tire Pressure Monitor System Reset ................................................ 27
4.6.8 Diesel Particulate Filter (DPF) Regeneration ................................... 27
4.7
REMOTE DIAGNOSIS .................................................................................. 27
4.7.1 Interface Layout ................................................................................ 28
4.7.2 How to launch a remote diagnosis? ................................................. 28
4.8
SOFTWARE UPDATE ................................................................................... 29
4.9
MAINTENANCE HELP .................................................................................. 29
4.10
PERSONAL CENTER ................................................................................. 29
4.10.1 My Report ....................................................................................... 29
4.10.2 My Connector ................................................................................. 30
4.10.3 Activate Connector ......................................................................... 30
4.10.4 Firmware fix .................................................................................... 30
LAUNCH X-431 PRO MINI User Manual
vi
4.10.5 Diagnostic Feedback ...................................................................... 30
4.10.6 Profile .............................................................................................. 30
4.10.7 Change Password .......................................................................... 30
4.11
SETTINGS ................................................................................................ 30
4.11.1 Units of Measurement ..................................................................... 31
4.11.2 Print Information.............................................................................. 31
4.11.3 Launch wireless printer connection ................................................ 31
4.11.4 Network Test ................................................................................... 33
4.1 1.5 About ............................................................................................... 33
4.11.6 Exit .................................................................................................. 33
5.1
EMAIL ........................................................................................................ 34
5.1.1 Configure an email account .............................................................. 34
5.1.2 Add an email account ....................................................................... 34
5.2
BROWSER .................................................................................................. 34
5.2.1 Open browser ................................................................................... 34
5.2.2 Download files .................................................................................. 35
5.3
SYNCHRONIZATION .................................................................................... 35
5.3.1 Connect to PC .................................................................................. 35
5.3.2 Run on PC ........................................................................................ 35
5.3.3 Install an application ......................................................................... 35
5.4
CLEAR CACHE ........................................................................................... 36
LAUNCH X-431 PRO MINI User Manual
1
1 Introductions
1.1 Product Profile
X-431 PRO MINI is a stylish Android-based vehicle trouble diagnostic tool. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Through the simple Bluetooth communication between the VCI module and X-431 PRO MINI, it achieves full car model and full system vehicle trouble diagnosis, which includes Reading DTCs, Clearing DTCs, Rea ding Data Stream , Actuation Test and Special Functions.
Moreover, it supports Wi-Fi connection, which enables you surf the Internet, update the diagnostic software online and perform remote diagnosis etc, getting your job fixed faster and easier.
1.2 Features
1. Diagnostic Tool:
A. Diagnose
Diagnose the electronic control system of prevailing vehicle models
covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCs, Clear DTCs, Read data stream, Special functions etc.
Specially designed for Android platform with clear and user-friendly
interface.
Via Bluetooth, it is simple for the VCI module to communicate with X-431
PRO MINI.
Equipped with an exclusive X-431 PRO MINI protective sleeve to prevent
it from being damaged.
B. One-click Update
: lets you update your diagnostic software more
efficiently.
C. Repair Data
: provides abundant automotive handbook, repair case and
wiring diagrams for reference and retrieval.
D. Remote Diagnosis
: configures X-431 PRO MINI as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.
2. Browser: built-in Wi-Fi module makes surfing on the internet freely.
3. Email: allows you to send and receive emails.
LAUNCH X-431 PRO MINI User Manual
2
4. Settings: to configure your personalized X-431 PRO MINI through it.
5. Applications: other android based applications can be customized to install or uninstall.
1.3 Knowledge of X-431 PRO MINI
1.3.1 X-431 PRO MINI whole set
X-431 PRO MINI is mainly composed of an X-431 PRO MINI handset, and a DBSCar II VCI module.
1.3.2 X-431 PRO MINI handset
Fig. 1-1 X-431 PRO MINI handset
LAUNCH X-431 PRO MINI User Manual
3
1
V
CI module
2
Reset hole
3
Rear camera
4
Camera flash
5
Slot for VCI module
For housing the VCI module.
6
POWER/Screen lock key
In Off mode, press it to turn X-431 PRO MINI on;
In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7
Carry strap
8
Air intake vent
9
USB/Charging port
To connect to the power adaptor for charging.
10
Microphone
11
LCD screen
12
V
OLUME +/- Key
To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen. The captured snapshot is saved in the “Screenshots” folder.
13
Speaker
14
Front camera
15
Earphone Jack
LAUNCH X-431 PRO MINI User Manual
4
1.3.3 VCI module (Only applies for 12V cars)
Fig. 1-2 VCI module
①
OBD-16 diagnostic connector
To connect on vehicle’s OBD2 DLC.
②
Mini USB port
For connecting the USB cable to the tablet to perform vehicle diagnosis. (Note: This port is disabled for X-431 PRO MINI.)
③
Mode indicato
r
y It illuminates red when the VCI module is
connected to the vehicle’s DLC.
y Blue indicates the VCI module is working in
Bluetooth mode.
1.4 Technical Parameters
X-431 PRO MINI:
Operating system
Android 5.1
Processo
r
Quad core 1.3 GHz
Memory
2GB
Storage
16GB
LCD screen
6.9 inch with a resolution of 1280 x 720 pixels
Camera
Front-facing 2MP camera + rear-facing 5MP camera
LAUNCH X-431 PRO MINI User Manual
5
Battery
3.7V/3000mh rechargeable polymer lithium battery
Connectivity
Wi-Fi: WLAN 802.11b/g/n Bluetooth: Bluetooth 4.1
Working temperature
0 ~ ℃ 45℃
Storage temperature
-10 ~ ℃ 50℃
VCI module:
Working voltage
9 ~18V
Av erage working current
About 85mA
Standby current
About 55mA
Working temperature
-10℃ ~ 55℃
Storage temperature
-20 ~ 70℃℃
Relative humidity
20% ~ 90%
1.5 Package List
While opening X-431 PRO MINI package for the first time, please carefully check the following components. Common accessories for each X-431 PRO MINI are same, but for different destinations, the accessories of X-431 PRO MINI may vary. Please consult from the local agency or check the package list supplied with X-431 PRO MINI together.
y X-431 PRO MINI tablet y Password envelope y VCI module (For connecting OBD II vehicles) y OBD II extension cable y OBD I adaptor (For connecting the non-16pin diagnostic connector and the
VCI module)
y Battery clamps cable y Power adaptors y Non-16pin connectors (For connecting non-OBD II vehicle)
LAUNCH X-431 PRO MINI User Manual
6
2 Preparations
2.1 Charging X-431 PRO MINI
1. Plug one end of the included power adaptor into the USB port of the X-431 PRO MINI.
2. Connect the other end to the AC outlet.
If
appears on the screen, it indicates it is being charged. If the logo changes
into
, it indicates that the battery is fully charged. Unplug the power adaptor
from X-431 PRO MINI.
2.2 Using your battery
If the battery remains unused for a long period of time or the battery is
completely discharged, it is normal that the tool will not power on while being charged. Please charge it for a period of 5 minutes and then turn it on.
Please use the included power adaptor to charge your tool. No responsibility
can be assumed for any damage or loss caused as a result of using power adaptors other than the one supplied.
While X-431 PRO MINI has low battery, a beep will sound. If it is very low,
X-431 PRO MINI will be switched off automatically.
2.3 Power on/off
2.3.1 Power on
Press [POWER] to turn the tool on.
Note: If it is the first time you have used this tool or the tool remains idle for a long period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5 minutes and attempt to turn on again.
2.3.2 Power off
Press [POWER] for 3 seconds, an option menu will pop up on the screen. Tap “Power off” to turn the tool off.
2.4 Tips on finger operations
Single-tap: To select an item or launch a program.
LAUNCH X-431 PRO MINI User Manual
7
Double-tap: To zoom in so that the text on a webpage appears in a column that fits your device’s screen.
Long press: Tap and hold on the current interface or area until a contextual menu pops up on the screen, and then release it.
Slide: To jump to different pages.
Drag: Tap the application icon and drop it to other location.
Spread apart/pinch together: To zoom in manually, place two
fingers on the screen and then spread them apart. To zoom out, place two fingers apart on the screen and then pinch them together.
2.5 Lock & unlock the screen
Many screen lock modes are available on X-431 PRO MINI.
Note: You are recommended to set screen lock as “None” since X-431 PRO MINI is a frequently used diagnostic tool.
2.5.1 Lock the screen
When it is ON, press [POWER] once to lock the screen; The system will lock the screen automatically after X-431 PRO MINI remains
idle over the preset standby time.
2.5.2 Unlock the screen
Press [POWER] to activate the screen and drag the
lock to “Unlock” position.
Note: If you define as unlock using the pattern, you have to draw the right target pattern to unlock it.
LAUNCH X-431 PRO MINI User Manual
8
2.6 Screen layout
There are four on-screen buttons available on the bottom of the screen.
BACK
Tap
to return to the previous screen.
HOME
Tap
to navigate to the Android’s home screen.
Recent Apps
Tap
to view the recently launched applications.
2.7 Notification panel
The notification bar is used to display some activities, such as new message, to do list and running tasks. You can also open the notification bar to view the reminder or activity notification.
2.8 Customize your desktop
2.8.1 Create a widget on the desktop
Tap and hold the desired application or widget, and then drag it to the target position.
2.8.2 Move items on the desktop
Tap and hold the item to be moved, and drag and drop it to the target location.
2.8.3 Delete items from the desktop
Warning: Deleting an icon will uninstall the corresponding application. Please be
careful to do so.
1. Tap and hold the item to be moved until it is shaken.
2. Drag it on the trash icon and release it.
Note: If no trash icon appears on the top of the screen, it indicates that the application cannot be uninstalled.
2.8.4 Adjust brightness
Tips: Reducing the brightness of the screen is helpful to save the power of X-431
PRO MINI.
1. On the home screen, tap Settings > Display > Brightness level.
2. Drag the slider to adjust it.
2.8.5 Set standby time
If no activities are made within the defined standby period, the screen will be
Loading...
+ 32 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use