Launch TLT235SCA, TLT240SCA II User Manual
LAUNCH TLT 235SCA User’s Manual
U SER ’ S MANUAL
Copyright reserved! Without the written agreement of
Launch Shanghai Machinery Co., Ltd. (hereinafter called
“Launch”), no company or individual is allowed to copy and
backup this manual in any form (electronic, mechanical,
photocopy, recording or other forms). This manual is
specifically designed for the use of Launch product, and our
company doesn’t undertake any responsibility for various
consequences caused as a result of applying it to the
guidance of operating other equipment.
In case of the equipment damage or loss due to the
accident of the user himself or third party, abuse or misuse
of this equipment, unauthorized change and repair of this
equipment, or not conforming to the operation and
maintenance requirement of Launch, Launch and its
branches won’t undertake any responsibility for the
expenses and expenditures generated.
For the equipment damage or problem caused as a result of
using other optional accessories or consumables instead of
original Launch product or its recognized product, Launch
won’t undertake any responsibility.
Official statement: The purpose of other- product- names
mentioned in this manual is to describe how to use this
equipment. Their registered trademarks still belong to the
original companies.
This equipment is for the use of professional technical
personnel or maintenance personnel.
Registered Trademark
Launch has registered its trademark in China and several
foreign countries, with the symbol of LAUNCH. Other
trademarks, service symbol, domain name, icon, and
company name of Launch mentioned in this manual belong
to the property of Launch and its subsidiary companies. In
the countries where Launch’s trademark, service symbol,
domain name, icon and company name haven’t been
registered, Launch declares its ownership on such
unregistered trademark, service symbol, domain name, icon
and company name. The trademarks of other products and
company names mentioned in this manual still belong to the
originally registered companies. Without prior written
agreement of the owner, nobody can use the trademark,
service symbol, domain name, icon and company name of
Launch and other companies mentioned in this manual. If
you have any question, please visit website of Launch:
http://www.cnlaunch.com or write to Sales Dept. of Launch
Shanghai Machinery Co., Ltd. at No. 661 Baian Road,
International Automobile City Auxiliary Parts Park, Anting
Town, Jiading District, Shanghai City to contact Launch.
i
Insured by PICC
LAUNCH TLT 235SCA User’s Manual
CAUTION
WARNING
This instruction manual is an essential integral part of
this product. Please read all instructions.
Properly keep this manual for use during the
maintenance.
Use only as described in this manual. Use only
manufacturer’s recommended adapters.
This equipment is only used for its clearly designed
purpose, and never use it for other purposes.
The manufacturer is not responsible for any damage
caused as a result of improper use or use it for other
purposes.
Always wear safety goggles.
IMPORTANT SAFETY
INSTRUCTIONS
When using your garage equipment, basic safety
precautions should always be followed, including the
following:
Only the qualified personnel having undergone special
training can operate this machine. Without the
permission of the manufacturer or not following the
requirement of the manual, any changes in the
machine part and in the usage scope may cause direct
or indirect damage to the machine.
Don’t keep the lift in the extreme temperature and
humidity environment. Avoid installation beside the
heating equipment, water tap, air humidifier or stove.
Prevent the lift from contacting large amount of dust,
ammonia, alcohol, thinner or spray adhesive, and
prevent it from rain shower.
Always disconnect equipment from electrical supply
when not in use. Never use the cord to pull the plug
from the outlet. Grasp plug and pull to disconnect.
To reduce the risk of electric shock, do not use on wet
surfaces or expose to rain.
To reduce the risk of fire, do not operate equipment in
the vicinity of open containers of flammable liquids
(gasoline).
During the machine operation, non-operators should
be kept away from the machine.
Do not operate equipment with a damaged cord or the
equipment has damaged or lost parts, until examined
by a qualified serviceman.
The lift can’t be overloaded. The rated load of the lift is
already marked on the nameplate.
Please don’t raise the lift when there are people in the
vehicle. During the operation, the customer and
spectators shouldn’t stand in the lifting area.
Keep the lifting area free from obstacle, grease,
machine oil, garbage and other impurities.
Position the swing arm of the lift, making it contact the
lifting point as recommended by the manufacturer.
Raise the carriage and confirm the lifting pad and
vehicle are closely contacted. Raise the carriage to the
appropriate working height.
For some vehicles, the parts dismantling (or
installation) will cause severe deviation of the center of
gravity, leading to unstable vehicle. The support is
needed to keep the balance of the vehicle.
Before moving the vehicle away from the lifting area,
please position the swing arm and lifting pad back
away to avoid blockage during the movement.
Use appropriate equipment and tools as well as safety
protection facilities, e.g. working uniform, safety boot,
etc.
Pay special attention to various safety marks attached
to the machine body.
Keep hair, loose clothing, fingers, and all parts of body
away form moving parts
Pay special attention not to dismantling the safety unit
of the machine or making it not functioning.
The hydraulic oil used for this lift is N32 or N46. Please
refer the safety data of grease and oil shown in the
manual.
Adequate ventilation should be provided when working
on internal combustion engines.
Launch Shanghai Machinery Co., Ltd. is dedicated
to continuously improving the product quality and
upgrading the technical spec. They are subject to
change without notice.
ii
LAUNCH TLT 235SCA User’s Manual
Caution labeling exemplify
（1）
Read operating and safety manual before using lift .
（2）
Proper maintenance and inspection is necessary for
safe operation.
（3）
Do not operating a damaged lift
！
（4）
Lift to be used by trained operator only!
（5）
Authorized personnel only in lift area.
（6）
Use vehicle manufacturer’s lift points.
（7）
Always use safety stands when removing or installing
heavy components.
（8）
Auxiliary adapters may reduce load capacity.
iii
LAUNCH TLT 235SCA User’s Manual
（9）
Clear area if vehicle is in danger of falling .
（10）
Position Vehicle with center of gravity midway between
adapters. .
（11）
Remain clear of lift when raising or lowering vehicle .
（12）
Avoid excessive rocking of vehicle while on lift .
（13）
Do not override self-closing lift controls.
（14）
Keep feet clear of lift while lowering
！
（15）
Do not stand on lift arm while rising or lowering .
(16) When operating the lift, please have earmuff on.
iv
LAUNCH TLT 235SCA User’s Manual
Table of Contents
1 Outline………………………………………………………1
1.1 Model Description………………………………………….1
1.2 Purpose…………………………………………………...1
1.3 Functions and Features…………………………………1
1.4 Technical Specifications…………………………………...1
1.5 Environmental Requirement………………………………1
2 Lift Structure…………………………………………….2
3 Operation Description……………………………………...4
3.1 Precautions for Operation……………………………..4
3.2 Preparation before Operation………………………..4
3.3 Inspection before Operation………………………4
3.4 Lifting the Vehicle………………………………………..4
3.5 Lowering the Vehicle……………………………………4
4 Hydraulic and Electrical System of the Equipment..5
4.1 Hydraulic System of the Lift……………………………….5
4.2 Electrical System of the Lift……………………………….6
5 Solutions to FAQ…………………………………..7
6 Repair and Maintenance…………………………..……….9
7 Storage and Scrap………………………………………...9
7.1 Storage……………………………………………………9
7.2 Scrap……………………………………………………….9
Grease and hydraulic oil for lift….…..……………………10
Warranty……………………………………………………….11
v
1 Outline
1.1Model Description
Model Description
TLT235SCA clear-floor 2-post lift 3.5T (7875 Lb) clear-floor 2-post lift (Symmetric and asymmetric
installation adjustable)
TLT240SCA Ⅱ clear-floor 2-post lift 4T (9000 Lb) clear-floor 2-post lift (Symmetric and asymmetric
installation adjustable)
1.2 Purpose
This machine is applicable for the lifting of various small and
medium-sized vehicles with total weight below 3.5t/4t in
garage and workshop.
1.3 Functions and Features
The cable and oil pipe are fully concealed, with decent
and elegant appearance.
Designed based on the international standard, meeting
the demand of the garage and workshop.
Top limit switch, effectively protecting the vehicle from
overhead collision.
Dual hydraulic cylinders drive, stable lifting and lowering.
Electromagnetic full-scope safety lock.
Lowering electrically, safe and simple in operation.
Adopt two steel cables for equalization, force two
carriages to move synchronously, and effectively
prevent the vehicle from tilting.
Lowest height of lifting pad is 110mm, good for repairing
low chassis or low profile car.
1.4 Technical Specifications
Loading...